News for hackers. Stuff that matters.
Re:Windows XP minimal-requirement experiments (2006) by jplayer01 on Sunday November 03, 2019 @05:20PM (#21437120)
So, out of curiosity, what’s the fastest PC that will still work on 95, 98, XP respectively?

I recently tried installing XP on my desktop and, despite it being old enough to still be compatible and have drivers available, I wasn’t able to ever get it installed. I’m still trying to figure it out. I certainly don’t remember it being this difficult the last time I tried it... (before 2010?)

Re:Windows XP minimal-requirement experiments (2006) by bcaa7f3a8bbc on Sunday November 03, 2019 @06:01PM (#21437362)
Windows XP installation CD doesn't have AHCI driver and cannot recognize hard drives on most computers since 2008, and only allows you to load an external device driver via a floppy disk, which is obviously not helpful. You can set your SATA controller to IDE mode in BIOS to install, but there's a performance penalty, and because of how Windows XP handles disk drivers, it's difficult if not impossible to enable native AHCI after Windows XP is already installed, you are likely to get a BSoD after you flip the switch.

A better choice is patching the installation disc to bundle a AHCI driver in it, works like a charm.

First, download and install nLite [0], a Windows installation disc modding tool, and then download a copy of Rapid Storage Technology driver from Intel (in zip format) [1] and decompress it. Finally, open your Windowx XP disc image in nLite, bundle driver "iaAHCI.inf", and burn a new CD. You can find a lot of tutorials on the web [2]. You may need to bundle other essential drivers as well, USB and Ethernet comes to mind.

I still have a Windows XP SP3 CD in my CD collection, it is the original MSDN version with an AHCI driver bundled, although I haven't used it in the last 6 years or so...

[0] https://www.nliteos.com/

[1] https://downloadcenter.intel.com/download/23295/Intel-Rapid-...

[2] https://www.prime-expert.com/articles/b02/installing-windows...

Re:Windows XP minimal-requirement experiments (2006) by orionblastar on Monday November 04, 2019 @12:49AM (#21439316)
If you bundle the SATA drivers with the CD it will find the SATA hard drive and format it.

There was also a WinUltra DVD that had Windows 2000, XP, and 2003 on it that had driver packs on it for every SATA device at the time. It also had a Tiny install with just the basics of the OS like XP. Used 48M RAM small hard drive space as well.

You could slipstream an install disk with driver packs using this website http://driverpacks.net/

I liked SP2 better than SP3 because SP3 needed more RAM or else it ran slow on a PIII like my father's PC and it had some sort of Vista features in it.

Someone did leak the MSDN ISO files on the Internet but Microsoft shut it down. The MSDN disks were always up to date.

Windows XP lost Internet support for IE and Firefox is no longer made for it. I know people who still run it for the old apps they bought and still using them. Microsoft Office 97 or Lotus Smartsuite 99 run great on XP.

Re:Windows XP minimal-requirement experiments (2006) by Jaruzel on Monday November 04, 2019 @02:54AM (#21439686)
> I liked SP2 better than SP3 because SP3 needed more RAM or else it ran slow on a PIII like my father's PC and it had some sort of Vista features in it.

Bear in mind that for WiFi you only get WPA2 support with SP3.

Re:Windows XP minimal-requirement experiments (2006) by xattt on Sunday November 03, 2019 @06:33PM (#21437550)
The NT/2k/XP installers prompted the user to load a controller driver from a floppy. Would this serve as a fix for the problem you describe or are you referring to installing Windows XP on something modern-day?
Re:Windows XP minimal-requirement experiments (2006) by bcaa7f3a8bbc on Sunday November 03, 2019 @06:41PM (#21437585)
Yes. I did mention this possibility in my original comment, however, don't expect to find a floppy drive on modern machines with AHCI...
Re:Windows XP minimal-requirement experiments (2006) by soganess on Sunday November 03, 2019 @06:54PM (#21437653)
Could a usb floppy drive work?

Oldows support for something like that might be dicey. I wonder why one would just not run 32bit(better compat) windows server 2003. A bit of setup for desktop use for sure. That said, if you are going down this road, you are already rolling your sleeves up.

Re:Windows XP minimal-requirement experiments (2006) by jasomill on Sunday November 03, 2019 @10:39PM (#21438842)
Assuming proper (non-UEFI!) BIOS support, it should.

