News for hackers. Stuff that matters.
Re:Maker Faire halts operations and lays off all staff by airbreather on Saturday June 08, 2019 @05:31AM (#20131486)
Couple of points.

When I was a lad, making electronics meant you could listen to shortwave radio or talk to people around the world, when there was little other opportunity.

Plus, things like cars were still hackable with a few transistors and passive components, you could make a customised indicator timer, or turbo timer or what ever, and it was probably way cheaper if you knew what you were doing.

Fast forward, very little you can now make is cheaper, or creates a functionality not otherwise available retail/off the shelf.

Now for me, it was great - my dad was a radio amateur, I grew up with the those things, he lectured at uni and I had access to PDP-8 and 11 when no one had a computer at home and most people interacted with punch cards.

I spent literally years of my younger life tinkering and discovered/learned by direct exploration and experimentation all sorts of things eg the rectification of copper oxide, Q factor and how to get it and use it, all the things you can use as earthing and antennas in radio systems (some pretty strange things in there), I wrote and sold Atari 400 games when I was 13 on, learning things like how to write a floating point library in a 6502 in minimal space, create physics engines for games, just to name a few, the list goes on.

Now I have worked as an electrical engineer designing and building large and small industrial power and control systems for over 30 years.

Most days I draw down on some former hobby or tinkering experience in some way in my work.

Not sure the maker movement we have seen recently will create the same trajectory for too may others, maybe I am wrong, but a lot of what I did was because there were no equivalent consumer goods and the best info available was at the local library or maybe the odd magazine if you were lucky.

Re:Maker Faire halts operations and lays off all staff by gumby on Saturday June 08, 2019 @08:29AM (#20132033)
> Plus, things like cars were still hackable with a few transistors and passive components, you could make a customised indicator timer, or turbo timer or what ever, and it was probably way cheaper if you knew what you were doing.

I nodded when I read this, thinking, "Yeah, and what's the modern equivalent?" Everything seems so high level and complex, like CANBUS in the case of car, USB for PCs and of course so much is locked down.

Then I realised that kids could get a start sticking an LED on a GPIO pin from an Arduino. I believe a PI is basically a PC, but perhaps it could have a few such pins as well, if it doesn't already. PCs used to have parallel ports which served a similar function.

Then from blinking a LED they could incrementally add a few more circuits: 7 segment display, some counters, who knows. Even some analog stuff (to hell with harmonics) are possible -- and controllable from your laptop or phone over network.

Perhaps Evel Mad Scientists or Adafruit has a few things in this direction?

Re:Maker Faire halts operations and lays off all staff by 52-6F-62 on Saturday June 08, 2019 @10:47AM (#20132655)
Electric guitars and tube amplifiers might be. But there is a decently high risk in playing with the grounding on those things.

I’ve had my share of grounding faults while plugged into the wall or on stage (and that was just with the factory wiring on a 70’s Traynor YGM4). ...ouch

But guitars are simple enough. You can replace components to add new features or change tone and volume responsiveness and even add certain wiring/component patterns to allow you some gain in the internal guitar circuits.

Old effects pedals as well. There’s a ton of modding or BYO instructions out there.

All the analog, point-to-point stuff is easily-enough hackable anyway.

I mean if we’re drawing an equivalent to a car... the relative starting costs might be high, depending.

Re:Maker Faire halts operations and lays off all staff by tnecniv on Saturday June 08, 2019 @08:03PM (#20136052)
Don't mess with tube amps. If you touch the wrong capacitor without knowing what you're doing you could really injure yourself.

That said, there's plenty of safe audio equipment out there to experiment with. Before I got an EE degree, I was building effects pedals in my basement.

Regarding effects pedals specifically, you won't end up saving much money versus buying one off the shelf due to economies of scale, but you can make something really fun and unique by yourself pretty easily.

Re:Maker Faire halts operations and lays off all staff by 52-6F-62 on Sunday June 09, 2019 @01:01AM (#20137220)
Definitely agree! Tube or solid state alike. Both can house some dangerously-sized caps.

Guitars are also quite safe and relatively forgiving as you keep the grounding intact.

That said I only mentioned amplifiers as the GP was referring to hacking on cars—so I imagine the project wasn’t targeted at complete beginners when they were wondering about equivalent projects. And draining caps before working on them is one of the first things any tinkerer learns—or learns to stay away from.

