Somewhat tangentially, there is a (strong) argument that twin-engine aircraft are actually safer than three or four engine aircraft. First, they are at lower risk of having an engine problem (as they have fewer engines). Second, the requirements all focus on having sufficient performance with a single engine out, which means that a twin engine aircraft normally has at least 200% of the power required to keep it aloft, whereas the four-engine aircraft only has 133% of what it needs. Given that many problems can be solved with a sufficient application of power, the twin-engine airplane is actually at an advantage!
I first heard this from a lecture by Henry Pohl (a truly brilliant engineer): https://ocw.mit.edu/courses/aeronautics-and-astronautics/16-...
A jet requires a lot less power to cruise than to take off. Normally they’d operate at 80-90% power when cruising, but they can stay airborne with much less power.
How much power it takes to stay airborne depends on many factors, such as weight, altitude, wind conditions and temperature, but 747s have been known to fly and land safely with just two engines.
The rule you talk about is more clearly applicable to rockets that run at 100% for most of the flight.
https://en.wikipedia.org/wiki/List_of_airliners_by_maximum_t...
I can imagine this being the case mainly because the calculation is assuming 1 engine failed.
Given this, and assuming an almost maximum payload, would there necessarily be scenarios here for the 747 to be more fuel efficient?
Having extra power helps you climb to cruising altitude quickly. This is a significant consideration, as a great deal of fuel expenditure takes place during the climb through dense, drag-inducing atmosphere.
Engines and aircraft structure are non linear in both up-front cost, maintenance, and economy. Two larger engines have about half as many parts as four smaller ones, impacting production costs and service requirements. Larger fans are also more efficient than smaller ones for a variety of reasons. Fuel systems and aircraft structures are also simpler, lighter, and less expensive with fewer engines.
The A300 brought ETOPS, quickly followed by the 767.
It was a design decision to be a people mover. [0]
0: https://www.flexport.com/blog/airbus-a380-no-cargo-equivalen...
I guess you mean "cargo conversion"?
The A380 wasn't designed for cargo so the economics don't work out for many cargo loads. It's also limited in what airports it can operated out of. I'm sure there is some route out there where it will end up as an ideal freighter when they start retiring from passenger service, but it is not very flexible. Definitely not where you'd want to start building out your cargo fleet.
https://www.businessinsider.com/boeing-747-resurgence-in-car...
The A380 never was a cargo plane, big that it is. It also has the four engines with the added maintenance.
Not sure if it would make any economic sense, but maybe it could if the layout could be changed rapidly, with a passenger cabin "slotted in" when needed.
Exceptions being some airlines which are able to operate hub and spoke models and where fuel is cheap like the middle east airlines.
Wouldn't these types of planes be more suitable for a role in logistics which can benefit the greater density of packing?
I am guessing this is something to do with fuel savings, and new composite materials meaning that smaller planes are still more efficient. However, would that necessarily apply to recent 747s/a380s which I think have composite materials and can be retrofitted to efficient engines? I figure these specific planes must be on sale as they are withdrawn from service so I am curious about the use of 767s here.