News for hackers. Stuff that matters.
Re:Linux 5.0 shown to boot on ESP32 processor by codezero on Monday July 19, 2021 @03:45PM (#27886566)
This is pretty amazing. I remember the first computer I installed Linux 1.x on had 12 megs of ram in around 1992 or 1993? The smallest system I built/ran it on even back then was probably a 386 with 4MB of ram and it was so slow. Kind of amazing that after so much work, even torn down to the bare minimum it can run the modern kernel on such minimal hardware!

Edit: probably worth noting that esp32 cores are an order of magnitude higher frequency than those 90s computers.

Re:Linux 5.0 shown to boot on ESP32 processor by kevin_thibedeau on Monday July 19, 2021 @05:23PM (#27887404)
You could run a serviceable Linux console on 4MB RAM back then. X11 was also doable though it would be swapping heavily with less than 8MB.

Nowadays it would be more practical to add ESP32 support to uClinux and skip the unnecessary performance hit of the VM.

Re:Linux 5.0 shown to boot on ESP32 processor by ttctciyf on Monday July 19, 2021 @06:07PM (#27887830)
> swapping heavily with less than 8MB.

No kidding! My intro to X was seeing it load bare-bones on my enthusiast friend's 2M (could have been 4) 386.

I think he brought xfontsel up or something and you could see the scanlines being drawn one at a time :)

A couple of years later, I was running fvwm2 and a very serviceable desktop at work in 8M though. (AFAIR, anyhow.)

Re:Linux 5.0 shown to boot on ESP32 processor by anthk on Monday July 19, 2021 @06:15PM (#27887920)
FVWM2 it's even lighter and faster than TWM. Test it if you don't believe me.

With the wireframe mode, it's even faster on moving and resizing.

Re:Linux 5.0 shown to boot on ESP32 processor by bch on Monday July 19, 2021 @06:45PM (#27888153)
Moving and resizing wireframe boxes seems like to me like an ergonomic and technical win - it’s a bit baffling to me why it’s not the default everywhere, no matter what the compute/gfx capabilities.
Re:Linux 5.0 shown to boot on ESP32 processor by anthk on Monday July 19, 2021 @06:52PM (#27888205)
Yeah, it's crazy how CWM it's crazy fast on my AMD Turion 2 but windows lag a bit upon moving/resizing them.

Implementing a wireframe mode on CWM should be dumb easy and a lot of older machines would profit from that.

Re:Linux 5.0 shown to boot on ESP32 processor by anthk on Monday July 19, 2021 @06:17PM (#27887937)
Back in the day you had plenty of SVGAlib games, PDF readers and even video players. You didn't need X at all, mp3blaster/mpg123 worked crazy fast on a Pentium and with Screen you had the perfect multitasking environment for the TTY.
Re:Linux 5.0 shown to boot on ESP32 processor by mmsmatt on Monday July 19, 2021 @09:18PM (#27889151)
Elinks could render to SVGAlib well enough to browse sites that weren’t loaded with JS, no X11 needed
Re:Linux 5.0 shown to boot on ESP32 processor by anthk on Monday July 19, 2021 @09:54PM (#27889332)
Elinks? I think it's links+, which support{s,ed} SVGALIB and Framebuffer.

But back in the day you could browse without images perfectly fine, as the important ones where under galleries with custom links and downloading them was really slow.

Re:Linux 5.0 shown to boot on ESP32 processor by weinzierl on Tuesday July 20, 2021 @04:47AM (#27891371)
> "You could run a serviceable Linux console on 4MB RAM back then. X11 was also doable [..]"

This was my setup for a considerable amount of time. Even though it is hard to believe in our fast paced times it must have been for several years.

The 386DX with 4 MiB was my first Linux machine and my first PC for that matter. 4 MiB was not enough to even run the Slackware installer, so you had to partition and mkswap manually from the command line before you could run it.

Apart from that it was a pretty workable machine for those days standards. I used it from the console most of the time, but X11 worked, even if it was slow as molasses, as you said. I remember running GNU chess. While you could play from the command line it was one of the apps where the GUI was really helpful.

Good times!

Re:Linux 5.0 shown to boot on ESP32 processor by sedatk on Tuesday July 20, 2021 @12:38AM (#27890142)
True. I ran a whole university’s DNS service on a 4MB 486dx2/66 running Linux 1.2.13.
Re:Linux 5.0 shown to boot on ESP32 processor by codezero on Tuesday July 20, 2021 @01:56AM (#27890515)
We probably hung out on the same IRC channels :)
Re:Linux 5.0 shown to boot on ESP32 processor by bouncycastle on Tuesday July 20, 2021 @12:23AM (#27890042)
back in the day we've had 64KB to run our GUI and it ran fine (GEOS on c64). 4MB RAM would have been jaw dropping.
Re:Linux 5.0 shown to boot on ESP32 processor by codezero on Tuesday July 20, 2021 @01:55AM (#27890511)
I’ve come to appreciate how economical folks who experience the 8-bit era are, and it seems to be having a resurgence and I love it.
Re:Linux 5.0 shown to boot on ESP32 processor by tinus_hn on Tuesday July 20, 2021 @08:06AM (#27892738)
As long as you don’t expect it to do much. GEOS barely manages to run one application at a time while swapping continuously. It’s an impressive achievement but really not comparable to a general purpose multitasking operating system.
Re:Linux 5.0 shown to boot on ESP32 processor by bouncycastle on Friday July 23, 2021 @11:24AM (#27931716)
It was definatelly not "barely". The word processor became my workhorse for all my school assignments for a while...

