News for hackers. Stuff that matters.
Re:Ask HN: What under-the-radar technology are you excited a... by fasteddie31003 on Monday April 12, 2021 @03:30PM (#26784009)
Heat pumps and better insulation. It's magic how heat pumps pull heat out of thin air. I honestly think part of the reason they are not adopted as much is people can't understand them and don't trust them because of their ignorance. Insulation seems pretty boring until you start to realize how much energy can be saved by modern insulation.
Re:Ask HN: What under-the-radar technology are you excited a... by worik on Monday April 12, 2021 @04:43PM (#26784912)
They are good.

But not in very cold environments. I have one and when there is more than two degrees of frost it struggles.

So for a lot of continental areas they are almost useless since they do not function when you really need them.

For temperate climates and coastal regions they are wonderful.

Re:Ask HN: What under-the-radar technology are you excited a... by Robotbeat on Monday April 12, 2021 @04:59PM (#26785111)
I think you’ve stumbled on the REAL reason there’s hesitation with heat pumps.

There’s a massive difference in capability and efficiency and usability of heat pumps. The crappy ones don’t even work below freezing. The good ones can operate even down to -20F efficiently, even air source. And ground source ones don’t have a hard limit at all (although they face a similar wide difference in capability).

Low effort cheap heat pumps are gonna do more harm than good in that they’ll convince people that heat pumps suck.

It’s like the difference between a Tesla and a lead acid golf cart. Both are “electric” “cars”, but there’s vastly different capability.

Re:Ask HN: What under-the-radar technology are you excited a... by luxuryballs on Monday April 12, 2021 @05:44PM (#26785576)
Yeah my parents are an hour south of the Canadian border in New England and they still heat the house with a wood stove during winter for that very reason. But tell ya what that wood stove sure is amazing, keeps it very warm and it’s not a small house.
Re:Ask HN: What under-the-radar technology are you excited a... by mdip on Monday April 12, 2021 @09:26PM (#26787191)
I have a buddy who put in a fireplace insert and pellet stove. Besides the fact that he picked up very modern implementations of these two devices, he lives on a 10 acre property that's mostly Cherry Trees, so an electric log splitter was purchased along-side the fireplace insert.

He put them in after discovering that heating his house on LP (the only fuel source outside of electric available where he lives) cost about $650/mo to keep his home as warm as he wanted it. IIRC, he was basically keeping his house at 85 on those two devices, alone. He added geothermal a few years later.

His home is in the middle of the windiest parts of the thumb -- very, very cold in the winter with a lot of snow.

Re:Ask HN: What under-the-radar technology are you excited a... by KaiserPro on Monday April 12, 2021 @05:05PM (#26785178)
I have one for my 20m2 shed, it works down to -5c at least.

Granted my shed has quite good insulation, but still.

Worst comes to the worse you could use a ground source heat pump.

Re:Ask HN: What under-the-radar technology are you excited a... by worik on Monday April 12, 2021 @09:24PM (#26787181)
Yes to ground source. Obvious thing to do in a cold climate.

I am very sceptical of a Heat Pump working efficiently down to -20F (-28C in modern units)

I found -3C was the lowest. It is a new heat pump obtained with the advice of experts.

Physics. What is the operating fluid that will evaporate at -28C? As it stands I think it is untrue.

Re:Ask HN: What under-the-radar technology are you excited a... by KaiserPro on Tuesday April 13, 2021 @05:09AM (#26789874)
> What is the operating fluid that will evaporate at -28C?

remember that its operating at a much higher pressure than normal plus there is a pressure differential between the "hot" side and the "cold" side.

my refrigerant is propane, which is a gas until -48c at atmospheric pressure.

The main issue is not the refrigerant, but ice build up on the condenser coil. this (I assume) stops the airflow over the coils and generally stops the condenser from absorbing heat(ice might also be less conductive).

Re:Ask HN: What under-the-radar technology are you excited a... by 2rsf on Tuesday April 13, 2021 @03:52AM (#26789332)
Here in Sweden they are very common, my old and beaten heat pump works down to -20C (-4F) although less efficiently.
Re:Ask HN: What under-the-radar technology are you excited a... by esaym on Monday April 12, 2021 @09:51PM (#26787348)
> But not in very cold environments.

This depends on what you mean by "cold" and there are several other factors as well.

For one, they work great below 28 degrees. For the area between 28-34, there can be issues. In this range, water will more readily condense out of the air and form ice on the outdoor unit. And if it is raining and it is 34 out, you'll really have some ice.

But below 28 degrees... any water in the air is already "frozen" and you aren't going to have as big of an issue of ice spontaneously forming on a colder surface.

