Re:Wi-Fi TimeSync
by johnm1019 on Thursday January 05, 2017 @04:55PM
(#13331780)
This is huge news to me. Standardized microsecond level wireless time sync available on cheap commodity hardware. We could've used this at the startup I was at 4 years ago. I see lots of uses in the AR space, along with device tracking algorithms.
Re:Wi-Fi TimeSync
by johnm1019 on Thursday January 05, 2017 @06:07PM
(#13332324)
Hah yes we did. Wires. Of course everyone wants wireless though and while it would've improved the overall experience I'm not sure it would've saved the company. Other market factors were making more of a problem than just delivering good tech :/
In further thinking about the idea, once the wifi devices are time synced like this, you can also begin to use that signal for localization in addition to the traditional optical or electromagnetic tracking. Fun!
Re:Wi-Fi TimeSync
by kbaker on Thursday January 05, 2017 @06:56PM
(#13332647)
You need better sync than ~1 microsecond to do time-of-arrival localization for Wi-Fi style signals, though... since RF waves travel at around 1 ft per nanosecond.
Ultra-Wideband devices can get this synchronization though, and can be used for localization.
Re:Wi-Fi TimeSync
by webmaven on Friday January 06, 2017 @08:03AM
(#13335934)
The Doppler effect would only help with a moving source or target, so probably not.
I would guess that what was meant was using two (or more) frequencies at the same time would produce harmonics that reinforce and cancel the combined signal at set distances from the source that can be used to get distance info, and if you can get distance to three different points, you get a 3D location[0]. The technique dates back to WWII.
Further, I think it works best if the frequencies are each a different prime (otherwise you get many beats). There are probably additional tricks you can do by varying the precise frequency combination to extract very fine-grained location data.
[0] Technically, you get two solutions, one on each side of the plane connecting the three points, but they can be disambiguated as long as direction can at least crudely be determined within 180°.
Re:Wi-Fi TimeSync
by jburgess777 on Friday January 06, 2017 @05:50PM
(#13341042)
DecaWave sell UWB modules that perform real-time location to ~10cm in a controlled environment: http://www.decawave.com/
I imagine that they use a system which is not too different to the way GPS combines the signals from multiple satellites to calculate the receiver location.
When you receive have a receive lock against multiple receivers, the spreading code allows you to determine time of flight to the nearest carrier cycle, and the carrier phase can provide even more precise timing. See also: https://en.wikipedia.org/wiki/Multilateration
Re:Wi-Fi TimeSync
by jlgaddis on Thursday January 05, 2017 @08:52PM
(#13333280)
A long time ago I wondered why home routers didn't run (or include, at least) an instance of ntpd in broadcast mode on the internal interface that clients could sync to.
You can run an NTP instance on your own, of course, and point clients at it via DHCP options but I thought something like that would be kinda handy for easily keeping time synchronized across all one's devices.
That doesn't really fit this use case, of course, but it reminded me of it. With more and more "home devices" being network-enabled, something like that would be extremely useful (and could put to an end "12 o'clock flashers").
Re:Wi-Fi TimeSync
by voltagex_ on Thursday January 05, 2017 @10:00PM
(#13333569)
Why run your own instance when you can just flog the crap out of the public pool for free? [1]
Digging into the internals of a few "high end" consumer modem/routers, I wouldn't trust any manufacturer to provide a secure ntpd, so we'd probably just end up with NTP amplification attacks [2] on a Mirai scale.
Re:Wi-Fi TimeSync
by oneplane on Thursday January 05, 2017 @09:58PM
(#13333563)
Mine does, but I suppose we're talking about standard CPE devices. They indeed only do the minimum and are often locked down to prevent you from adding or changing anything. All in the name of stability and customer experience. The reality is, of course, that it is way too expensive to support millions of home users when they start relying on the CPE for more services or start changing the settings.
Re:Wi-Fi TimeSync
by chemag on Friday January 06, 2017 @03:44PM
(#13340017)
I'm curious which are the use cases for sub-microsecond time sync. Entertainment can probably do with millisecond accuracy. Other use cases mentioned by the Wifi Alliance preso are healthcare, industrial, automotive, and IoT. Do you know any precise use cases?
