To be honest, I really don't know a good KiCad tutorial. I kind of just banged myself against it until I learned. But, I had previous experience with Eagle, Altium, and Cadence Allegro.
Das U-Boot is the embedded bootloader and is pretty standard for embedded ARM systems (and others! https://github.com/u-boot/u-boot/tree/master/arch).
On a dev-board prototype before, I had also used Buildroot (https://buildroot.org) to create the minimal root filesystem image. This time around, I decided to use Debian since it makes installing packages I want much easier. For example, I can just apt-get install the USB wifi firmware packages instead of hunting them down and including in a manually generated image. It's still using a custom compiled kernel though, since I have custom drivers for things like the graphics hardware.
I'm trying to use Rust for as much as possible (I like Rust a lot). The STM32L0 runs rust, I bodged together a framebuffer driver in Rust, and the games in userspace are also in Rust. I'll post about the Rust framebuffer driver at some point.
Shout out to the Real Time For the Masses project (it's an RTOS) I used: https://github.com/rtfm-rs/cortex-m-rtfm
https://www.youtube.com/watch?v=vaCVh2SAZY4
(first video of a series of 10)
P.S: I'm the ultimate noob on these topics.
Just mastering Ki-CAD is an accomplishment. I learned circuit design with P-CAD. And it was anything else but intuitive. Playing around with Ki-CAD reminded my of thise days.
Can you recommend a good Ki-CAD tutorial?
Can you elaborate a little bit on the mistakes you made and what led to the choices you made? E.g. first time read about Das U-Boot.