As long as you can get air flow across the coils on the outdoor unit you are fine, in one sense, "the colder, the better".

But that leads to the next issue: what to do when you do have ice blocking air flow? And this is when price comes into play. To my knowledge, all of the lower tier brand names (goodman, payne, bryant, maybe even ruud and rheem) will use a timer based defrost control. Basically, once the outdoor coil goes below 32 degrees, a switch is tripped and a defrost cycle will be forced after 60 minutes, whether there is ice on the unit or not. When temps are below freezing, a defrost cycle could easily take 20 minutes of extra runtime to recover the temperature. Even worse, if snow is drifted up against outdoor unit, a defrost cycle will cause it to melt into the coils which will turn into ice once the defrost cycle is over. So an unnecessary defrost could take a completely ice free outdoor unit and leave it with one side caked in ice.

To combat this issue, most of your top line brands (Trane, American Standard, Lennox, Carrier) will have "on demand" defrost so you might very well go 4+ hours of runtime and never see a defrost. However, each brand has their own quirks and can still end up with unnecessary defrost cycles if the air flow through the indoor unit (dirty filter) is poor or if the system refrigeration charge is not 100% perfect.

The other thing that seems to get people is run times. In the south in 100+ degree temps, you can expect your A/C to run for 12 hours in a 24 hour period. Yet for some reason, when a heatpump runs for 2+ hours straight when it is 20 degrees outside, people flip out that it's running too long and going to blow your electric bill up so they flip it over to electric only/emergency mode.

Let's do the math... your heat pump is running for hours on end, drawing 3kwh every hour. You freak out and flip it to emergency mode which turns on a 20kw electric heater and the unit now runs for 30 minutes followed by a 30 minute off cycle. You think it is only using "half" the electricity because it is running half as much. But the reality is, you are now using 10kwh every hour.

Call me crazy, but I don't think it was politics or frozen natural gas that lead to the 2021 Texas blizzard power outage, but people with heat pumps that have no idea what they are doing. Even before temps were freezing, several local community groups on facebook had people spamming "it's going to get below 32 tonight, so for you heat pump users, make sure you put it in emergency heat mode!". And then to make matters worse, local HVAC companies, with the large influx of people complaining their heat pump had been running for "hours on end", start chiming in saying "it's too cold, go to emergency mode"... Meanwhile, I'm somewhat new to heat pumps myself, but I had forced mine to only use electric heat when in defrost mode. It ran flawlessly, I was very impressed. The vents were blowing 90 degrees all the way until it was 20 degrees out. Once it was 6 degrees out, it was blowing 81 out the vents, but still enough to hold temperature in the house (66). On the worst day, I had a combined runtime of 16 hours with 7 defrost cycles. My bill for the whole month was $140 (the highest ever), while all my neighbors that tried to "save" money by going to emergency mode had bills of $300+.

Re:Ask HN: What under-the-radar technology are you excited a... by extraduder_ire on Monday April 12, 2021 @11:24PM (#26787809)
Is there some reason why heat pumps don't spray some antifreeze/salt-brine on the evaporator to clear/prevent ice? Either alone, or in conjunction with heating.

You seem like the right person to ask, and this idea has been stuck in my head since seeing the technology connections video.

Re:Ask HN: What under-the-radar technology are you excited a... by esaym on Tuesday April 13, 2021 @08:35PM (#26801547)
Any kind of antifreeze or salt would be an environment issue, never mind the issue of it corroding metal.

Ice build up and "defrost cycles" are not really an issue if managed right. But the issue is people buying the cheapest option and expecting the greatest performance.

HVAC tech knowledge is also an issue. Most techs are going to do the bare minimum in order to close out a job and move on to the next project/service call. There is really no incentive for educating end users on how their "system" works.

Re:Ask HN: What under-the-radar technology are you excited a... by slig on Monday April 12, 2021 @04:06PM (#26784481)
Related Technology Connections video: https://www.youtube.com/watch?v=7J52mDjZzto
Re:Ask HN: What under-the-radar technology are you excited a... by alpaca128 on Monday April 12, 2021 @04:22PM (#26784664)
Almost all new houses are built with heat pumps where I live because it's kind of a no-brainer in those situations. And I see one old house after the other being wrapped in new thick isolation.

But heat pumps in old homes just aren't a thing because it's expensive and a lot of work to adapt the house's existing heating. People do understand it, they just don't want to bother with that.