Re:Wi-Fi TimeSync
by rocky1138 on Thursday January 05, 2017 @07:53PM
(#13332957)
I'm completely ignorant on the need for this technology. Can anyone explain a potential use-case? The website simply states "Home entertainment systems, automotive infotainment systems, and industrial sensor-based systems rely on precisely synchronized components to deliver optimum results."
Re:Wi-Fi TimeSync
by rtkwe on Thursday January 05, 2017 @08:04PM
(#13333049)
If you're playing the same audio from multiple sources but slightly out of sync the effect can be pretty unpleasant depending on the delay and how sensitive you are to timing.
Re:Wi-Fi TimeSync
by STRiDEX on Thursday January 05, 2017 @08:07PM
(#13333063)
My friend was using wireless speakers for his projector. Noticeable lag between the speakers and the mouths on screen. Ended up throwing wires to the speakers to fix it.
Re:Wi-Fi TimeSync
by tech2 on Friday January 06, 2017 @04:51AM
(#13335088)
Many systems (hell, even my almost ten year old mid-range Sony TV) have options to adjust audio offset. I'm surprised something like a projector or AV Amp wouldn't.
Re:Wi-Fi TimeSync
by massel on Thursday January 05, 2017 @08:01PM
(#13333029)
I'm super hopeful this could simply be used in my microwave, stove, car, really anything with a cheap clock in it to sync the time between them to some accurate source, and automatically apply DST.
Re:Wi-Fi TimeSync
by lucaspiller on Friday January 06, 2017 @03:41AM
(#13334799)
Most countries have radio signals that transmit the time (including DST). The issue is there has traditionally been no global standard on how it works - each country/region has their own implementation:
Re:Wi-Fi TimeSync
by jamestnz on Friday January 06, 2017 @05:56AM
(#13335411)
Related: this post [1] from the other week on HN, describing a neat little project to build a low-power radio station which emulates the output of radio station WWVB (a fairly well-known station out of Colorado, which transmits the time signal to large parts of North America).
You could build one of those in case you aren't within range of one of the NIST-operated stations :-)
Re:Wi-Fi TimeSync
by netsharc on Thursday January 05, 2017 @08:47PM
(#13333261)
For home entertainment, if you have a wifi speaker in 1 room, another in another room and they're playing the same music, you'd want them to be playing the same part of the song at the same time, otherwise it's like hearing an echo.
Cars have their own network, although afaik their speakers are nowadays still wired. Maybe for a pimped van with 3 rows of seats and 6 seatback-screens (like on a plane), you'd want to be able to sync the video, if indeed there's a use case for that.
Re:Wi-Fi TimeSync
by Auzy on Friday January 06, 2017 @02:27AM
(#13334547)
Great idea, but I'd say practical applications are limited..
Industrial sensors shouldn't rely on Wifi. Hospitals shouldn't rely on WiFi. In a car just run ethernet alongside power.
Since you can't guarentee wireless maximum latency on WiFi, I still wouldn't use it for multi-channel audio (only multi-room, which NTP is good enough for anyway probably). Especially a problem if you want to sync against Video.
So its a nice idea, but it will probably affect very few people..
Re:Wi-Fi TimeSync
by Auzy on Friday January 06, 2017 @06:54AM
(#13335629)
That still introduces other issues though. You will probably need larger than 200ms to be safe, which will make the setup annoying for applications such as gaming.
Or it would need great error correction. Either way, wifi equipment needs to accept interference (nothing you can do)
Re:Wi-Fi TimeSync
by givinguflac on Friday January 06, 2017 @07:19AM
(#13335731)
Well, considering Sonos has multi channel and multi room capabilities wirelessly, it can work. That said I have no idea how this spec works vs whatever proprietary magic they've got going on.
Re:Wi-Fi TimeSync
by themihai on Thursday January 05, 2017 @07:35PM
(#13332867)
I'm wondering how this compares to tsn (aka audio video bridge[0]). Their conclusion was wifi is not reliable enough for time sensitive applications. Great av networking is not only about clock sync anyway so this looks more like a half baked standard, nevertheless a good step towards lag free av.
