Re:Maker Faire halts operations and lays off all staff
by cmpb on Saturday June 08, 2019 @10:16AM
(#20132502)
That sounds fun! I've been rebuilding my wife's gardens and adding drip lines / irrigation. I ended up getting an OpenSprinkerPi[1] board to control the irrigation valves I'm installing. There's also a software project[2] that gives it a little more configurability/utility, including tying it into automatic watering based on the weather and such. I'm just having a lot of fun with it, and it seems like you are too!
[1]https://rayshobby.net/wordpress/ospi/ [2]https://github.com/rszimm/sprinklers_pi
Re:Maker Faire halts operations and lays off all staff
by gsich on Saturday June 08, 2019 @10:21AM
(#20132526)
Pay more for the humidity sensor. Not the resistive ones, they fail after a short time.
Re:Maker Faire halts operations and lays off all staff
by HeyLaughingBoy on Saturday June 08, 2019 @11:43AM
(#20132973)
I'll go a step further. Don't pay for any sensor, you can make your own resistive sensor from a couple of resistors. The reason they fail is oxidation on one terminal. If you alternate the polarity as you read the sensor, it avoids that problem.
Re:Maker Faire halts operations and lays off all staff
by wrs on Saturday June 08, 2019 @10:18PM
(#20136612)
Adafruit has a cheap capacitive sensor (using a micro controller with built in touch sensor circuitry) — but not that cheap. The polarity flip is a clever idea. Well, part of the fun is wildly over-engineering the thing, right?
Re:Maker Faire halts operations and lays off all staff
by jamiek88 on Saturday June 08, 2019 @03:39PM
(#20134618)
Do you have any guide to this you’ve seen or can recommend?
Re:Maker Faire halts operations and lays off all staff
by HeyLaughingBoy on Saturday June 08, 2019 @07:48PM
(#20135967)
Nope. I just did it once.
I'll look around and see if I drew up a schematic.
And speaking of custom household devices, I’m about to spend $30 or so at Adafruit to build a thing that texts my wife when her outdoor herb pots need watering. :)