In other words, if this costs 5¢ more then it is worth spending an extra 5¢ on if you keep from throwing at least 5¢ of product out. Below this it is better to throw a little product away. (However, consumers might overvalue being able to use the last little bit of product. Perhaps they value at 25¢ to not throw the last 1/30th of the product away, even though they paid less than $7.50 for the whole package. i.e. perhaps they paid $5.00 but would pay $5.25 to keep from throwing away the last 1/30th of the product. However this seems unlikely!)
More likely, if it costs 25¢ it is more economical to throw away, for example, 5¢ of product instead, by not having it.
However this analysis assumes that the 25¢ is passed onto the consumer. If the consumer is very price-sensitive (for example there is a standard price and very standard volume, as is the case with milk, though that isn't dispensed this way) then adding this as a competitive advantage would benefit the consumer, while the supplier eats the costs as a cost of acquiring this consumer.
This is my quick analysis.
The weighted end will tend to go towards where the liquids are. Imagine a bottle being held lengthwise. The weighted end will be in the same location as where the liquid is.
Turn the bottle upside down... the weighted end drops to where the top of the bottle is, along with where the water is.
Standard pressure thingies still work - you still get a spray. No need for custom membranse.
For the example above, is the goal to be able to spray upside down? To ensure that the sprayer is able to spray a higher percentage of what's in the bottle? How large is that percentage improvement (90% up to 95%?), what's the incremental cost of increasing that percentage, and what is the actual worth of 5% of the contents of the bottle?
A draw tube that is flexible enough to fold in half, strong enough to not kink, sturdy enough to not collapse when bursts of suction are applied, weighted enough to stay in liquid, strong enough to assemble quickly and easily, etc. is probably also expensive enough to just not be an economical solution.
By the way, if you don't purchase cleaning supplies regularly you may have missed that a lot of those tubes have gone away - they're now molded as part of the bottle so just tipping the bottle will put all remaining liquid at the intake point.
I'm not sure you could actually make it work upside-down without crimping, but at any normal usage angle it works great.
Metal could interact with and damage a lot of different things.
In a business that operates at a scale of 100s of thousands if not millions of bottles sold annually, cents matter and can make up a significant portion of revenue.
With this in mind, there is a huge incentive to get people to buy sooner rather than later and more often. Forcing a small amount to remain in a used up bottle is definitely a benefit to the company even if the product is going to waste. This doesn’t include the cost of implementing something new. I’d imagine a company would do extensive survey based research to understand if the additional customer satisfaction would outweigh the costs/downsides.
If it’s not a conscious decision, it’s a nice coincidental benefit to them.
Potato chip companies reducing the quantity of chips in a bag but keeping the size and price same. Because they were unable to raise prices with older packaging. Typically customers didn’t look at weight, just size of package. It was in the news for quite a while and IIRC there is a business case study.
It has been happening in beverages and other items too. Why do you see now package weights of odd numbers like 11.5 or 14.5 oz instead of standard number like 12 oz or 16 oz with typically no price reduction.
Recently I encountered same behavior with toothpaste tube in Japan. To keep the form/shape of the toothpaste tube with usage the nozzle was designed to suck in air to fill new space in the tube. My wife claimed we are out of toothpaste and wanted to throw away the tube. The toothpaste tube was perfectly formed but I noticed tube was still little heavier than I would expect for a empty plastic tube. But when you squeeze the tube mostly Air was coming out with little bit of spray of paste. Reducing the air space with paper clip, we were able to use paste from same tube for another 2 weeks. Typical behavior would be most probably what my wife was going to do to throwaway old one and open a new one.
They have teams that actively engage with new suppliers and inventors and are also getting pitched constantly with new ideas. It's most likely that extensive testing and consideration showed that this wasn't worth the costs. You even described such a scenario so I'm not sure why you think that's stupid or apathetic, when it's actually quite calculated.
Business benefit supersedes customer benefit. Always.
I also think some people go on the show knowing that they're not going to get investment at a sensible equity level, and are really on there as a way of marketing their idea to a wider audience.
From my perspective, having a great idea is not enough. Even having a proof of concept is not enough. There's a lot more that goes into building a successful business. Investors have to price in the chances of all the things that can go wrong in the process against the perceived value of the product.
Likewise, as a founder, you often need at least some investors that can help propel you forward in some way. That can be worth a lot more than dumb money.
I haven't watched the episode you mention, but generally this is how I think about it.
Which is the infuriating part, when the "investors" contribute nothing to the project but a tiny slice of money they didn't work for to begin with, and get vastly disproportional returns for it.
There are a limited number of good opportunities to invest in, so it's not like investors get to unilaterally set the terms of these deals. They have to compete with each other, at least on the most attractive deals. A savvy founder turns down money on bad terms.
If we wanna keep it in terms of a capitalist market, the problem is that investors are essentially selling a service just like anyone else, but because wealth inequality is where it is, there's relatively little competition in that "market". Thus, what you get is very high "prices" for relatively poor "service". This is a problem.
In an ideal free market, investors are just another kind of business, and would compete both on price and their offering such that everyone was getting a good deal and everything moved along efficiently. In the real world, investment is a very concentrated market, meaning that the deals are shoddy and inefficient.
[1] http://www.dailymail.co.uk/sciencetech/article-4335468/Briti...
I knew I did when reading this thread until I saw this comment.
Just pull the hose out and bend/twist it really hard in a specific direction. If it's not utterly stiff, winding it tightly around a pencil (or your finger, or just twisting the hose to that tight of a bend radius) is ideal. Hopefully this much flexing means that after naturally uncurling the curl will still "stick" to a useful degree for longer than a single usage.
One non-obvious extra detail: if the product is in a non-transparent spray bottle, before replacing the lid, rotate the spray pump so it faces the direction you've bent/curled the hose. Now a) you know which direction the hose is pointing and can eliminate "where is it in the bottle", and b) you just have to face it forward for it to work, which is intuitive.
http://www.dailymail.co.uk/sciencetech/article-4335468/Briti...
Instead of a normal plastic tube inside a bottle with an opening at the end, he designed a tube with millions of tiny perforations along its length. This meant the spray bottle could operate at any angle (even upside down) and could empty all liquid in a bottle with no leftover.
Here is a 1 min demo of the spray: https://vimeo.com/195318537
Here's an explanation of how it works https://www.youtube.com/watch?v=xXk46rvzdpY
And here's the original pitch he made on Dragon's Den https://www.youtube.com/watch?v=RjOvyjeZyIw