Re:Maker Faire halts operations and lays off all staff by wrs on Saturday June 08, 2019 @08:41AM (#20132087)
No worries. PIs do have GPIO pins, and lots of peripherals to plug into them. Nearly Adafruit’s whole product line is about hooking up random peripherals to I/O pins.

And speaking of custom household devices, I’m about to spend $30 or so at Adafruit to build a thing that texts my wife when her outdoor herb pots need watering. :)

Re:Maker Faire halts operations and lays off all staff by cmpb on Saturday June 08, 2019 @10:16AM (#20132502)
That sounds fun! I've been rebuilding my wife's gardens and adding drip lines / irrigation. I ended up getting an OpenSprinkerPi[1] board to control the irrigation valves I'm installing. There's also a software project[2] that gives it a little more configurability/utility, including tying it into automatic watering based on the weather and such. I'm just having a lot of fun with it, and it seems like you are too!

[1]https://rayshobby.net/wordpress/ospi/ [2]https://github.com/rszimm/sprinklers_pi

Re:Maker Faire halts operations and lays off all staff by gsich on Saturday June 08, 2019 @10:21AM (#20132526)
Pay more for the humidity sensor. Not the resistive ones, they fail after a short time.
Re:Maker Faire halts operations and lays off all staff by HeyLaughingBoy on Saturday June 08, 2019 @11:43AM (#20132973)
I'll go a step further. Don't pay for any sensor, you can make your own resistive sensor from a couple of resistors. The reason they fail is oxidation on one terminal. If you alternate the polarity as you read the sensor, it avoids that problem.
Re:Maker Faire halts operations and lays off all staff by wrs on Saturday June 08, 2019 @10:18PM (#20136612)
Adafruit has a cheap capacitive sensor (using a micro controller with built in touch sensor circuitry) — but not that cheap. The polarity flip is a clever idea. Well, part of the fun is wildly over-engineering the thing, right?
Re:Maker Faire halts operations and lays off all staff by jamiek88 on Saturday June 08, 2019 @03:39PM (#20134618)
Do you have any guide to this you’ve seen or can recommend?
Re:Maker Faire halts operations and lays off all staff by HeyLaughingBoy on Saturday June 08, 2019 @07:48PM (#20135967)
Nope. I just did it once. I'll look around and see if I drew up a schematic.
Re:Maker Faire halts operations and lays off all staff by gsich on Sunday June 09, 2019 @09:01PM (#20143008)
Yes, but lifetime is still not the best.
Re:Maker Faire halts operations and lays off all staff by diyseguy on Saturday June 08, 2019 @11:08AM (#20132763)
Once everything went to surface-mount parts, I lost interest because it all became too difficult to hack.
Re:Maker Faire halts operations and lays off all staff by xigency on Saturday June 08, 2019 @09:43PM (#20136455)
By the way, there are multiple Arduino CAN-BUS shields out there, ranging from $15-$25.

https://robotdyn.com/can-bus-shield-for-arduino.html https://www.sparkfun.com/products/13262

Re:Maker Faire halts operations and lays off all staff by WalterBright on Saturday June 08, 2019 @05:46AM (#20131551)
When I was a boy I'd stop by the local TV repair shop and they'd give me old TVs. I had a lot of fun with them, like randomly swapping the tubes around and seeing what would happen. My mom was sure I was going to electrocute myself.

You're lucky your dad could mentor you with that stuff. I didn't know anybody who knew anything about electronics, so I just floundered around with it. That all changed when I got to college, where there was electronics expertise everywhere and I was finally able to build things that worked.

For example, someone finally showed me how to solder properly. What a difference a couple minutes of help makes!

Re:Maker Faire halts operations and lays off all staff by airbreather on Saturday June 08, 2019 @05:52AM (#20131580)
Strangely enough I got almost no mentoring, he was like, the stuff is all there if you want to use it, I got taken to the uni labs on weekends and the family went to the library once a week religiously.

He was both a lecturer of maths and computing, but also taught teachers how to teach. His attitude was that if you were really interested you needed to do it yourself and learn through successes and failures and build up all the concepts in your own mind - it was the concepts, not the facts that made all the difference going forwards.

Now this is so much more true than ever, because facts and calculations are available as a "service" effectively on the internet.

Abstracting the concepts and synthesizing new ones through extension, application of lightly related techniques/ materials/methods, cross pollination, etc in your mind is the truly irreplaceable skill that leads to disruption and innovation.

