News for hackers. Stuff that matters.
Re:Ask HN: What technologies did you learn in 2018? by dsiegel2275 on Sunday December 23, 2018 @08:32AM (#18745967)
Machine Learning.

In 2018 I went from "zero to sixty", so to speak. At the beginning of the year I knew nothing about ML, and my math skills had gotten so rusty I couldn't even remember how to do simple derivatives or multiply two matrices.

In the first half of 2018 I relearned the college math that I had forgotten by working through MIT OCW's Linear Algebra, Calculus, and Probability courses.

In the Fall, I enrolled in Carnegie Mellon's 10-601 course, graduate "Introduction to Machine Learning". It was hard, it was a ton of work, but I did well and it was completely worth it as I now have a solid understanding of the basics of the field and can continue studying this upcoming year and into the future.

Re:Ask HN: What technologies did you learn in 2018? by itprofessional4 on Sunday December 23, 2018 @05:10PM (#18748675)
One course I found very helpful was 6.034 by Prof. Patrick Henry Winston[0] . Worth the time.

[0] https://ocw.mit.edu/courses/electrical-engineering-and-compu...

Re:Ask HN: What technologies did you learn in 2018? by p2detar on Sunday December 23, 2018 @09:10AM (#18746141)
Thanks a lot for the MIT OCW lectures hint! I want to do the same in 2019. What works for me in general is diving into a side project and learning by hacking, but I fear ML won't be susceptible to this approach.
Re:Ask HN: What technologies did you learn in 2018? by pvarangot on Sunday December 23, 2018 @08:11PM (#18749574)
The Linear Algebra OCW is great if you do all the exercise and read the book as you study. For Calculus it's not so great, though the ODE course is fine.

This kind of courses from UPenn are really good if you need to refresh single variable, though I did an older version were all the courses were given together than I can't find in the current Coursera: https://www.coursera.org/learn/single-variable-calculus

Re:Ask HN: What technologies did you learn in 2018? by anotheryou on Sunday December 23, 2018 @09:56AM (#18746377)
fast.ai looks promising for just that
Re:Ask HN: What technologies did you learn in 2018? by p2detar on Sunday December 23, 2018 @03:21PM (#18748108)
Looks pretty cool! Thank you.
Re:Ask HN: What technologies did you learn in 2018? by anotheryou on Sunday December 23, 2018 @03:25PM (#18748122)
I just started it too :)
Re:Ask HN: What technologies did you learn in 2018? by Drdrdrq on Sunday December 23, 2018 @04:54PM (#18748581)
I also learn by doing, and it works with ML too (dived into it last year, though I'm currently not doing it anymore). Find a project and jump... Happy learning!
Re:Ask HN: What technologies did you learn in 2018? by mrfusion on Sunday December 23, 2018 @10:19AM (#18746520)
Where did you get that kind of motivation? Sounds almost super natural.
Re:Ask HN: What technologies did you learn in 2018? by dsiegel2275 on Sunday December 23, 2018 @03:46PM (#18748212)
It isn't supernatural, trust me. Very simply: I set a goal, understood what prerequisites I needed to fill, and just worked hard to get there. I put in about 5 - 10 hours a week in the first half of the year working through the OCW courses, then probably 10-15 hours a week during the CMU class. I work fulltime as a software engineer, so my 'class' time was usually a couple hours a night, after the wife and kids go to bed.
Re:Ask HN: What technologies did you learn in 2018? by bruhbruhbruh on Monday December 24, 2018 @08:27PM (#18755307)
I struggle to focus after a full day of work and other tasks. I especially struggle to focus on technical work, and learning new things is difficult. How do you have the energy to sit down for another few hours of technical work after a full day of work?
Re:Ask HN: What technologies did you learn in 2018? by dsiegel2275 on Tuesday December 25, 2018 @12:00AM (#18756000)
I'm not gonna lie, putting in those couple hours can just be plain tough. Some days it is the absolute last thing that I want to be doing at 9 o'clock in the evening.

But I motivate myself by focusing on the long-term impact for my career, and thus the benefits for myself and my family:

Coupling my expertise in software engineering with deep knowledge in an adjacent field such as ML I believe can open up new opportunities and give me the freedom to take my career along paths that weren't possible before. That is what I remind myself when I sit down to work homework problems late in the evening.

Re:Ask HN: What technologies did you learn in 2018? by masteruvpuppetz on Sunday December 23, 2018 @12:12PM (#18747126)
That's amazing :) What do you plan on using ML knowledge? Like does having this skill have a market (for non-PhDs)?
Re:Ask HN: What technologies did you learn in 2018? by petrbela on Sunday December 23, 2018 @01:13PM (#18747435)
Applied ML is one of the hottest CS jobs these days :-) From startups to big cos, everyone's looking for data scientists.
Re:Ask HN: What technologies did you learn in 2018? by wholien on Sunday December 23, 2018 @05:53PM (#18748934)
When you say you enrolled in 10-601, what did you do? I assume you aren't actually a student at CMU.
Re:Ask HN: What technologies did you learn in 2018? by dsiegel2275 on Sunday December 23, 2018 @06:14PM (#18749050)
I'm a staff member at CMU, and so have the benefit of being able to enroll in classes for free.
Re:Ask HN: What technologies did you learn in 2018? by PascLeRasc on Sunday December 23, 2018 @09:15PM (#18749825)
I'm also a CMU staff member and I audited 10-601 this past semester but had to stop halfway through because it was too over my head, props to you for doing well in it!
Re:Ask HN: What technologies did you learn in 2018? by lucb1e on Sunday December 23, 2018 @01:34PM (#18747555)
> so rusty I couldn't even remember how to do simple derivatives or multiply two matrices.

