News for hackers. Stuff that matters.
Re:EPA is allowing asbestos back into manufacturing by ChrisRR on Tuesday August 07, 2018 @10:07AM (#17706701)
This makes sense as asbestos only really causes harm when humans come into contact with it. For applications where it is safely enclosed or mixed with another material it may have its uses.

I think analysis on a case-by-case basis is the right way to go.

Re:EPA is allowing asbestos back into manufacturing by ethagknight on Tuesday August 07, 2018 @11:43AM (#17707637)
It does make sense, and I get frustrated by the blanket reactions below. In my line of work redeveloping historic buildings, asbestos is just another item to deal with. Some of the asbestos we encounter is friable, where we have to seal off a room with plastic, have all workers in hazmat suits, keep the material wet at all times, double bag it, and send it off to a special landfill in a sealed-top dumpster. Non-friables are much easier to safely remediate. Furthermore, asbestos that is encapsulated is safe to be left in place undisturbed.

It stands to reason that if there is a non-friable, encapsulated use where asbestos' natural properties make a significant impact, them we should at least consider their potential benefits as well.

Asbestos is a cheap and natural product with dangerous side effects. Much like oil. Allowing ways to use it safely is a worthwhile consideration.

EDIT: thinking back, the real pain in the ass with asbestos in my buildings is when it is glued down or otherwise affixed, and cannot be lifted away cleanly. Even in friable asbestos applications, if it can be removed or replaced relatively cleanly, then its not a big deal.

EDIT 2: to put numbers to the abatement discussion, we typically spend 1.5% of our construction budget on abatement. $30mm construction budget will cost $450k to remove it all properly, and in these buildings, asbestos and lead is everywhere. The bigger hit to us is on schedule, where we have to set aside an additional month or 2 to let the abatement guys have a whole floor at time, sometimes having to make 2 passes to abate the surface finishes like floor and ceiling tile, then come back through after general demo to remove pipe insulation, mastics, etc. The schedule hurts.

Re:EPA is allowing asbestos back into manufacturing by rc_bhg on Tuesday August 07, 2018 @10:20AM (#17706841)
Case-by-case analysis is really expensive for a government agency to do. And you know full well that developers will cut corners at any chance they can if the rules are loosened up.
Re:EPA is allowing asbestos back into manufacturing by tomp on Tuesday August 07, 2018 @10:35AM (#17706983)
If we banned all uses of harmful substances, many things (e.g. spaceflight) wouldn't be possible (or at least much more expensive) (e.g. most hypergolic propellant used for fine maneuvring e.g. during docking are extremely poisonous - alternatives are being tested but aren't there yet).
Re:EPA is allowing asbestos back into manufacturing by boobsbr on Tuesday August 07, 2018 @11:27AM (#17707460)
Yeah, hydrazine came to my mind instantly.

That stuff is scary.

Re:EPA is allowing asbestos back into manufacturing by ethagknight on Tuesday August 07, 2018 @11:48AM (#17707681)
Case-by-case could be an industry wide standard with Operations & Maintenance requirements, which is what we currently have in real estate surrounding existing asbestos and lead applications. A similar protocol surrounding implementation of new "safe" installations of asbestos-containing-materials could be developed.
Re:EPA is allowing asbestos back into manufacturing by mywittyname on Tuesday August 07, 2018 @10:22AM (#17706861)
In what cases would you use it where humans wouldn't be in contact with it eventually?
Re:EPA is allowing asbestos back into manufacturing by ChrisRR on Tuesday August 07, 2018 @11:49AM (#17707699)
As far as I know asbestos was often mixed with cement for insulating properties. And in this case was often deemed unharmful.

Maybe it'll find uses in locations that use cement that requires thermal insulation but isn't exposed to humans.

