Where an IPv4 solution for your clients only needs change-logging on IPbinding-to-client level, the CG-NAT requires you as an ISP to log every outgoing IPv4/port combination with timestamp to client mapping.
Which requires A LOT more storage and much more expensive equipment.
Going rate per IPv4 is up to $40 nowadays, selling of your v4 block might not be cost-efficient.
A good CGNAT implementations have support for static blocks: the subscriber always ends up a a specific ipnumber+portblock combination. (Each subscriber is assigned a specific number of exit ports and this all just logged once during startup so you always know where each subscriber ends up).
Should they run out of their assigned portblock, there are pools which you can borrow from (these need then to be logged who borrowed at what time etc). So all in all there is less logging than when everything was dynamic.
Usually, the law has specific procedures about how this information is requested, what responsibilities are with which party, and how long the response time should be for suchs a request.
When starting (or already being an ISP). You already know what kind of system you need to build that matches all these requirements by law. Simply saying, we do not have the required information wouldn't work because the law has very specific details about the requested information.*
* this is in a european country, so no clue if this is applicable to the US.
As a follow-up the agency, with the right court order, could get all the raw connection records and try to figure it out themselves. But if you don't know the exact time and (source IP, port, destination IP, port) combination you're not going to figure it out in a network with large scale NAT.
(For those who haven't heard the reference https://www.youtube.com/watch?v=FKCmyiljKo0#t=0m40s )
If cgnat keeps scaling, these ip Limiters need to phase out.
This problem would be easy to solve, if only there were some way for a website operator to phase out CGNAT and see a user's 128-bit IP address instead...
The association between IP and user/endpoint is changing, especially with the advent of Apple’s Private Relay, other privacy-protecting proxies, and increased CGNAT.
Website & hosting providers will have to adapt, but right now we’re certainly in a transition state.
Why does each individual connection have to get a port from the global allocator, rather than any of the pooling or hierarchical techniques that high performance memory allocators use?
No issues? So, how are people supposed to be able to access your machine then?
You can use IP6 or a commercial rather than domestic ISP if you really need to do it.
Looking back those 19 years, the availability and state of IPv6 has worsened for me - even though IPv4 shortage was known back then.
It's hard to understand why they don't just push through since there clearly are no real technical problems as witness by those few countries with major providers that actually actively use IPv6 (only).
On the other hand, the IPv4/v6 addresses on my A&A connection geolocate to either London or Bracknell (where their office is), about 400 miles away. I get a lot of pointless ads for things in Surrey that I have no intention of visiting.
With loose enough permissions your browser has a geolocation API that, depending on your device, will be a hell of a lot more accurate (if you have Wi-Fi hardware it can use that to work out where it is relative to the known locations of the SSIDs it can see, or straight-out use GPS).
None of this has anything to do with IPv6 - you give away some location information with your username and profile on this very site, for example.
When I lived in Ireland I only got a public IPv6, my IPv4 was behind CG-NAT. The nerd in me wasn't a fan of that on paper, but in reality I didn't have any issues with it.
I could see ISPs making a quick buck by switching to CG-NAT on IPv4 so they can sell off their IPv4 blocks.
Those IPs being recycled for servers/services doesn't seem too risky, given that they're not typically hosting anything.