Red is another language that is or was striving for simplicity (or resisting the complexity that seems to be the norm in tech nowadays). In fact that was supposed to be one of its main goals. I felt sad when they went down the ICO route for funding, though.
Not sure how FP-ish Red is, though. Rebol, which Red is based on, is supposed to be homoiconic. I like Rebol and Red.
The size of the Rebol and Red interpeters (and Red is a compiler too) and the size of the Red EXEs are quite small, which is another plus. Much smaller than some other languages.
I should say, sometimes seemingly unnecessary complexity.
I find that after roughly two years of writing Rust, I can architect and re-architect big projects fairly clearly, and the type system gives me strong reassurances that refactors haven't screwed things up.
Not to mention the advantage of even simple things like enums, which most languages (including Go) tend to lack.
Millions of little decisions with respect to which lifetimes to use, which types to use, which type of pointer to use, whether to pass by ref or by copy, and so on.
> I find that after roughly two years of writing Rust, I can architect and re-architect big projects fairly clearly, and the type system gives me strong reassurances that refactors haven't screwed things up.
> Not to mention the advantage of even simple things like enums, which most languages (including Go) tend to lack.
I don't doubt it. I think these are really cool properties of Rust. They just don't pay for the cognitive burden, since the applications I write aren't critical systems (I can afford _some_ unsafety, but I can't afford to slow my development process).
To put it differently, if I write in Go, I can quickly ship a feature with a high degree of confidence that it's overwhelmingly correct, and the few errors that do slip into production can be quickly fixed because I can iterate so quickly. If I write in Go, I will eventually ship a feature with a very high degree of confidence that it's overwhelmingly correct, but even if I find zero bugs in production, the time spent shipping the first iteration in Rust is much larger than the time it would spend me to ship _and_ iterate on bugfixes in Go. I'm sure the extent to which this is true shrinks as I get more experience with Rust, but there's a law of diminishing returns at play, and no indication that the gap will ever vanish entirely.
However, for compilation errors, feedback is instant, because cargo check (which runs everything except codegen) is almost instantaneous. I've also set up neovim to give run it on every save (via a plugin), so I don't have to leave my editor for this. I know that VS Code and IntelliJ also do this.
You’d use the “new type pattern”, which is like a named 1-tuple:
struct FirstName(String);You could write your own string parameterized in this way, but it would be incompatible with the standard library String and so you’d need the same conversion steps.
In any case, it's a far cry from `go build`.
[Edit: I'd add a few things to your feature list: really fast, OCaml-speed compilation, along with a utop-like REPL]
Why is it not? Hadn't heard of this point before. Is it because of catering to the most common use cases, which are not fine-grained, maybe?
I wish the EXE/binary sizes of Go programs were smaller, though I know they've done some work on that too. Coming from a C background originally, I was a bit surprised when I first saw that the size of a simple hello-world-style Go binary was ~1 MB (some years ago). Equivalent Free Pascal and D binaries are a lot smaller, IIRC, from what I tested at the time (~100 KB or less). Heck, the Red interpreter / compiler (and the Rebol interpreter before it) fit in ~1 MB. Don't mean to denigrate the efforts of the Go team at all (even apart from the fact that as a long-time Unix guy, Rob Pike, Ken Thompson, et al are among the people I look up to); I know language translation technology is a hard field, plus the scope of Go may be much more than that of Rebol / Red; just speaking from the POV of a user, hoping for smaller binary sizes.
AFAICT that's a compiler optimization, not a runtime optimization. But yes, generally the Go team is working to improve performance.
> I wish the EXE/binary sizes of Go programs were smaller, though I know they've done some work on that too. Coming from a C background originally, I was a bit surprised when I first saw that the size of a simple hello-world-style Go binary was ~1 MB (some years ago). Equivalent Free Pascal and D binaries are a lot smaller, IIRC, from what I tested at the time (~100 KB or less). Heck, the Red interpreter / compiler (and the Rebol interpreter before it) fit in ~1 MB. Don't mean to denigrate the efforts of the Go team at all (even apart from the fact that as a long-time Unix guy, Rob Pike, Ken Thompson, et al are among the people I look up to); I know language translation technology is a hard field, plus the scope of Go may be much more than that of Rebol / Red; just speaking from the POV of a user, hoping for smaller binary sizes.
Go binaries contain _everything_, while C programs (usually) statically link against libc (glibc is on the order of 10mb by itself). Go's runtime is also quite a lot more complex than C's--it comes with a scheduler, a reflection system, and a garbage collector. These are one-time costs--the binary for a program 10 times the size of hello world is pretty much the same size as the hello world binary. If you really want, you can dynamically link a Go program, but I can't imagine a scenario where this is practical.