Re:Maker Faire halts operations and lays off all staff by WalterBright on Saturday June 08, 2019 @06:03AM (#20131617)
I did better with cars, for the simple reason that when I took them apart, I could see how everything worked. With electronics, you need an oscilloscope to see the magic. All I had was a VOM.

Ironically, there were lots of kids taking cars apart in high school, so I could help and get help. But in college, nobody, and I mean nobody, was interested in cars. It's still hard to find anyone who is, hardly anyone has a modified car. My (medium modified) dodge wouldn't merit a glance in my high school daze, but today people go ape when I drive by in it.

Re:Maker Faire halts operations and lays off all staff by antisemiotic on Saturday June 08, 2019 @08:16AM (#20131979)
>With electronics, you need an oscilloscope to see the magic. All I had was a VOM.

The price of test equipment is one of the reasons I went into software despite having an EEng degree. Tinkering with a computer is way cheaper, and I sort of gravitated towards stuff that had software in it, then ended up realizing that I don't really care about electronics all that much. The degree served well for getting a job in writing firmware, I guess.

Re:Maker Faire halts operations and lays off all staff by weinzierl on Saturday June 08, 2019 @08:21AM (#20131993)
Where I live, on one day in the year, people could put their bulky junk in front of their houses for it to be collected[1]. Lots and lots of radios and TVs. For my friends and me it was the yearly electronics component delivery;-). At that time the devices often had a pouch inside that contained the schematics. I learned a ton from that.

I also enjoyed the stories from Feynman how he tinkered around with radios bought at rummage sales. I think they are in "Surely You're Joking, Mr. Feynman!" but there is also a recording where he recounts those times in person[2].

[1] https://germany-for-foreigners.blogspot.com/2012/02/sperrmul...

[2] https://www.youtube.com/watch?v=nmEoL5C7ths

Re:Maker Faire halts operations and lays off all staff by toomuchequate on Saturday June 08, 2019 @08:34AM (#20132058)
>You're lucky your dad could mentor you with that stuff.

Looking back on my childhood vs today.

I was underutilized. My parents didnt know past geometry.

At the same time, very thankful my dad got me a computer as a kid. Wish we did more than install video games. But hey, computers broke more back then and I learned how to fix OS or hardware problems.

Re:Maker Faire halts operations and lays off all staff by sbov on Saturday June 08, 2019 @12:03PM (#20133097)
My 8th grade science teacher taught us how to solder. And how to count in binary using our fingers. He was pretty awesome in a lot of ways.
Re:Maker Faire halts operations and lays off all staff by camillomiller on Saturday June 08, 2019 @05:44AM (#20131543)
I think that the gap today between what you can do with an electronics kit and the convenience of something you can get cheaper off the shelves to build something more complex is way wider than it's ever been. Also, you can build way more cool and complex stuff learning software and coding, and using it to put together complex hardware models (such in robotics). The "roots" of electronics are a good way to entertain kids, but electronics amateurs, except for some niches such as electric instruments enthusiasts, are really too small of a niche for an operation like Make Media to be sustainable. Also, the Makers Revolution was probably a fad (not in general, but in the way it was self-depicting in the media).
Re:Maker Faire halts operations and lays off all staff by Theodores on Saturday June 08, 2019 @07:52AM (#20131900)
> Also, the Makers Revolution was probably a fad (not in general, but in the way it was self-depicting in the media).

Fads are useful though. The original way of doing electronics with a breadboard and some 74 series ICs was a fad. CB radio was a fad. The hobby computer market was a fad. The home games console business was a fad. The 8 bit home computer revolution was more of a craze than a fad, but still arguably a fad.

Fads are often driven by the genius of one or two individuals, the author R A Penfold wrote most of the 74 series breadboarding books, Tandy/Radio Shack did their bit in providing bits to people keen to get in on the hobby.

Maybe the maker movement was a bit like that. Take away the Raspberry Pi and the 3-D printer and there isn't so much making going on.

So the question becomes what happens next, what is the next fad?

Someone has probably worked it out in a garage somewhere and the media will cotton on to it in a couple of years time.

A key part of these fads is that it is somehow educational. Not sure anything useful came from people tinkering with any of the stuff involved in these 'fads' but then we wouldn't be where we are without them. This in part depends on when people get on board. If you are the only kid in town in at the start then you learn useful stuff, when it becomes a fad the other kids get pushed into something they can't be that bothered with, the cool stuff has already been done and it becomes commoditised ready made 'meh'.

