News for hackers. Stuff that matters.
Re:CA crews handle tricky fire at Tesla factory by userbinator on Friday March 12, 2021 @09:43PM (#26443419)
"press" is a bit of a misnomer, as it actually does die casting.
Re:CA crews handle tricky fire at Tesla factory by JohnJamesRambo on Friday March 12, 2021 @11:02PM (#26443843)
Thank you for this I was trying to figure out what was being pressed exactly.

What is special about the GigaPress die casting?

Re:CA crews handle tricky fire at Tesla factory by Robotbeat on Saturday March 13, 2021 @01:14AM (#26444430)
Being able to make large, complex parts in seconds to high tolerances. A way cheaper way to make a car if you figure it out.
Re:CA crews handle tricky fire at Tesla factory by baybal2 on Saturday March 13, 2021 @06:01AM (#26445769)
> Being able to make large, complex parts in seconds to high tolerances.

You don't get that high tolerances with casting the bigger you go. Thermal warpage needs correction, and there is only so much you can correct.

But the machine in question is used for a process much closer to injection molding than casting.

MIM is somewhat better with warpage

Re:CA crews handle tricky fire at Tesla factory by Robotbeat on Saturday March 13, 2021 @12:32PM (#26448145)
Correct, this isn’t mere casting. It is die casting, with really good surface finish (which matters for strength) and good tolerances once you iteratively take warpage into account.

And a big reason they didn’t use this in the past is you’d get bubbles which reduce strength dramatically. But improvements in process tech and ability to use X-rays to do fast, non-destructive evaluation allows near-forged material properties. Better than castings of years past.

Re:CA crews handle tricky fire at Tesla factory by HPsquared on Saturday March 13, 2021 @06:13AM (#26445825)
It's all relative, the basis for comparison is a standard automotive structure: stamped steel parts welded together.
Re:CA crews handle tricky fire at Tesla factory by baybal2 on Saturday March 13, 2021 @06:30AM (#26445899)
Stamped steel is excellent on manufacturability, warpage, and speed of manufacturing included.

The industry after all spent a century working with it.

Aluminium alloys bring along own problems, but otherwise unbeatable on weight even if very weight inefficient methods are used, like casting.

It's a very complicated compromise even if economics is not involved.

Re:CA crews handle tricky fire at Tesla factory by gibolt on Saturday March 13, 2021 @01:34AM (#26444529)
Injection apparently happens in milliseconds, which is crazy at the scale of half a car.
Re:CA crews handle tricky fire at Tesla factory by baybal2 on Saturday March 13, 2021 @05:38AM (#26445638)
But you get weaker parts
Re:CA crews handle tricky fire at Tesla factory by Robotbeat on Saturday March 13, 2021 @12:34PM (#26448159)
Not really any more. X-rays and other process improvements have allowed modern die casting to approach hot forged properties. You don’t get grain flow as good as cold forging, but it’s pretty dang good now.
Re:CA crews handle tricky fire at Tesla factory by bathtub365 on Saturday March 13, 2021 @11:29AM (#26447610)
Is this intended to fix the misaligned body panels I constantly see on other Tesla models?
Re:CA crews handle tricky fire at Tesla factory by edoceo on Friday March 12, 2021 @10:37PM (#26443699)
Die cast? Just like Matchbox!