Evidence: HP's instructions for installing Windows XP from retail media on (ca. 2012) Zx20 workstations

http://h10032.www1.hp.com/ctg/Manual/c03366531

list "(USB) Floppy Diskette Drive" as one of the hardware requirements.

As for storage, the Z820, at least, includes an XP-compatible LSI 6Gbps SAS controller onboard in addition to SATA, so performance with SAS and/or SATA drives shouldn't be an issue.

High core count, dual-socket Z820s are readily available on the used market for <$1,000, and seem like they'd make excellent high-end XP boxes (and even better Windows 10/Linux boxes; I'm running both under ESXi with GPU passthrough on mine; licensing issues aside, current [10.14 and 10.15] OS X versions also work, including GPU passthrough, at least in the case of the NVIDIA Quadro K2000 and Apple-supplied drivers).

More generally, XP-compatible 6Gbps SAS PCIe RAID cards and HBAs are readily available on eBay for peanuts, so that'd probably be the way to go if you want the best disk performance under XP with (relatively) modern hardware.

Re:Windows XP minimal-requirement experiments (2006) by fuzzfactor on Monday November 04, 2019 @06:56AM (#21440812)
USB floppy drives work as designed to install SATA drivers during XP Setup.

You push the F6 key when prompted just like NT Setup where you would add SCSI drivers if needed from a manufacturer's OEM floppy.

The OEM (F6) floppy for your specific SATA hardware will contain a fileset with their basic drivers and a TXTSETUP.OEM text file referencing that particular Device ID as well. These floppy contents are often included in a small folder in the manufacturer's full unzipped SATA driver setup files.

There are workarounds if you don't have a floppy, see my other message.

Any proper BIOS serves USB devices to DOS no differently than legacy hardware, even if it is optional to be enabled when needed. You do have to plug in USB drives, kybd, mouse before turning on the PC but then DOS or W9x can boot from or access them best usually without USB drivers installed in the OS. USB-connected non-80's-legacy devices like webcams would be recognized by W9x only if the USB hub they were on had been properly installed beforehand to the somewhat uncommon USB-enabled W9x, but still would not work unless you had the device-specific W9x USB drivers for windows installation of the exact cam. Cams like this were the kind of thing that actually used windows drivers and would work after windows was booted without having to plug them in beforehand.

Re:Windows XP minimal-requirement experiments (2006) by bcaa7f3a8bbc on Sunday November 03, 2019 @07:07PM (#21437726)
> Could a usb floppy drive work?

I don't have one. What kind of device interface do USB floppy drives use, and does Windows XP have drivers? I highly doubt it (edit: others have pointed out that they use USB-FDD mode and is supported by Windows XP, so yes.).

The reason I don't have one is that although I have floppy drives, but I cannot find a single working blank floppy anymore... A floppy emulator that uses an SD card and the identical floppy interface should have better compatibility (but without the convenience of Plug & Play like USB), and you don't have to find a source of working floppy.

Re:Windows XP minimal-requirement experiments (2006) by soganess on Sunday November 03, 2019 @07:13PM (#21437766)
That's a brilliant idea. I didn't realize that existed, but it seems so obvious after you said it.
Re:Windows XP minimal-requirement experiments (2006) by bcaa7f3a8bbc on Sunday November 03, 2019 @08:00PM (#21438036)
Consider the huge number of legacy industrial systems that are still using floppies today, the existence of floppy emulators is not a coincidence.
Re:Windows XP minimal-requirement experiments (2006) by seba_dos1 on Monday November 04, 2019 @09:16AM (#21441776)
You could even use a mobile phone or something like Raspberry Pi (Zero or 4) as a USB gadget to emulate floppy drive.
Re:Windows XP minimal-requirement experiments (2006) by jotm on Monday November 04, 2019 @06:45AM (#21440751)
IIRC even a USB drive in HDD mode with the appropriate drivers (they were different based on chipset) will work. It's been a long time since I've done it, but I remember installing the AHCI driver from a USB drive or even a partition on the internal hard drive.

Later on I found you could integrate the driver into the WinXP installation CD itself.

Re:Windows XP minimal-requirement experiments (2006) by throwaheyy on Sunday November 03, 2019 @08:15PM (#21438126)
Might work on motherboards with a bIOS implementation, there’s often a “legacy” mode that emulates a FD interface making a USB floppy bootable and accessible from Windows Setup. Likely not the case for any UEFI motherboard.
Re:Windows XP minimal-requirement experiments (2006) by jasomill on Sunday November 03, 2019 @10:59PM (#21438917)
All recent[1] non-UEFI (BIOS only) and UEFI/BIOS hybrid systems I've used provide BIOS emulation for both floppy drives (using USB floppy drives) and hard drives (using USB mass storage devices; e.g., I have MS-DOS 6.22 installed on an MBR-partitioned USB flash drive that I regularly use to flash firmware updates, etc.).