Also, when writing, it's probably better not to have a multitasking OS - no distractions ;-)

Re:Linux 5.0 shown to boot on ESP32 processor by brokenmachine on Friday July 23, 2021 @03:46AM (#27928248)
You're kidding, right? GEOS was terrible. Absolutely horrible. Unusable.
Re:Linux 5.0 shown to boot on ESP32 processor by Teknoman117 on Monday July 19, 2021 @06:15PM (#27887919)
Is uCLinux even still alive? Last time I checked the main website was gone.
Re:Linux 5.0 shown to boot on ESP32 processor by kevin_thibedeau on Monday July 19, 2021 @07:28PM (#27888456)
It's merged with the mainline kernel.
Re:Linux 5.0 shown to boot on ESP32 processor by Teknoman117 on Wednesday July 21, 2021 @04:34PM (#27911772)
Is there any actual information for building it? I really am having a hard time finding anything that doesn't just link to a SourceForge repo last updated in 2016.
Re:Linux 5.0 shown to boot on ESP32 processor by swiley on Monday July 19, 2021 @10:47PM (#27889583)
So is extensa support although probably not for this one specifically.
Re:Linux 5.0 shown to boot on ESP32 processor by kjs3 on Monday July 19, 2021 @10:43PM (#27889571)
People forget (if they were even there) what was reasonable at the time. My first Linux was a 386sx with 5MB of RAM in the late 80s. It ran pretty well.
Re:Linux 5.0 shown to boot on ESP32 processor by dexterhaslem on Monday July 19, 2021 @11:05PM (#27889674)
assuming either linux or 80 was a typo here hehe
Re:Linux 5.0 shown to boot on ESP32 processor by kjs3 on Wednesday July 21, 2021 @11:15AM (#27907433)
Ug...yes, meant 90s. Must proofread...
Re:Linux 5.0 shown to boot on ESP32 processor by coupdejarnac on Monday July 19, 2021 @05:10PM (#27887292)
12 megs in 92? Fancy.
Re:Linux 5.0 shown to boot on ESP32 processor by codezero on Monday July 19, 2021 @06:13PM (#27887899)
Haha, tell me about it. I think the 4MB upgrade cost around $300 or $400 at the time? Similar to my first 1GB hard disk which came a few years later that cost $500.

I was a little spoiled since my dad worked for a telco, so we tended to have decently modern computers and modems for that reason. I was REALLY fancy when I got 128k ISDN in 1996.

Re:Linux 5.0 shown to boot on ESP32 processor by liketochill on Monday July 19, 2021 @07:21PM (#27888399)
I had 1.1 up /2.2 down mbit Adsl in 1997, was pretty awesome!
Re:Linux 5.0 shown to boot on ESP32 processor by codezero on Tuesday July 20, 2021 @01:49AM (#27890478)
I worked for an ISP so that my day job was 1mpbs, this was enough to serve 50 concurrent dialup customers back then!
Re:Linux 5.0 shown to boot on ESP32 processor by anthk on Monday July 19, 2021 @09:57PM (#27889352)
Slashdot would fly under Netscape/Opera :p. Under Lynx, it would be like switching off from a bike to an F16.
Re:Linux 5.0 shown to boot on ESP32 processor by CTOSian on Tuesday July 20, 2021 @04:58AM (#27891432)
my 1st HDD (1992) was a 20MB one ... 20 - MEGA-BYTES (about $300) and quess that I totally screwed it using the debug -mistyped some params- in order to Low-Level format it, luckily I ve managed to return it back.
Re:Linux 5.0 shown to boot on ESP32 processor by codezero on Tuesday July 20, 2021 @11:37PM (#27902083)
I worked in a lab once with a five megabyte hard drive from the 80s being used as a door stop, it was huuge, like the size of a large shoebox. They also had a WORM drive from the 80s that I dug up an ad for and it cost $25k for the writer and it could store 4Gb!!! On what looked like a laser disc in a tray. It’s wild the range of available technology at any given time, depending on how much money you have.

I do remember being very cautions when I first setup linux because things actually cared about the number of blocks, cylinders, etc, and if you got it wrong things broke in confusing ways.

Re:Linux 5.0 shown to boot on ESP32 processor by lelanthran on Tuesday July 20, 2021 @09:26AM (#27893393)
> 12 megs in 92? Fancy.

Absolute luxury! I had 4MB three years later in '95... and in '96 I got the Linux Kernel Internals book which came with a slackware CD, forcing me to purchase my first CDROM drive.

Re:Linux 5.0 shown to boot on ESP32 processor by macjohnmcc on Monday July 19, 2021 @05:41PM (#27887576)
The computer I was using at work in 92 had a whopping 16mb! It was amazing. It might have been a 386 20MHz (before the cache was added to the systems so was very slow compared to a 25Mhz that came out soon afterwards).
Re:Linux 5.0 shown to boot on ESP32 processor by pjmlp on Tuesday July 20, 2021 @01:51AM (#27890489)
Lucky you! In 1991, I moved from a Timex 2068 to PC, while the technical school was still using 8086 and 286 systems.

A 386SX with 20MHz, 40 MB and 2MB, running Windows 3.0.

16MB was indeed another level!