Re:Ask HN: What under-the-radar technology are you excited a... by frosted-flakes on Monday April 12, 2021 @05:41PM (#26785551)
What is "isolation"? Is that a typo of "insulation"?
Re:Ask HN: What under-the-radar technology are you excited a... by alpaca128 on Monday April 12, 2021 @05:58PM (#26785699)
Force of habit. In my native language we use the same word for isolation and insulation.
Re:Ask HN: What under-the-radar technology are you excited a... by Kim_Bruning on Monday April 12, 2021 @06:07PM (#26785772)
I was trying to narrow it down, but it turns out a lot of languages do that.
Re:Ask HN: What under-the-radar technology are you excited a... by 35mm on Monday April 12, 2021 @03:53PM (#26784313)
For new homes absolutely. In the UK gas boilers are the norm and every new home should have a heat pump instead.

But retrofitting requires a lot of work - replacing radiators with much larger ones, maybe ripping out pipes, and for ground source digging up the garden / street.

Re:Ask HN: What under-the-radar technology are you excited a... by jayflux on Monday April 12, 2021 @05:31PM (#26785465)
> For new homes absolutely. In the UK gas boilers are the norm and every new home should have a heat pump instead.

This is already happening. Redrow for example are focusing on new heating technology for new homes in preparation for the boiler ban

Re:Ask HN: What under-the-radar technology are you excited a... by closeparen on Monday April 12, 2021 @09:19PM (#26787146)
My condo uses a water source heat pump. It took me more than a few minutes to understand, but it’s so sensible. The building runs water in a loop through all the units. An individual unit’s heat pump can either add energy to or take energy from the water. If the water is too hot it can be cooled in a cooling tower on the roof, and if too cold it can be heated in a central water heater. The unit lives in an interior closet and there is no outdoor component, yet it’s central A/C.
Re:Ask HN: What under-the-radar technology are you excited a... by jayflux on Monday April 12, 2021 @05:24PM (#26785394)
In the UK there will be a gas boiler ban on new builds in 2025. That’s when we will start to see a market for these.

> I honestly think part of the reason they are not adopted as much is people can't understand them and don't trust them because of their ignorance.

I think there’s genuine reason right now.

For existing houses it only makes sense if you have really good insulation which rules a lot of people out. That’s why they’re only being focused on new builds, so they can guarantee the insolation is adequate.

They’re expensive (for existing housing) and the returns aren’t quite there yet. Parts and expertise are also quite limited compared to boilers (the market isn’t really there yet).

It also depends what climate you live in for how useful they will be

Re:Ask HN: What under-the-radar technology are you excited a... by standardUser on Monday April 12, 2021 @04:36PM (#26784830)
Energy efficiency technology has been an unsung hero for decades now. It's probably done more to mitigate carbon emissions than any other effort to date.
Re:Ask HN: What under-the-radar technology are you excited a... by screaminghawk on Monday April 12, 2021 @03:43PM (#26784187)
It's cost for me. Electricity isn't cheap where I live and when your house is poorly insulated you require even more energy for a heat pump.
Re:Ask HN: What under-the-radar technology are you excited a... by martythemaniak on Monday April 12, 2021 @05:27PM (#26785426)
Me too. I've been obsessing over geothermal systems for a while and I think there's a lot of opportunity there. I wrote this essay to clear up my thinking: https://www.greennewdealio.com/heating/robot-mole/
Re:Ask HN: What under-the-radar technology are you excited a... by 2rsf on Tuesday April 13, 2021 @04:03AM (#26789429)
Geothermal is not uncommon here in Sweden, I think that some goes deep instead of wide maybe because we have a lot of rocky ground which is easier to drill into.

But like your article says the installation is too expensive for the expected savings. There is another problem you didn't bring up and is scalability, geothermal works fine for detached houses but not so great in a city where most of the energy goes to.

District heating is a great solution for denser population areas, here we burn trash and solve two problems, and in theory it can be combined with Geothermal heating

Re:Ask HN: What under-the-radar technology are you excited a... by divbzero on Monday April 12, 2021 @05:03PM (#26785162)
Along the same line of thinking, tankless water heating [1] seems like a no-brainer. It surprises me that places like the US have not used it as the default from the start.

[1]: https://en.wikipedia.org/wiki/Tankless_water_heating

Re:Ask HN: What under-the-radar technology are you excited a... by frosted-flakes on Monday April 12, 2021 @05:49PM (#26785623)
Why not heat pump water heaters? Those are even more energy-efficient.
Re:Ask HN: What under-the-radar technology are you excited a... by signalandnoise on Monday April 12, 2021 @05:27PM (#26785419)
there have got to be better ways to optimize the design of boilers, surely this is a RF learning problem against heat equations.