Re:CA crews handle tricky fire at Tesla factory
by Robotbeat on Saturday March 13, 2021 @12:32PM
(#26448145)
Correct, this isn’t mere casting. It is die casting, with really good surface finish (which matters for strength) and good tolerances once you iteratively take warpage into account.
And a big reason they didn’t use this in the past is you’d get bubbles which reduce strength dramatically. But improvements in process tech and ability to use X-rays to do fast, non-destructive evaluation allows near-forged material properties. Better than castings of years past.
Re:CA crews handle tricky fire at Tesla factory
by HPsquared on Saturday March 13, 2021 @06:13AM
(#26445825)
It's all relative, the basis for comparison is a standard automotive structure: stamped steel parts welded together.
Re:CA crews handle tricky fire at Tesla factory
by baybal2 on Saturday March 13, 2021 @06:30AM
(#26445899)
Stamped steel is excellent on manufacturability, warpage, and speed of manufacturing included.
The industry after all spent a century working with it.
Aluminium alloys bring along own problems, but otherwise unbeatable on weight even if very weight inefficient methods are used, like casting.
It's a very complicated compromise even if economics is not involved.
You don't get that high tolerances with casting the bigger you go. Thermal warpage needs correction, and there is only so much you can correct.
But the machine in question is used for a process much closer to injection molding than casting.
MIM is somewhat better with warpage