There was a time when the fad was marquetry. The maker scene of the time had people making beautiful sideboards out of wood with beautifully inlaid veneer. All kinds of wonderful things made of wood. The enabling tools were lathes and there were magazines pushing people to make new and exciting things, nobody needed a beautiful case to show off their Airfix plane collection but people would make such a thing if prodded along. In a way the maker scene is like that with updated materials.

Re:Maker Faire halts operations and lays off all staff by TheOtherHobbes on Saturday June 08, 2019 @09:56AM (#20132387)
The original way of doing electronics was tag board, hand-soldered components, and valves. Hobbyist radio was a huge thing in the 30s/40s/50s and consumer electronics and computing have their roots in that.

The problem with the Maker movement is that it was never going to provide the same rewards. The appeal of hobby electronics in the 70s/80s was DIYing expensive consumer items for low cost.

In some cases you could DIY expensive professional items. Everyone knew computers were rare and expensive, but you could build one. In your own home. For a not completely ridiculous price. And all the while you were learning what the elements did, and some of how they worked. Thrilling! For adults as well as teens and kids.

There was an aspirational element, a practical element, and - for some people - some interest in the mysteries behind the designs.

The nearest modern equivalent is probably app development, but that's already so rarefied it's not really a DIY scene.

Aduino/Pi are not consumer-friendly. You can build projects, but not replacement products - especially not products that have a modern ecosystem around them.

Tinkering for its own sake still has some appeal, but it's not driven by the same passionate curiosity that drove earlier fads.

Re:Maker Faire halts operations and lays off all staff by Theodores on Saturday June 08, 2019 @11:41AM (#20132958)
> The original way of doing electronics was tag board, hand-soldered components, and valves.

And there was me just pushing a 555 timer into some breadboard. I imagine that some thought this was cheating.

I am broadly in agreement with you, however, I would like to hold back on my judgement to view this tinkering as useless, a waste of time. I used to work with a guy who had no idea about programming but that did not hold him back from having a great time with a Raspberry Pi. With next to no knowledge he was delving in deep into things I would struggle with, despite however many years of UNIX/Linux. Sometimes enthusiasm is wonderful.

Recently I took an interest in how the original arcade machines were programmed. At the time that arcades were a thing I did not see the art that was in the development of these games. The music in Marble Madness is a work of genius but at that time music was about things like a drummer being able to keep in time, not programming a synthesiser chip. Consequently I was not seeing what was really going on in these arcade machines and more wary of being fleeced in dingy arcades, with that feeling of guilt that goes with wasting time. Because I now have a different view of the arcade with this hindsight I am wary of dismissing the fads of today. I like to be a bit more open minded or naive.

During those years when the arcade beckoned I spent my time in a workshop of a different kind - a regular bicycle shop, doing evenings, school holidays and Saturdays. We were always in need of staff but I never had anyone from my school friends to recommend. This was a pity. Every working day I was loving it and getting better and better at doing things with spanners, the vice, everything really. I was not a big user of power tools but if you are holding things for the guy holding the oxy-acetylene torch you are still learning.

I wish there were more opportunities for this learning by doing and getting paid for it. It is a win-win-win. But for some reason - the same reason I could not recruit my school buddies into the bike workshop - we are not having enough of that going on. I feel the maker scene is useful for that, even if people cannot make replacement products they are at least learning tools that make them employable. Even if those tools are not needed in the job there is so much confidence and enthusiasm gained.

If I think back to my former workmate doing things with a Raspberry Pi, the initiative he showed made him employable in tech. He was doing pictures for the website (products) the slow Photoshop way rather than the ImageMagick automated way. Most artworkers are not suited to being taught how to automate their work, you just wouldn't bother to even try. I had a vested interest in him doing stuff the automated way and because I had got to know him through this Raspberry Pi nonsense I was able to explore the possibilities. His knowledge of shell scripting made a whole lot of stuff possible, making my job easier and giving him more day job time for Raspberry Pi tinkering. Luckily he wasn't overly micro managed.

Re:Maker Faire halts operations and lays off all staff by minikites on Saturday June 08, 2019 @10:06AM (#20132434)
A lot of current "maker culture" is repackaged consumerism: buying costly kits containing pennies worth of electronics based on brand names and fashion. It's not about reducing waste, it's about creating more (unlike the examples you mentioned).
Re:Maker Faire halts operations and lays off all staff by vr46 on Saturday June 08, 2019 @02:36PM (#20134183)
Certainly locally (in London), the people at our MakerLab are heavily focused on repair, reuse and repurpose which is a reaction to the modern world in much the same way that things were when you were a lad.
Re:Maker Faire halts operations and lays off all staff by HeyLaughingBoy on Saturday June 08, 2019 @11:31AM (#20132899)
Me too. I started with my first crystal radio at age 11 with a germanium rectifier purchased from an electronics store and a phone headset donated from the landlord who worked at the telephone company and wanted to support my hobby.