Pure UEFI ("class 3") firmware without BIOS support won't boot (32-bit?) XP at all; as for whether native UEFI drivers are typically provided for USB (or any other) floppy drives, I have no idea.

[1] Qualification because I recall having trouble booting from USB optical and flash drives on at least some USB-capable systems that predate XP, but haven't had a problem with USB boot on any system in at least a decade.

Re:Windows XP minimal-requirement experiments (2006) by qplex on Monday November 04, 2019 @02:44AM (#21439652)
I recently did this and can confirm it works.

You can also use Rufus [0] to write the XP image to a USB stick and skip the hassle with CD-R(W)s.

[0] https://rufus.ie/

Re:Windows XP minimal-requirement experiments (2006) by FooHentai on Sunday November 03, 2019 @07:25PM (#21437837)
>only allows you to load an external device driver via a floppy disk, which is obviously not helpful.

You can get around this, there are USB drives that can be switched to a mode that presents as a floppy drive.

Re:Windows XP minimal-requirement experiments (2006) by bcaa7f3a8bbc on Sunday November 03, 2019 @08:04PM (#21438058)
Thanks for the tip. I forgot the USB-FDD mode completely...
Re:Windows XP minimal-requirement experiments (2006) by gambiting on Monday November 04, 2019 @04:32AM (#21440091)
Or you can just embedd the AHCI driver into the ISO before burning it, so it will just start the setup with correct driver already present.
Re:Windows XP minimal-requirement experiments (2006) by est on Sunday November 03, 2019 @09:26PM (#21438487)
> load an external device driver via a floppy disk

Many Chinese Flash Drive allows you to emulate USB-CDROM, USB-HDD even USB-FDD.

Re:Windows XP minimal-requirement experiments (2006) by fuzzfactor on Monday November 04, 2019 @07:29AM (#21440974)
To install XP on a SATA HDD using most common install CD's it's easiest to set a modern mainboard BIOS (or BIOS/UEFI) to be in IDE or Legacy mode beforehand instead of the default AHCI/SATA setting. This way the XP Setup will see the physical SATA HDD as if it was an older IDE type and have no problem copying files from XP install CD's which do not contain any SATA drivers.

If you do have the proper SATA hardware drivers needed for this type of XP install to be in SATA mode, you still would need an actual floppy to install them from during XP Setup the recommended way, which does work ideally if you've got it.

Without the NT floppy routine, using the vendor's Setup file, most of the time you can not install the SATA/AHCI drivers for XP after you have first installed XP in the default IDE/Legacy mode. The Device ID's are not the same in these two different modes.

There is a workaround, easier than it sounds.

You can manually add the SATA drivers in XP (after installing the OS wth the HDD in IDE/Legacy mode) easiest if you have a copy of the files that would be found on the hardware vendor's "F6 Setup Floppy" for that particular AHCI hardware.

These can often be found after unzipping the full XP drivers for that hardware. There will be a small folder (less than 1.44 mb) sometimes just labeled F6, it will contain the minimal SATA drivers needed on the floppy during the setup phase, and a TXTSETUP.OEM text file that would be used by the XP Setup routine if you actually had a floppy drive, USB or not. The XP Setup step where you have the chance to use an actual floppy to preinstall non-standard drivers for show-stopping devices was mainly intended for installations to SCSI drives originally.

Other times there may not be dedicated floppy provisions and you have to select the regular non-F6 SATA drivers for XP from where you have them unzipped to. They can also sometimes be considered RAID drivers even when you are not going to use RAID.

I copy these files to a new AHCIREG folder on the C: volume.

I copy my old instructions from how I did it last time using different hardware, this is an INSTRUCTIONS.TXT file which I add to the folder.

I copy the old AHCI.REG file that I used to modify the XP registry last time for different hardware, in the form of a text file, this adds AHCI.TXT to the folder.

I then modify these two text files to fit the current set of hardware.

INSTRUCTIONS.TXT is like a manual script, crafted from the previous one, using an open parenthesis on lines from earlier versions that are not executed in the current version. Basically documents which files to manually copy and install.