Re:EPA is allowing asbestos back into manufacturing by CydeWeys on Tuesday August 07, 2018 @03:27PM (#17709753)
What about during demolition, including unplanned demolition such as what happened on 9/11? A lot of people got sick and died from breathing in that dust.
Re:EPA is allowing asbestos back into manufacturing by superkuh on Tuesday August 07, 2018 @11:17AM (#17707362)
Electrolysis membranes.
Re:EPA is allowing asbestos back into manufacturing by debacle on Tuesday August 07, 2018 @10:33AM (#17706968)
One thought would be as a cement additive in marine applications.
Re:EPA is allowing asbestos back into manufacturing by jdironman on Tuesday August 07, 2018 @10:36AM (#17706992)
What about asbestos and marine wild life?
Re:EPA is allowing asbestos back into manufacturing by pard68 on Tuesday August 07, 2018 @10:42AM (#17707054)
Genuine question, if you do not have lungs does asbestos have any negative impact on you? Marine animals either hold their breath and come up for air or have gills.
Re:EPA is allowing asbestos back into manufacturing by AngryData on Tuesday August 07, 2018 @11:31AM (#17707511)
If it becomes loose in the water it would get in their gills and bottom feeders would suck it up off the sea floor and harm them the same way it harms lungs. That said, im not sure there would be loose pieces of it leaving the cement. Plus if someone REALLY wanted the properties of asbestos, there are plenty of ceramic wools that are pretty much identical products (with the same risks of asbestos) that are comparable in price and not subject to the same kind of rules. However nobody that makes ceramic wool would be dumb enough to pretend that shit isn't harmful to be exposed to.
Re:EPA is allowing asbestos back into manufacturing by hokumguru on Tuesday August 07, 2018 @11:33AM (#17707543)
I would wager that most marine animals would be unaffected. Mammals would hold their breath, and any other animal with gills already deals with fine-grained sediment.
Re:EPA is allowing asbestos back into manufacturing by boobsbr on Tuesday August 07, 2018 @11:28AM (#17707482)
Might perforate the blood vessels in the gills and enter the blood stream? Later on we eat it?
Re:EPA is allowing asbestos back into manufacturing by aurailious on Tuesday August 07, 2018 @12:25PM (#17708038)
Deep space probes?
Re:EPA is allowing asbestos back into manufacturing by randcraw on Tuesday August 07, 2018 @11:26AM (#17707457)
If asbestos is enclosed, what's the point in using it? Why not just build the entire object using the material that enclosed the asbestos?

Safety analysis on a 'case-by-case basis' will take place where the product is made, not where it's sold. In China. So you believe Chinese inspectors will keep Americans safe?

Re:EPA is allowing asbestos back into manufacturing by throwawaymath on Tuesday August 07, 2018 @11:46AM (#17707667)
> If asbestos is enclosed, what's the point in using it? Why not just build the entire object using the material that enclosed the asbestos?

Asbestos is carcinogenic because it's extremely fibrous. By enclosing asbestos you mitigate its deleterious effects on human lungs. However, you do not remove its insulation properties, which may not be shared by whatever is physically enclosing it.

Simply put: all you need to prevent fibrous material from entering the lungs is a physical barrier. But a physical barrier is insufficient to provide insulation. Sandwiched asbestos provides insulation that the enclosure material cannot provide on its own.

Re:EPA is allowing asbestos back into manufacturing by grenoire on Tuesday August 07, 2018 @11:31AM (#17707512)
Because the material itself may not have the insulating properties of asbestos itself. Additionally the material enclosing might be more expensive than asbestos too.
Re:EPA is allowing asbestos back into manufacturing by jccalhoun on Tuesday August 07, 2018 @10:23AM (#17706880)
Can it be mined or mixed with other material without people coming into contact with it?
Re:EPA is allowing asbestos back into manufacturing by ankka on Tuesday August 07, 2018 @10:58AM (#17707202)
The manufacturing process pretty much always involves humans.
Re:EPA is allowing asbestos back into manufacturing by dominostars on Tuesday August 07, 2018 @10:19AM (#17706828)
Like what kinds of used?
Re:EPA is allowing asbestos back into manufacturing by zorkw4rg on Tuesday August 07, 2018 @10:33AM (#17706972)
Isn't that anyways now different, I mean asbestos is dangerous when its in the air but:

> The report states that the agency will no longer consider the effect or presence of substances in the air, ground, or water in its risk assessments.

Therefore if they don't consider effects from having it in the air asbestos is not dangerous anymore? This article must seriously misrepresent the facts, I can't believe that even post-Trump / GOP are this insane.

Re:EPA is allowing asbestos back into manufacturing by skummetmaelk on Tuesday August 07, 2018 @10:27AM (#17706911)
Leaded paint is only really dangerous if you pry it off the wall and swallow it. Who would do that?
Re:EPA is allowing asbestos back into manufacturing by usefulcat on Tuesday August 07, 2018 @11:06AM (#17707259)
Or, much more likely, if you create a fine dust by sanding it.
Re:EPA is allowing asbestos back into manufacturing by cure on Tuesday August 07, 2018 @11:00AM (#17707214)
Or if it is pulverized into dust and becomes airborne, like when you open/close an old painted window, or door.
Re:EPA is allowing asbestos back into manufacturing by ars on Tuesday August 07, 2018 @12:52PM (#17708299)
And yet there is a nice chunk of lead in my car.

It's all in how you use it, asbestos included.

Re:EPA is allowing asbestos back into manufacturing by DiabloD3 on Tuesday August 07, 2018 @11:07AM (#17707273)
Or breath in the dust as the paint degrades in an alarmingly short time.
Re:EPA is allowing asbestos back into manufacturing by rdtsc on Tuesday August 07, 2018 @04:50PM (#17710665)
Kids do that. The paint chips even have a sweetish taste to it.