Moved on to Shortwave Listening, QSL cards and at age 15 got my Technician license at the FCC office on Varick St in lower Manhattan because I didn't know any other hams who could administer the Novice license. I think Adafruit is now around the corner from where that office used to be?

I built tons of stuff from salvaged components, did lots of experiments that didn't pan out, accidentally discovered that the inductive spike from a big solenoid powered by a 9V battery is enough to shock! I went on to get degrees in EE and SE.

I firmly believe that right now it's easier than it ever was to get into the hobby. All those old parts are still available and tons of exciting ones are now easy to purchase, with tons of documentation. No more desoldering unknown transistors and playing around with resistors to get the bias right.

I think we all have our motivations for getting started and continuing. There won't be any shortage of curious kids getting involved and building weird stuff. Just take a look at the Arduino forums online, electronics as a hobby is exploding, it's just that people are getting started in a different way.

Re:Maker Faire halts operations and lays off all staff by jaabe on Saturday June 08, 2019 @11:34AM (#20132919)
I think there is a lot of tinkering available still. Raspberry pis and IOT are areas where you can really go nuts.

I do hope we’ll see hardware open up again, and maybe we will with the increasing focus on sustainability.

Re:Maker Faire halts operations and lays off all staff by jwr on Saturday June 08, 2019 @01:39PM (#20133796)
You can still build interesting devices that are not available off-the-shelf. It's just that these days most of the value (and complexity) lies in the software, not the hardware, and people are both not capable of writing complex software and do not enjoy doing it.

As an example, take a Nordic nRF52832 in a module, connect some sensors or LEDs to it, and you have a pretty neat device that you could access with your phone. But programming it to do something is an entirely different story.

Re:Maker Faire halts operations and lays off all staff by JVIDEL on Sunday June 09, 2019 @03:03PM (#20141144)
Not the same generation (waaay later) but I too had a PC at home back in the DOS days when computers were not that common. I learned to use the command line before I learned to read and write in my native language.

Anyway, I went through a similar thinkering scene but it was in software, the FOSS scene of the late nineties up to early this decade was very active and there were tons of tools and programs that surpassed retail software of the time.

As for electronics right now, there's some crazy things in the FOSH scene and if I had the money I would get more into that, but when it comes to retail electronic and IoT stuff I'm skeptic: too many corners cut, too many security holes, too much data going into opaque servers, etc. And that's just security and privacy, don't get me started on planed obsolescence and repairability.

And there's still a lot of stuff you can make that have no retail equivalent, from console clones with FPGAs for perfect emulation to car automation with comma.ai

Re:Maker Faire halts operations and lays off all staff by m463 on Saturday June 08, 2019 @11:26PM (#20136906)
> Fast forward, very little you can now make is cheaper, or creates a functionality not otherwise available retail/off the shelf.

I think this is a matter of perspective. The components you string together are now scaled up, as are the experiences of younger folks.

I think of some friends who were saying "people just can't become a private pilot nowadays", but later I wondered if maybe there are new opportunities they don't recognize (like powered paragliding).

Re:Maker Faire halts operations and lays off all staff by tmaly on Saturday June 08, 2019 @09:20AM (#20132238)
I started out a bit later taking apart the Atari and getting circuit kits from Radio Shack.

It was a lot of fun. I did a good number of electrical engineering courses as part of my computer engineering degree. Now with kids, I plan on doing small projects to pique their curiosity

Re:Maker Faire halts operations and lays off all staff by Tempest1981 on Saturday June 08, 2019 @11:51AM (#20133018)
I also remember Heathkit -- although I can't remember which came first, Radio Shack or them.

Edit: wow, both were founded in the 1920s

Re:Maker Faire halts operations and lays off all staff by tmaly on Sunday June 09, 2019 @11:28AM (#20139807)
I was really bummed out when Radio Shack went bankrupt.

I kept my intro to electronics book I had as a kid. Pages are all yellow, but the activities are still amazing. I will start some of these with my daughter this summer.