Re:Samsung announces first 3nm PDK
by dfrage on Wednesday May 22, 2019 @02:55PM
(#19984287)
I remember reading that Intel was having TSMC run off the lowest end Altera FPGAs because Intel's fabs were just too expensive.
Other possibilities off the top of my head might be Cadence being able to do stuff that's now required for these smaller and using EUV lithography nodes, and/or a backup in case their "10nm" never makes it, and their "7nm" having problems or also failing. Embarrassment should be preferable to the worst case alternatives, and we have no reason to believe Intel will be able to regain its ability to move to smaller nodes.
Re:Samsung announces first 3nm PDK
by GuB-42 on Wednesday May 22, 2019 @12:26PM
(#19982818)
It is indeed pretty wild but the "3 nm" name is not an actual distance, it is a marketing term supposed to represent the transistor density. The actual transistors are much larger than that.
For example Intel's 10nm is equivalent Samsung's 7nm. They both have a pitch of around 40nm.
Re:Samsung announces first 3nm PDK
by EvgeniyZh on Thursday May 23, 2019 @05:05AM
(#19989844)
Any comparison for transistor density (and power consumption) of different manufactures/generations? Though probably they are hiding this as hard as possible, throwing only marketing nonsense on consumers.
Re:Samsung announces first 3nm PDK
by sp332 on Wednesday May 22, 2019 @11:52AM
(#19982483)
At this point I don't think they physically measure anything on the chip to get that number. It's just an indication of how tightly you can space the transistors, plus a bit of marketing hype. The pics in the article make me wonder if the new gate design is even wider than before, but allows for stacking up transistors which ends up increasing the density to the equivalent of 3nm.
Re:Samsung announces first 3nm PDK
by permatech on Wednesday May 22, 2019 @02:29PM
(#19984029)
> At this point I don't think they physically measure anything on the chip to get that number.
They are measuring the smallest feature size - the smallest shape that is reliably replicated across the wafer. Actually pretty impressive when you think about the lithography behind it.
Re:Samsung announces first 3nm PDK
by IanCutress on Wednesday May 22, 2019 @06:19PM
(#19986163)
Not in this case. It's mostly just a marketing term. If I wanted to be pedantic, Intel's first gen 10nm has a tip fin width of 7nm. 14nm had a tip fin width of 8nm.
Re:Samsung announces first 3nm PDK
by creatornator on Wednesday May 22, 2019 @11:22AM
(#19982175)
Going much smaller than we have right now, and you run up against some exotic issues--if you decrease the dielectric thickness, you run the risk of break down between the gate and source/drain under normal operating conditions. Your steady current rating also drops dramatically if the other feature sizes are decreased. I would probably say a 3 atom MOSFET is not possible, since at that scale you can't really have an effective dielectric between the atoms, and the conductors connected to the "single-atom terminals" will have a bulk effect on the behavior.
Re:Samsung announces first 3nm PDK
by agumonkey on Wednesday May 22, 2019 @03:29PM
(#19984605)
A semiconductor is made of multiple surfaces/areas. Their lithographic process allows to have some at 3nm in size, but a transistor can be a sum of many parts.
Re:Samsung announces first 3nm PDK
by donnietb on Wednesday May 22, 2019 @08:07AM
(#19980231)
Can someone elaborate on how this translates to the actual performance of GPU. What is the performance jump (will this allow to run 4k x 4k per eye VR headset) when compared to current GPU generation ?
Today Even with Nvidia 1080 cards running 2k x 2k per eye headsets is not an easy task and beyond a smooth VR experience.
Re:Samsung announces first 3nm PDK
by sambe on Wednesday May 22, 2019 @08:09AM
(#19980246)
It's right there in the article: 1.35x. That sounds like raw speed though, with actual changes probably depending more on what people do with the new technology.
Re:Samsung announces first 3nm PDK
by sambe on Wednesday May 22, 2019 @10:49AM
(#19981769)
" The headline PPA values that Samsung is announcing are also impressive: compared to 7nm, 3GAE will offer 1.35x performance, 0.5x power, with a 0.65x die area."
...
Samsung states that these performance numbers are based on using larger width cells for critical paths where frequency is important, and smaller width cells for non-critical paths where power savings are crucial. Technically Fmax of the widest cells is listed as 1.5x, while power at Fmax is 0.6x. Power at iso-performance is where the 0.5x number comes from."
I don't think 35% at fixed frequency makes sense; 35% is the frequency boost (with power savings too).
Re:Samsung announces first 3nm PDK
by ricardobeat on Wednesday May 22, 2019 @01:19PM
(#19983267)
Nearly every existing VR game runs perfectly smooth with a 2080. You won’t get 90fps 4K even with a Ti card, but for FHD we’re well served, price aside.
Re:Samsung announces first 3nm PDK
by ksec on Wednesday May 22, 2019 @08:47AM
(#19980539)
GPU scales really well with transistor count and You can expect about double the performance with best of 7nm, and likely another double for 3nm. So you are looking at 4x the performance.
