News for hackers. Stuff that matters.
Re:A guide to building a fast electric skateboard at home by keyle on Saturday April 21, 2018 @08:15PM (#16894079)
Very cool but the original board was never designed to go at such speeds. I suspect you'll ruin the wheels fairly quickly, not to mention you might lose control at high speed fairly fast. I'm not a skateboarder myself, but I've moded some bikes and adding speed is the easiest part, making it useful speed is way harder.

Also, I hope the engine can go in reverse or this guy has no breaking power; and as he gets comfortable riding it, sooner or later, a surprise will happen and he will have no choice but jump ship.

Re:A guide to building a fast electric skateboard at home by edaemon on Sunday April 22, 2018 @01:11AM (#16894807)
Regular longboards go much faster than an electric one like those described here. I recently built an electric skateboard using one of the ESCs in this post and on flat ground it can't go much over 20mph. It goes far faster than that on even a slight slope. Maintaining control at that speed is dependent on the trucks.

The ESCs do have brakes. They make downhills easy to manage. The only problem is that, without some special components, the brakes don't function on a 100% full charge. (The brakes are regenerative, so the ESC watches the voltage and doesn't allow the motors to overcharge the batteries.) That's not a problem in 99% of cases -- it only matters if you start your trip on a large downhill.

That said, anyone learning to ride an electric skateboard should learn how to bail. You'll have to do it eventually.

Re:A guide to building a fast electric skateboard at home by hnaccy on Saturday April 21, 2018 @08:49PM (#16894168)
A longboard downhill can easily go over that speed.
Re:A guide to building a fast electric skateboard at home by nathancahill on Saturday April 21, 2018 @08:54PM (#16894184)
I hit that speed regularly on mild downhills. Bombing a hill you can hit 80km/h pretty easily. I think the record is around 140km. Certainly not bragging, as it's not that impressive among downhill longboarders. Just trying to give some perspective.
Re:A guide to building a fast electric skateboard at home by rollcat on Sunday April 22, 2018 @08:30AM (#16895886)
The latest record (2017) is ~150kmh
Re:A guide to building a fast electric skateboard at home by paulcole on Saturday April 21, 2018 @10:02PM (#16894348)
What are you using to measure your speed? Do longboarders have an equivalent of Strava?
Re:A guide to building a fast electric skateboard at home by loeg on Saturday April 21, 2018 @10:38PM (#16894437)
Sure, you can easily wear a GPS watch while longboarding.
Re:A guide to building a fast electric skateboard at home by paulcole on Saturday April 21, 2018 @10:42PM (#16894446)
Yeah I wasn’t asking hypothetically. I wanted to know what they actually used to record their speed.
Re:A guide to building a fast electric skateboard at home by vuln on Saturday April 21, 2018 @10:55PM (#16894479)
Re:A guide to building a fast electric skateboard at home by nathancahill on Saturday April 21, 2018 @11:30PM (#16894573)
Re:A guide to building a fast electric skateboard at home by CyberDildonics on Sunday April 22, 2018 @09:34AM (#16896092)
There are some exotic cars that use GPS to measure their speed to save weight by not using a typical speedometer.
Re:A guide to building a fast electric skateboard at home by opencl on Sunday April 22, 2018 @10:51AM (#16896399)
Do you have a source for this? It doesn't seem to make any sense because the speed sensor is normally used as an input for the engine and brake control systems. Not to mention the fact that the sensor is already extremely light because it's just a rotary encoder. GPS is also wildly inaccurate for speed measurement at low speeds and near tall buildings. I can certainly see using it in addition to a normal speed sensor for better accuracy at speed but as a replacement for weight savings it seems very unwise.
Re:A guide to building a fast electric skateboard at home by toss1 on Monday April 23, 2018 @10:53AM (#16903885)
Indeed, I'd actually expect exotics of all cars to have 4-wheel speed sensors for traction control, launch control, etc.

I'd expect to use this 4-wheel sensor data along with the multi-axis acceleration data to calibrate the GPS, not the other way around.

Re:A guide to building a fast electric skateboard at home by CyberDildonics on Tuesday April 24, 2018 @04:33PM (#16916271)
It was a custom car on Jay Leno's garage though I forget which one. Maybe a lotus.
Re:A guide to building a fast electric skateboard at home by soVeryTired on Saturday April 21, 2018 @08:53PM (#16894178)
But then you get speed wobbles...

https://imgur.com/auUscXX

Re:A guide to building a fast electric skateboard at home by hug on Saturday April 21, 2018 @10:11PM (#16894370)
What you're talking about is yaw inertia, and as another comment points out it's solved by moving the weight to the front wheels.

See an explanation here: https://en.wikipedia.org/wiki/Automobile_handling#Yaw_and_pi...

And a 30 second visualistion here: https://www.youtube.com/watch?v=4jk9H5AB4lM

Re:A guide to building a fast electric skateboard at home by rhizome on Saturday April 21, 2018 @11:21PM (#16894554)
Would that I had that knowledge 30 years ago!
Re:A guide to building a fast electric skateboard at home by radium3d on Saturday April 21, 2018 @08:55PM (#16894190)
When longboarding downhill at high speed you need to put most of your weight on the nose of your board. This will prevent speed wobble completely (may depend on your board.) Source: bombing hills myself
Re:A guide to building a fast electric skateboard at home by mcshicks on Saturday April 21, 2018 @09:11PM (#16894233)
Yeah I think if you are a downhill skater (I'm not) then maybe you it's not a problem, but seriously if you are not a good skater I really would not recommend going any faster than you can run on one of those things (or even a regular skateboard for that matter), pads or no pads. Source: skating parks for over 30 years (and still suck).
Re:A guide to building a fast electric skateboard at home by rollcat on Sunday April 22, 2018 @08:40AM (#16895912)
Easy, lots of things you can do to prevent that. On the hardware side, tighten your trucks a bit (not too much as it will damage the bushings over time), use harder bushings (cheap), use a lower-angle baseplate for the rear truck (a bit more investment).

As hug mentioned, shifting weight helps. Also as you begin to catch wobbles, you can relax your stance a little bit to counteract them - but that takes practice. Finally, you simply control your speed - usually by sliding, but I can imagine on an e-board slides will be very cumbersome.

Of course if you know all of this, you probably already have realized that e-boards are barely good for anything but cruising from point A to B, and there's infinitely more breadth and depth to this sport than just that.

Source: I'm a roll cat ;)

Re:A guide to building a fast electric skateboard at home by truculation on Saturday April 21, 2018 @09:07PM (#16894225)
Yep, high speed can definitely ruin a wheel(!):

https://twitter.com/machinepix/status/969654857895301120

Re:A guide to building a fast electric skateboard at home by loeg on Saturday April 21, 2018 @10:39PM (#16894440)
That's a bit more than 50 km/h.
Re:A guide to building a fast electric skateboard at home by z3t4 on Sunday April 22, 2018 @05:15AM (#16895382)
not fair as those water jets can cut through just about everything.
Re:A guide to building a fast electric skateboard at home by grepthisab on Sunday April 22, 2018 @12:58PM (#16897058)
In this case the water jet isn't cutting anything, just spinning the wheel very, very fast.
Re:A guide to building a fast electric skateboard at home by serf on Saturday April 21, 2018 @11:09PM (#16894520)
>Also, I hope the engine can go in reverse or ..

Small nit, there are motors out there that offer resistance/braking without reversibility.