Re:Wi-Fi TimeSync
by intopieces on Thursday January 05, 2017 @06:57PM
(#13332656)
Sonos doesn't have the ability to sync audio with video, only audio with audio, correct? We recently acquired a Sonos Playbar and the interplay between HDMI/Optical Out/TV processing made the lip syncing a nightmare. Still not sure it's entirely solved.
Re:Wi-Fi TimeSync
by tjohns on Thursday January 05, 2017 @07:22PM
(#13332784)
Typically, you need to plug in any external speakers (including the Sonos Playbar) to the optical out on your TV itself. This port is intentionally placed at the end of the TV's (latency-inducing) processing chain, and will get you properly synced audio.
If you connect to the optical out on any other devices, you're pretty much guaranteed to have sync problems.
Re:Wi-Fi TimeSync
by themihai on Thursday January 05, 2017 @07:39PM
(#13332878)
I thought sonos can't even do multi channel audio. It's just a kind of mesh network. Wisa was supposed to fix that but for some reasons it seems it failed to get mainstreem
Re:Wi-Fi TimeSync
by wyager on Thursday January 05, 2017 @07:56PM
(#13332988)
No, you can have multiple speakers synced together with Sonos. It works very well; I've never noticed any drift. As I recall, this is why Sonos devices can't just run off a home wifi network and require a bridge.
Re:Wi-Fi TimeSync
by themihai on Thursday January 05, 2017 @08:06PM
(#13333057)
Ok, but can you play multi-channel? Like a 5.1 system in a home theater ? As far as I know it's not possible. Multiple speakers playing the same content is not really multi channel.
Re:Wi-Fi TimeSync
by rblatz on Thursday January 05, 2017 @08:30PM
(#13333189)
Play bar gives you the front 3, you can set up a pair of 1s as your rear left/right and then the sonos sub gives you the .1. So they do support 5.1 right now.
Re:Wi-Fi TimeSync
by themihai on Friday January 06, 2017 @05:26AM
(#13335278)
That's right but in my defence that's really a 3.1 system as you have lf, rf and center in a single speaker. It's also worth to note that lf, rf and center speakers are the most demanding/used channels so IMHO the problems were avoided not fixed. Putting all your channels into a single speaker is not really what I thought when I heard of wireless multi-channel audio.
I also don't know what resolution they use because it's not mentioned in their specs but something tells me it's not 24 bit at least not for the separate speakers.
I've tried multichannel wifi audio but it just doesn't work either due the buffering or the sync issues. I ended up with some proprietary technology with multiple antennas based on the 5GHz band but you need clear line of sight and that's not always convenient. Anything obstructing the line of sight may make your speaker fail to play.
To sum it up: it's true that sonos has a 5.1 system but that's really a half backed solution. It's actually a 3.1 configuration. This may work for some people just like bluetooth speakers work for so many. Can they play in a real/native 5.1 configuration(6 separate speakers)? that's hard to say. What about real 7.1 or the latest configurations such Atmos/DTS:X ( 5.1.4 or 7.1.4)? That's impossible without hardware changes.
Some would say that even standard ethernet is not good enough for multi channel audio(thus avb[0] or [1]powerlink) so I can't really see how standard wifi could work.
Re:Wi-Fi TimeSync
by themihai on Thursday January 05, 2017 @07:53PM
(#13332964)
Airplay works on top of wifi and it can't play multichannel audio. Not to mention the crappy experience when the video is "buffering". Hopefully this standard will fix such issues but I have big doubts.
Re:Wi-Fi TimeSync
by thebradbain on Friday January 06, 2017 @03:00AM
(#13334649)
I thought this too until recently, but Airplay does, in fact, support multichannel audio in sync–but only through playing music to speakers through iTunes Desktop [1], as its the only client to officially implement it. Of course, we don't see more multichannel Airplay clients because it is my understanding the standard is proprietary...