Of course this does not take into account about TDP, Clockspeed, Memory Speed, Cost of Die Size etc. What is technologically possible may not be economically possible. We are going to need much faster memory, GDDR7? or HBM3, how much would those cost?
And a 3nm ( Whether that is from Samsung or TSMC ) Nvidia GPU will likely be 2022 or 2023 at the earliest.
Re:Samsung announces first 3nm PDK
by imtringued on Thursday May 23, 2019 @06:59AM
(#19990509)
More transistors require more energy. GPUs are already at 300W. Doubling the number of transistors means double the power consumption which means 600W. Smaller transistors are more energy efficient but they can't reduce the energy needed per doubling by 50%. Therefore you end up with a 400W GPU. That's still too high. Energy efficiency is now far more important than raw transistor count.
Re:Samsung announces first 3nm PDK
by ksec on Wednesday May 22, 2019 @09:51AM
(#19981137)
Edited a bit, Nvidia has always been late ( or waiting for it to mature ) to leading node. So in reality we are looking at 2024 / 2025 for mainstream part.
Re:Samsung announces first 3nm PDK
by syntaxing on Wednesday May 22, 2019 @09:14AM
(#19980796)
I'm super curious in the semi technology to create 3 nm layers or beyond. There's not many processes to choose from to begin with thats scalable with adequate uniformity. Do they use some sort of MBE process?!
Re:Samsung announces first 3nm PDK
by baybal2 on Wednesday May 22, 2019 @09:27AM
(#19980919)
Rumours heard by me were of apple's tapeout on 7nm being tragically low yield in between 30 to 40% (throwing away half of the wafer,) but also that TSMC eventually got 7nm yields into sane values.
New processes almost always have a yield drop, followed up by recovery, but anything below 50% is really unprecedented.
Apple 12 is not that of a huge chip. It is big for a mobile SoC, but smaller than say a mainstream gaming grade GPU.
I greatly doubt the use of MBE, most likely some regular kind of epitaxy + a lot of process control and swearing to get it right. MBE would've increased cycle times way too much (need for ultra deep vacuum and 0 impurities)
Re:Samsung announces first 3nm PDK
by ItsTotallyOn on Wednesday May 22, 2019 @08:23AM
(#19980360)
The information in the article is incorrect. The PDK gives more performance OR more power, but not both. Other reporters have this correct, while this article is incorrect.
I was completely dazzled thinking "what to they get from that?" until it hit me that only Cadence has 7nm TSMC and Samsung workflow ready.
This made me thinking, is Intel finally thinking about doing 7nm tapeouts at TSMC or Samsung?
Other possibilities off the top of my head might be Cadence being able to do stuff that's now required for these smaller and using EUV lithography nodes, and/or a backup in case their "10nm" never makes it, and their "7nm" having problems or also failing. Embarrassment should be preferable to the worst case alternatives, and we have no reason to believe Intel will be able to regain its ability to move to smaller nodes.
I think you're not right, unless I am missing something.
https://news.synopsys.com/2018-04-30-TSMC-Certifies-Synopsys...
https://news.synopsys.com/2018-06-22-Synopsys-Custom-Design-...
To my knowledge, they are the only one who have just anything workable for EUV based processes.
For example Intel's 10nm is equivalent Samsung's 7nm. They both have a pitch of around 40nm.
They are measuring the smallest feature size - the smallest shape that is reliably replicated across the wafer. Actually pretty impressive when you think about the lithography behind it.
https://www.anandtech.com/show/13405/intel-10nm-cannon-lake-...
This is why people are moving away from planar transistors to "FinFets" and eventually having an "all around gate"
Today Even with Nvidia 1080 cards running 2k x 2k per eye headsets is not an easy task and beyond a smooth VR experience.
Current Nvidia is 12 nm I believe, so the question si what is the possible pixel count bump.
I don't think 35% at fixed frequency makes sense; 35% is the frequency boost (with power savings too).
Of course this does not take into account about TDP, Clockspeed, Memory Speed, Cost of Die Size etc. What is technologically possible may not be economically possible. We are going to need much faster memory, GDDR7? or HBM3, how much would those cost?
And a 3nm ( Whether that is from Samsung or TSMC ) Nvidia GPU will likely be 2022 or 2023 at the earliest.
That seems really optimistic to me.
New processes almost always have a yield drop, followed up by recovery, but anything below 50% is really unprecedented.
Apple 12 is not that of a huge chip. It is big for a mobile SoC, but smaller than say a mainstream gaming grade GPU.
I greatly doubt the use of MBE, most likely some regular kind of epitaxy + a lot of process control and swearing to get it right. MBE would've increased cycle times way too much (need for ultra deep vacuum and 0 impurities)
Fmax +50% Power @ Fmax -40% Power @ isoperf -50%
Different parts of Samsung aren't talking to each other.