Right, it is a compile time one.
>Go binaries contain _everything_, while C programs (usually) statically link against libc (glibc is on the order of 10mb by itself).
Did you mean "dynamically" (for C) [1]? Also, I'm not too sure if Go links all dependencies statically by default, if that is what you implied above. IIRC I read somewhere recently that some things are linked statically, and some dynamically - I need to check that.
[1] I need to check it for C too, because things have changed since I last used C a lot.
>Go's runtime is also quite a lot more complex than C's--it comes with a scheduler, a reflection system, and a garbage collector. These are one-time costs--the binary for a program 10 times the size of hello world is pretty much the same size as the hello world binary.
Agreed on the points about the other stuff Go has that C does not, like a GC, reflection, etc. And that those are one-time costs. But they are still costs, and if you create lots of small binaries, that cost adds up. Disk space is cheap nowadays, but depending on the use case and your environment (e.g. small or embedded system, cost constraints if shipping many copies of a h/w + s/w product or appliance, etc., that cost might be significant. Whereas with some of those other languages that I mentioned above, those costs can be quite a bit less, times the number of copies of binary or appliance that you ship. That's all that I meant. That's not to say that we should not use Go, though, of course. As always, the overall picture and all factors need to be taken into account, e.g. the benefits of Go's language features vs. some of those others, team knowledge of the various language contenders, even availability of needed libraries, time to market, etc. etc.
Yeah, I did. Good catch.
> Also, I'm not too sure if Go links all dependencies statically by default, if that is what you implied above. IIRC I read somewhere recently that some things are linked statically, and some dynamically - I need to check that.
By default, Go does dynamically link to some things--it will prefer to use the system DNS resolver if one is available, for example. But you can disable this by setting `CGO_ENABLED=0` at compile time. If you do this, a Go program needs nothing more than a linux kernel (no system libraries or even libc) and whatever other files it requires (certificates, for SSL for example).
> I need to check it for C too, because things have changed since I last used C a lot.
I'm sure you can make statically-linked C programs which are smaller. For example, the musl libc implementation is quite small and designed for static linkage. But lots of libraries break (often in bizarre and hard-to-debug ways) if they don't link against glibc specifically, so it's not a panacea.
> But they are still costs, and if you create lots of small binaries, that cost adds up. Disk space is cheap nowadays, but depending on the use case and your environment (e.g. small or embedded system, cost constraints if shipping many copies of a h/w + s/w product or appliance, etc., that cost might be significant.
Agreed, but again, Go does allow for dynamic linkage in those cases so you can conserve disk space. There's no doubt that if you're golfing, C allows for smaller binaries than Go, but Go can meet 99.9% of real-world requirements when it comes to size (if you're at the extreme end of what Go can support, you've probably already ruled out Go for other reasons).
There are still many reasons to pick other languages besides Go--if you're working on a hard real-time system, if you're working with a team of people who all prefer a different language, if you're working in a domain (iOS app dev, for example) for which there are no good Go libraries, if you're willing to trade all else for extreme performance or extreme correctness, etc. But Go is actually a pretty good little language for most things that aren't at those extremes.
Ah, sounds similar to what it says in the osso.nl link I posted below. Good to know.
>I'm sure you can make statically-linked C programs which are smaller. For example, the musl libc implementation is quite small and designed for static linkage. But lots of libraries break (often in bizarre and hard-to-debug ways) if they don't link against glibc specifically, so it's not a panacea.
Didn't know this, interesting. But actually, I didn't mean making statically-linked C programs smaller by using leaner libraries like musl. I just meant that for equivalent code, the resulting C binary (even when using the default libc) was smaller by a lot than the Go binary. And so were the Free Pascal and D binaries smaller than the Go binary, but they were both slightly larger than the C binary. But it was only an anecdotal observation based on writing a few small programs in C, Go, Free Pascal, and D, and comparing the resulting binary sizes. Not a thorough scientific study.
>Agreed, but again, Go does allow for dynamic linkage in those cases so you can conserve disk space.
Got it.
>>There's no doubt that if you're golfing, C allows for smaller binaries than Go, but Go can meet 99.9% of real-world requirements when it comes to size (if you're at the extreme end of what Go can support, you've probably already ruled out Go for other reasons).
It wasn't about golfing, it was about equivalent code in the two languages, and the relative sizes of the resulting binaries. But good last point (about 'other reasons').
