News for hackers. Stuff that matters.
Re:Wi-Fi TimeSync by johnm1019 on Thursday January 05, 2017 @04:55PM (#13331780)
This is huge news to me. Standardized microsecond level wireless time sync available on cheap commodity hardware. We could've used this at the startup I was at 4 years ago. I see lots of uses in the AR space, along with device tracking algorithms.
Re:Wi-Fi TimeSync by johnhenry on Thursday January 05, 2017 @05:27PM (#13332029)
Not entirely relevant, but I'm curious about that startup... is it still around? Did the company ever find a way around the need for this?
Re:Wi-Fi TimeSync by johnm1019 on Thursday January 05, 2017 @06:07PM (#13332324)
Hah yes we did. Wires. Of course everyone wants wireless though and while it would've improved the overall experience I'm not sure it would've saved the company. Other market factors were making more of a problem than just delivering good tech :/

In further thinking about the idea, once the wifi devices are time synced like this, you can also begin to use that signal for localization in addition to the traditional optical or electromagnetic tracking. Fun!

Re:Wi-Fi TimeSync by kbaker on Thursday January 05, 2017 @06:56PM (#13332647)
You need better sync than ~1 microsecond to do time-of-arrival localization for Wi-Fi style signals, though... since RF waves travel at around 1 ft per nanosecond.

Ultra-Wideband devices can get this synchronization though, and can be used for localization.

Re:Wi-Fi TimeSync by sargun on Friday January 06, 2017 @12:11AM (#13334130)
How can you use UWB for this? Doppler?
Re:Wi-Fi TimeSync by webmaven on Friday January 06, 2017 @08:03AM (#13335934)
The Doppler effect would only help with a moving source or target, so probably not.

I would guess that what was meant was using two (or more) frequencies at the same time would produce harmonics that reinforce and cancel the combined signal at set distances from the source that can be used to get distance info, and if you can get distance to three different points, you get a 3D location[0]. The technique dates back to WWII.

Further, I think it works best if the frequencies are each a different prime (otherwise you get many beats). There are probably additional tricks you can do by varying the precise frequency combination to extract very fine-grained location data.

[0] Technically, you get two solutions, one on each side of the plane connecting the three points, but they can be disambiguated as long as direction can at least crudely be determined within 180°.

Re:Wi-Fi TimeSync by jburgess777 on Friday January 06, 2017 @05:50PM (#13341042)
DecaWave sell UWB modules that perform real-time location to ~10cm in a controlled environment: http://www.decawave.com/

I imagine that they use a system which is not too different to the way GPS combines the signals from multiple satellites to calculate the receiver location.

When you receive have a receive lock against multiple receivers, the spreading code allows you to determine time of flight to the nearest carrier cycle, and the carrier phase can provide even more precise timing. See also: https://en.wikipedia.org/wiki/Multilateration