Re:Wi-Fi TimeSync
by themihai on Friday January 06, 2017 @04:43AM
(#13335037)
Is there ANY multi channel client? I tell you: no! And it can't really be because Apple specifically limits AirPlay output to one single destination. It's because wifi sucks and as it is and it just can't work on multi channel(things will get out of sync, some channels will buffer while others will play etc). If you read the avb specs you will underatand why. Wifi needs hw changes.
In further thinking about the idea, once the wifi devices are time synced like this, you can also begin to use that signal for localization in addition to the traditional optical or electromagnetic tracking. Fun!
Ultra-Wideband devices can get this synchronization though, and can be used for localization.
I would guess that what was meant was using two (or more) frequencies at the same time would produce harmonics that reinforce and cancel the combined signal at set distances from the source that can be used to get distance info, and if you can get distance to three different points, you get a 3D location[0]. The technique dates back to WWII.
Further, I think it works best if the frequencies are each a different prime (otherwise you get many beats). There are probably additional tricks you can do by varying the precise frequency combination to extract very fine-grained location data.
[0] Technically, you get two solutions, one on each side of the plane connecting the three points, but they can be disambiguated as long as direction can at least crudely be determined within 180°.
I imagine that they use a system which is not too different to the way GPS combines the signals from multiple satellites to calculate the receiver location.
When you receive have a receive lock against multiple receivers, the spreading code allows you to determine time of flight to the nearest carrier cycle, and the carrier phase can provide even more precise timing. See also: https://en.wikipedia.org/wiki/Multilateration
You can run an NTP instance on your own, of course, and point clients at it via DHCP options but I thought something like that would be kinda handy for easily keeping time synchronized across all one's devices.
That doesn't really fit this use case, of course, but it reminded me of it. With more and more "home devices" being network-enabled, something like that would be extremely useful (and could put to an end "12 o'clock flashers").
Digging into the internals of a few "high end" consumer modem/routers, I wouldn't trust any manufacturer to provide a secure ntpd, so we'd probably just end up with NTP amplification attacks [2] on a Mirai scale.
1: https://www.lightbluetouchpaper.org/2006/04/07/when-firmware...
2: https://blog.cloudflare.com/technical-details-behind-a-400gb...
Software (something like the OSS ntpd at least) is free, parts on a board, physical board size, routing etc. not so much.
I'm not sure why, but somehow it feels like walking into the lion's den if a page has that many occurrences of that word.
Notably used by the Wii U: https://patchwork.kernel.org/patch/5865651/
[0] http://web.cse.ohio-state.edu/~lai/788-Au03/2-scalibility.pd...
Meh. Still cool, but a far cry from the sub-MICROsecond accuracy the page suggest, which would indeed be quite revolutionary.
What are "optimum results?"
https://en.m.wikipedia.org/wiki/Radio_clock
You could build one of those in case you aren't within range of one of the NIST-operated stations :-)
[1] https://news.ycombinator.com/item?id=13258631
Cars have their own network, although afaik their speakers are nowadays still wired. Maybe for a pimped van with 3 rows of seats and 6 seatback-screens (like on a plane), you'd want to be able to sync the video, if indeed there's a use case for that.
Industrial sensors shouldn't rely on Wifi. Hospitals shouldn't rely on WiFi. In a car just run ethernet alongside power.
Since you can't guarentee wireless maximum latency on WiFi, I still wouldn't use it for multi-channel audio (only multi-room, which NTP is good enough for anyway probably). Especially a problem if you want to sync against Video.
So its a nice idea, but it will probably affect very few people..
Or it would need great error correction. Either way, wifi equipment needs to accept interference (nothing you can do)
[0] https://en.m.wikipedia.org/wiki/Audio_Video_Bridging
If you connect to the optical out on any other devices, you're pretty much guaranteed to have sync problems.
http://www.techhive.com/article/2601036/sonos-speakers-now-r...
http://www.sonos.com/en-us/shop/wireless-5-1-surround-sound-...
[0] https://en.wikipedia.org/wiki/Audio_Video_Bridging
[1] https://en.wikipedia.org/wiki/Ethernet_Powerlink
[1] https://support.apple.com/kb/PH19497?locale=en_US
https://en.m.wikipedia.org/wiki/Audio_Video_Bridging