>There are still many reasons to pick other languages besides Go--if you're working on a hard real-time system, if you're working with a team of people who all prefer a different language, if you're working in a domain (iOS app dev, for example) for which there are no good Go libraries, if you're willing to trade all else for extreme performance or extreme correctness, etc. But Go is actually a pretty good little language for most things that aren't at those extremes.
Agreed. In that sense it is somewhat like Python, which is sometimes described as "the second-best language for almost any domain", an interesting description that I read only somewhat recently. I wouldn't necessarily fully agree with that description, it is probably the best language or at least equally the best (with some other language) for certain areas. Similarly, there are probably areas where Go is, if not the best language, one of the best, for certain kinds of tasks, such as the command-line utilities, web and network server applications that it is often used for.
Update: Found this page which seems to make sense:
The features are there, 90% of the cases it doesn't matter for the typical use cases.
When it does matter, they are in reach to any savy Haskell developer.
Is it really so. I am only asking. A mathematical model allows deeper insight on structure (backed by hundreds of years of prior mathematical thought), and we then sugar it appropriately for users. Just like civil engineers who learn Strength of Materials etc mathematically before they design the bridges we drive over daily.
Tooling is one of my gripes also. There was a time decades ago when I couldn't go beyond compiling the simple hello world example. This has gotten much better after many years. Same with Haskell. Is this due to difficulties in getting the necessary financial support.
I've seen a number of projects (often in JavaScript or Python) fail because of poor effect management—but if you don't have much experience with functional programming, you'd see it as yet another project failing because of bad development practices or lack of discipline.
With experience, it became pretty clear that what we needed were not iron-willed, self-disciplined developers but just better tools, of which effect management (ie monads) and functional programming are some of the most powerful.
OCaml less so, but the Jane Street monoculture means that, if it's not itchy for a trading firm, it's not gotta get scratched. Trading's an odd industry, tech-wise. There are aspects of the OCaml ecosystem that eliminate any of my own desire to use the language that I would have seen as neutral or even strongly positive when I worked at a trading firm. (At least during working hours.)
So, yeah, I do think that one of the big things that's missing from typed FP right now is a strong language that has similar semantics to an ML or (preferably) Haskell, but with a much more pragmatic focus. F# is really nice if .NET is an option for you, but I'd sure like to see something that is statically compiled and can produce C-friendly binaries, so that it can play nice with a wider variety of pre-existing codebases.
As for compilation time, Go compilers use very basic optimizations as such they tend to compile faster, but hardly impressive for those that ever used TP, C++ Builder, Delphi, Modula-2 and similar languages.
Can you give some examples? Really curious.
I'm guessing 8-bit strings is a minor positive, on the basis that you really don't need to deal with non-ASCII text in that kind of setting, and there's probably some performance benefit to not supporting it. Even if you stick to characters from 7-bit ASCII in your own data, if the strings are technically UTF-8 or UTF-16, then the fact that it's a variable-length encoding means that more string operations will involve costly branch instructions. And if UTF-32, your strings will be 4x as big as they need to be.
Not working on non-Unix is neutral. There's no benefit to it, but nothing was going to be running on Windows, anyway, so there'd have been no harm in it, either.
What does this mean?
[0] https://crystal-lang.org/docs/syntax_and_semantics/blocks_an...
[1] https://docs.microsoft.com/en-us/dotnet/csharp/programming-g...
I've played with it a bit, haven't seen problems with compile times, they were actually pretty good.
The nice thing about Crystal is that it is extremely easy to use, terse code, easy macros, fast executables, algebraic types, good packaging story - in general very good ergonomy.
I hope it'll pick up one day.
[0] https://crystal-lang.org/docs/syntax_and_semantics/literals/...
I would love to see a typed FP equivalent to Go—everything is super simple/small learning curve (I should be able to meaningfully contribute to a project after a day or so), the standard library is decent, package management just works, no guessing about what test lib to use, everything compiles to a single static binary by default (dead simple deployments), no-fuss documentation generation, great concurrency/parallelism story, straightforward profiling and optimizations (e.g., if my program is slow because I’m allocating too much in the hot path I can trivially preallocate), etc. These are the things that matter for real world projects—mathematically elegant type systems really are just gravy, which is why Go has been able to be so successful in spite of its flat-footed type system.^1
^1: if you go over to r/programming, no one can figure this out because everyone believes you can’t ship Software in a language without monads or generics, so Go’s popularity must be due to Google marketing.