I was never taught how to do either of those things. Am I missing out on something?

Re:Ask HN: What technologies did you learn in 2018? by corysama on Sunday December 23, 2018 @01:49PM (#18747632)
If you want to do machine learning, those two ops are pretty much the foundation of how it works under the hood.

If you want to do coding in general, I like to say that you can have a career in code without being good at math. But, math is how great coders do what seems like magic to other coders.

Re:Ask HN: What technologies did you learn in 2018? by jmkni on Sunday December 23, 2018 @02:38PM (#18747878)
That’s a really nice way of putting it.

As a grown up who has already been working as a software developer for ~10 years, do you have any recommendations on books to read, courses to do etc if I want to improve my maths? I’m not terrible, but I know I could be a lot better!

Re:Ask HN: What technologies did you learn in 2018? by anpat on Sunday December 23, 2018 @03:01PM (#18747989)
I was on the same boat as yours about 3 months ago and I picked up 3 books based on HN comments;

1. No bullshit guide to Maths and Physics [1]

2. No bullshit guide to Linear Algebra [1]

3. A programmer’s introduction to mathematics [2]

I haven’t gone through the books completely but I’m halfway through the ‘no bullshit..’ books and I liked them based on how easy they were for me to approach.

May be they also fit your learning style as well? Hope this helps and happy learning.

[1] : https://minireference.com

[2] : https://www.amazon.com/dp/1727125452

Re:Ask HN: What technologies did you learn in 2018? by shriek on Sunday December 23, 2018 @07:56PM (#18749518)
I'm same as you too but I did have some background in math from college but I've been rusty on them already.

- I know it's said over and over again but KhanAcademy is pretty good for high-school math - For probability, I'm also going over this website[1] at the moment. Maybe someone else has other recommendations too - Linear Algebra is next on my list but others have given some reference for it already - Andrew Ng's course on Machine Learning from Coursera is also another frequently recommended if you are trying to learn math for it

[1] https://www.probabilitycourse.com/

Re:Ask HN: What technologies did you learn in 2018? by mrsln on Monday December 24, 2018 @03:30AM (#18751124)
https://news.ycombinator.com/item?id=18741229 - what do you think about this? Is it really pointless to learn ML unless you're going to work in a big company that have access to a lot of data?
Re:Ask HN: What technologies did you learn in 2018? by dominotw on Sunday December 23, 2018 @09:25AM (#18746214)
curious, what you are planning to do with the new knowledge
Re:Ask HN: What technologies did you learn in 2018? by gcb0 on Sunday December 23, 2018 @01:33PM (#18747541)
> derivatives or multiply two matrices

> college math

Those should be high school on most places

Re:Ask HN: What technologies did you learn in 2018? by ilikehurdles on Sunday December 23, 2018 @03:12PM (#18748057)
Derivatives were available for the most advanced level students in high school where I went. Even then it was understood that they were receiving college credit early. Linear algebra not at all.
Re:Ask HN: What technologies did you learn in 2018? by thealfreds on Sunday December 23, 2018 @03:25PM (#18748121)
Not too much with linear but usually 10th or 11th grade math will introduce matrix multiplication.
Re:Ask HN: What technologies did you learn in 2018? by justwalt on Sunday December 23, 2018 @07:06PM (#18749298)
Which is odd, in my opinion. Linear algebra is easier than Calculus and would likely be more useful to the average person.
Re:Ask HN: What technologies did you learn in 2018? by ilikehurdles on Sunday December 23, 2018 @08:12PM (#18749578)
Agree completely. In my university, calc was a pre req for linear algebra and it didn’t make any sense to me then either.
Re:Ask HN: What technologies did you learn in 2018? by sedatk on Sunday December 23, 2018 @01:56PM (#18747671)
Yes, those are thought in high school in Turkey.
Re:Ask HN: What technologies did you learn in 2018? by hekillno on Sunday December 23, 2018 @09:28AM (#18746230)
can non-CMU student learn that class online?
Re:Ask HN: What technologies did you learn in 2018? by yogeshp on Monday December 24, 2018 @01:00AM (#18750663)
Prof Tom Mitchell's video lectures for 10-601 are available online: http://www.cs.cmu.edu/~ninamf/courses/601sp15/lectures.shtml
Re:Ask HN: What technologies did you learn in 2018? by dsiegel2275 on Sunday December 23, 2018 @03:42PM (#18748191)
No, that specific class isn't available to non CMU students or staff (of which I am the latter).

There are several CMU courses, however, where the full collection of lectures are available to watch on YouTube. The Fall 2017 offering of Mathematics for Machine Learning lectures are all on YouTube.

Re:Ask HN: What technologies did you learn in 2018? by senorsmile on Sunday December 23, 2018 @12:51PM (#18747331)
I would like to know the same.