Here's one to add SiS drivers to a Dell, where my Instructions and REG file are derived from earlier Intel procedures:

Begin INSTRUCTIONS.TXT

add AHCI drivers in IDE mode then switch to sata mode

(this time ICH9 has already been installed in IDE mode

(this time there are no ICH9 drivers yet

(this time "7 Series/C216" chipset driver has already been installed in IDE mode

this time xp standard dual channel pci ide controller has already been installed in ATA mode

with xp successfully installed in IDE mode:

(try R173416.exe, for SATA on XP (-this dell package fails, but before cancelling the install, it appears unzipped (in c:\windows\temp\IIF (-copy it and use it later

run SiS_SATA_A01_R198505.exe, it unzips to the dell\drivers folder

copy SISAHCI & TXTSETUP.OEM from dell\drivers\R198505\FloppyImage\968\1184 to this "AHCIREG" folder

copy contents of dell\drivers\R198505\FloppyImage\968\1184\RAID\Winxp_2k to this "AHCIREG" folder

(copy contents of IIF\Winall\Driver\ to this "AHCIREG" folder

(-unzip the SATA drivers from ASUS

(copy contents of IRST_XP_VER11101006\Driver\Disk\32bit to this "AHCIREG" folder

(from the AHCI32_11_2_1006 folder: (copy contents to this "AHCIREG" folder

(copy iaAHCI.inf & iaAHCI.cat, iastor.inf & iastor.cat to INF folder

(copy iastor.sys to c:\WINXP\SYSTEM32\drivers

copy sisraid4.inf & sysraid.cat to INF folder

copy sisraid4.sys to c:\WINXP\SYSTEM32\drivers

copy PROPERTY.dll to c:\WINXP\SYSTEM32

(in the INF folder, right click on iaAHCI.inf, hit INSTALL

(in the INF folder, right click on iastor.inf, hit INSTALL

in the AHCIREG folder, right click on sisraid4.inf, hit INSTALL

(copy iaAHCI.inf & iaAHCI.cat to INF folder

(copy ibexAHCI.inf & ibexAHCI.cat from c:\IPMx2\All\ to INF folder

(copy iaAHCI.inf & iaAHCI.cat FROM c:\WINDOWS\NLDRV\001\ to INF folder

(copy iastor.sys to c:\WINXP\SYSTEM32\drivers

(copy iastor.sys from c:\WINDOWS\NLDRV\001\ to c:\WINXP\SYSTEM32\drivers

(right click on iaAHCI.inf, hit INSTALL

(right click on ibexAHCI.inf, hit INSTALL

run this AHCI.REG

reboot and switch to SATA mode in bios, then wizard will install the whole sata package in windows

End INSTRUCTIONS.TXT

Modify the Instructions to work with the current hardware then save it and follow it. You will basically be manually copying the drivers and any dependencies into the c:\windows\system32 folder & subfolders as needed for that hardware, copying the corresponding INF file(s) and associated CAT files to the regular INF folder, then manually installing the INF file from there.

Note that for this SiS AHCI chip there was a dependency on not only their .SYS driver to be in the regular drivers folder, but also the PROPERTIES.DLL to be in the regular folder with most DLLs. Dependencies like this will be seen in the text of the INF file, when there is a TXTSETUP.OEM file these dependencies will also be listed within, even though TXTSETUP.OEM is only for floppy usage.

Then there is my AHCI.TXT file which was modified to be completely specific for this Dell SIS AHCI hardware according to its Device ID(s), Service, .SYS driver, and DisplayName:

Begin AHCI.TXT

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\CriticalDeviceDatabase\PCI#VEN_1039&DEV_1184]

"Service"="sisraid4"

"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"

[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\CriticalDeviceDatabase\PCI#VEN_1039&DEV_1185]

"Service"="sisraid4"

"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"

[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\sisraid4]

"Type"=dword:00000001

"Start"=dword:00000000

"Group"="SCSI miniport"

"ErrorControl"=dword:00000001

"ImagePath"="system32\\drivers\\sisraid4.sys"

"tag"=dword:00000019

"DisplayName"="SiS 1185 AHCI Controller"

End AHCI.TXT

You customize the AHCI.TXT for your exact machine, save a copy, then save another copy renaming it as AHCI.REG.

The needed AHCI Device ID's are in the matching AHCI INF (which will be similar but not exactly the same as the IDE-mode Device ID when the same hardware is installed in IDE mode)

So overall after placing a correct INF file in the regular folder, with all its dependencies in their proper folders you run your custom AHCI.REG file and it adds that exact SATA hardware and driver to the Critical Device Database in the Registry so it will load earlier in the bootup routine not much differently than it would if you had used the floppy during Setup.

Then you reboot to the BIOS Setup and change from IDE-mode to SATA/AHCI and you will get to the desktop.

From that point you can then run the vendor's full XP SATA driver install or update routine and it can add more features than the floppy alone would have done, since the device ID's will then match.

If the previous/default IDE drivers have not been removed, the partition should boot with BIOS in either SATA or IDE mode afterward.

Re:Windows XP minimal-requirement experiments (2006) by Denvercoder9 on Sunday November 03, 2019 @06:17PM (#21437453)
This link about Windows 95 crashing when it has too much RAM was posted on HN recently: https://devblogs.microsoft.com/oldnewthing/20030814-00/?p=42...
Re:Windows XP minimal-requirement experiments (2006) by Laforet on Sunday November 03, 2019 @05:38PM (#21437237)
For Intel platforms, drivers for Windows 98 were provided up to the Northwood Pentium 4 era (8xx chipsets). Windows XP support lasted a bit longer but it was rather patchy by the Core 2 era and seems to have totally dried up by 2010. Nevertheless Intel has recently purged a lot of older drivers and documentations from their website so it's hard to be sure.

ATI dropped XP support in 2013, nVidia have actually managed to ship Windows XP drivers until 2016.

Re:Windows XP minimal-requirement experiments (2006) by Splognosticus on Sunday November 03, 2019 @05:29PM (#21437175)
It's not Windows 95, but a while back LGR did try installing MS-DOS 6.22[1] on a modern gaming PC. Things got weird basically immediately but it did more or less work.

[1] https://www.youtube.com/watch?v=bS9hiSwL1KY

Re:Windows XP minimal-requirement experiments (2006) by jplayer01 on Sunday November 03, 2019 @05:45PM (#21437273)
That was a great video, thanks. He apparently also did a Win XP video, where he put together his dream PC https://www.youtube.com/watch?v=-XTnL4Mang0
Re:Windows XP minimal-requirement experiments (2006) by Splognosticus on Sunday November 03, 2019 @06:46PM (#21437613)
Ah yeah he's got a fair few of that kind of video--basically one from each major era of PCs all the way back to the original XT. His whole channel is great. He's so enthusiastic about all of this retro hardware and software. Even though I've seen most of them a few times at least it's still my go-to for relaxing YouTube binges.
Re:Windows XP minimal-requirement experiments (2006) by DrStalker on Sunday November 03, 2019 @10:00PM (#21438653)
If he can get DOS installed and CDROM drivers working he should be able to install at least windows 95a. Windows 95b preferred to use its own drivers (or drivers loaded from a floppy disk) for such things, but the early versions felt more like a GUI running on top of DOS.
Re:Windows XP minimal-requirement experiments (2006) by fuzzfactor on Monday November 04, 2019 @07:38AM (#21441037)
You will want this AMD K6 update regardless of your processor to bring W95b reliably up to 2.0GHz:

http://users.efni.com/~carsten/amd/readme.html

Re:Windows XP minimal-requirement experiments (2006) by nordsieck on Sunday November 03, 2019 @05:32PM (#21437194)
> So, out of curiosity, what’s the fastest PC that will still work on 95, 98, XP respectively?

One issue I ran into the hard way is that win 98 (and presumably 95) gets very unstable if you have more than 3/4 of a Gig of ram installed.

Re:Windows XP minimal-requirement experiments (2006) by orionblastar on Monday November 04, 2019 @12:54AM (#21439333)
I used to run Windows 95 and 98 in QEMU and DOSBOX. Quite snappy on my Intel i7 system.

There is also this option: https://www.windowslatest.com/2018/08/25/run-windows-95-on-w...

But it can crash on you.

Re:Windows XP minimal-requirement experiments (2006) by jaclaz on Monday November 04, 2019 @02:53AM (#21439680)
There are a number of limitations.

Here is a thread where surely compatible motherboards are listed (for XP):

https://msfn.org/board/topic/177563-newer-motherboards-that-...

The issue is mainly with drivers, though there are (unofficial) drivers for a few newish thingies (like NVME and USB 3.x) they do not work on all motherboards.

Here is one for 9x:

https://msfn.org/board/topic/97588-modern-motherboards-which...

Re:Windows XP minimal-requirement experiments (2006) by paulmd on Sunday November 03, 2019 @07:22PM (#21437816)
You can run Windows 95 on any current x86-64 PC. They are basically backwards compatible all the way to 8088. The problem is you will have no drivers for any OS that old.

https://www.youtube.com/watch?v=IO2BSLkQLDA

Re:Windows XP minimal-requirement experiments (2006) by jasomill on Sunday November 03, 2019 @11:31PM (#21439061)
While "any current x86-64 PC" is an exaggeration — UEFI-only systems, in particular, won't boot any version of DOS or Windows 9x — drivers may be less of a problem than you think:

- Even fairly recent systems with hybrid UEFI/BIOS still provide an IDE-compatible mode for onboard SATA controllers that should work with Windows 95.

- Windows 95 supports 16-bit MS-DOS drivers and BIOS disk access, so any storage controller with BIOS boot support and/or 16-bit MS-DOS drivers (disk, optical, ASPI) should work.

- Modern video cards still provide SVGA-compatible modes that should work.

- PS/2 keyboard and mouse ports should work.

- Serial and parallel ports should work.

- USB devices with legacy emulation provided by the system's BIOS (floppy, mass storage [hard drive, flash drive], keyboard, mouse, [optical?]) should work, assuming they're plugged in at boot.

Likely problems:

- non-emulated USB devices

- network adapters

- audio

- large amounts of RAM

For network and audio, your best bet would probably be to find a (still relatively recent) machine with pre-Express PCI slots for an older NIC and sound card (some not terribly old workstations and servers have these); while PCIe-to-PCI, and even PCIe-to-ISA, expansion boxes exist, the ones I've seen are both expensive (>$1,000) and hard to find on the used market.

Re:Windows XP minimal-requirement experiments (2006) by throwaheyy on Sunday November 03, 2019 @08:17PM (#21438136)
You likely wouldn’t find DIMMs small enough to boot it though. When I tried to prank my boss by replacing the HDD in his machine with one loaded with W95 it would not boot with even 512mb.
Re:Windows XP minimal-requirement experiments (2006) by paulmd on Monday November 04, 2019 @12:13PM (#21443786)
There are command-line options to limit the amount of memory Windows sees. See the video.
Re:Windows XP minimal-requirement experiments (2006) by gambiting on Monday November 04, 2019 @05:11AM (#21440269)
That's not true - Windows 95/98 will crash on startup if you have more than one CPU core present. You could make it work on Pentium D/CoreDuo/Core2Duo cpus by disabling the second core, but nowadays with modern CPUs there's no option to limit the CPU to a single core. Unless there is some workaround for it that I'm not aware of.
Re:Windows XP minimal-requirement experiments (2006) by vwuon on Monday November 04, 2019 @05:42AM (#21440419)
I've seen many BIOS that allow you to do that
Re:Windows XP minimal-requirement experiments (2006) by paulmd on Monday November 04, 2019 @12:12PM (#21443770)
I've never seen a BIOS not allow that. Often called "multi-processing" or something similar in BIOS.
Re:Windows XP minimal-requirement experiments (2006) by gambiting on Monday November 04, 2019 @12:17PM (#21443816)
I've haven't seen a bios that would allow disabling all cores except for one since at least intel 2xxx series - there is almost always a switch to disable hyperthreading, but a switch to disable all cores bar one?
Re:Windows XP minimal-requirement experiments (2006) by vwuon on Monday November 04, 2019 @01:21PM (#21444601)
From my own computer. Haswell CPU

https://i.imgur.com/5xPvoPA.jpg

Re:Windows XP minimal-requirement experiments (2006) by jplayer01 on Sunday November 03, 2019 @07:34PM (#21437891)
Which is the point, no? What good is a PC where nothing works? Cool video though.
Re:Windows XP minimal-requirement experiments (2006) by userbinator on Sunday November 03, 2019 @11:03PM (#21438944)
The standard PC peripherals will still work, and although you can only use one core, it's one core of a very fast CPU (relative to what was around when it was released and designed to run acceptably on), and gives you an idea how much "modern bloat" there is.
Re:Windows XP minimal-requirement experiments (2006) by jplayer01 on Monday November 04, 2019 @02:34AM (#21439618)
Well, ignoring the fact that WLAN/Ethernet won’t work without drivers (since internet is a bad idea with XP anyway), Sound and graphics don’t work either. So games are out, which is really the only reason I have for running XP. It’s too limited without working drivers and can’t be considered a working system.