Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by agumonkey on Tuesday January 26, 2016 @07:01AM
(#10972975)
There was a news about metal sintering used for an actual market (sorry, memory failing). That reminded me of this video and got me wondering how complicated it was to control the beam focus and energy. To allow for finer and leaner shapes.
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by VLM on Tuesday January 26, 2016 @08:52AM
(#10973346)
Sintered metal bushings soaked with oil. Chrysler invented them around 1930. Trademarked name is "oilite". A very popular product for many decades, probably some in your car or house today. It really blows some peoples minds when what looks like a block of solid bronze soaks up to maybe a fifth its volume of oil. For something thats 20% hollow its also remarkably strong.
Its an example of a piece of technology that depends on numerous contemporary things. You need razor sharp cutting tools to keep the pores open, so it has to be a "post-carbide" era tool. You need a vacuum pump to fill the pores with oil. You need modern non-drying low acidity mineral oils because something like veg oil or whale oil would break down both the bearing and the shaft in a couple years. The powder is heated precisely and under some pressure, a lot more precise than a blacksmiths shop.
Speaking of pressure, reproducible and reliable sintering seems to always require some amount of pressure, which is a problem for 3-d printing, either you're using somewhat exotic process, or the product needed pressure so it is going to be weak.
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by fudged71 on Tuesday January 26, 2016 @12:47PM
(#10974680)
I wonder if a solar sintering machine could be made nearly as precise as an SLS machine. Maybe if you could focus the beam into a fibre optic cable and measure the intensity of light to control the path planning.
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by hidroto on Tuesday January 26, 2016 @07:27AM
(#10973060)
i can think of a few obvious improvements but the first thing i would add would be a shutter.when he was setting it up i was worried he would burn his back or something in the beam.
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by ChuckMcM on Tuesday January 26, 2016 @12:55PM
(#10974735)
This is an older article, but still interesting. I used my scavenged fresnel lens from an old projection TV to try and melt sand. It works (kind of) but control is a challenge.
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by wiz21 on Tuesday January 26, 2016 @06:40AM
(#10972908)
The only point this raises is : are they serious ? This looks quite akin to the Solar Impulse project. It makes us dream of something that looks like a very bad way to treat the actual problem.
This guy's energy would be better spend at tackling the economical and political problems we have to solve to actually improve the situation... And we need more than a dream...
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by Zikes on Tuesday January 26, 2016 @06:54AM
(#10972951)
He's an engineer, not a politician. You don't get to vote on what he works on or decide what is important to him.
Sintering is an emerging 3D printing tech now that the patent has expired. We can't predict what all the potential applications are or what impact it will have on society.
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by matthewmacleod on Tuesday January 26, 2016 @08:38AM
(#10973300)
That's not really an inference you can make. In this case, that's happened – but there are plenty of recent, popular technologies that are also patented. Look at any modern smartphone, for example!
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by 50CNT on Tuesday January 26, 2016 @09:31AM
(#10973510)
Yeah, but it does seem like interesting tech that was kept under wraps gets a comeback tour once patent protections run out.
Consumer 3D printing is an interesting case, because the wealth of extrusion deposition products came after the patents ran out. Same thing now with interesting developments in SLS. Patent runs out, some enthusiasts rig up their own, exchange knowledge over the web, and turn industrial technology into open hardware products.
I think the thing here is that companies owning these patents just never thought about the consumer and hobbyist markets. But their patents prevented people selling and innovating in these spaces, thus letting these markets lie fallow. What happens to markets when the legal monopoly stops selling?
Now consumer electronics is a field where there's a lot of motion. But imagine the Smartphone(tm) was patented, and the owner of the patent decided to do industrial PDAs instead and abandon the consumer market. They still prevent others from selling to the consumer market, even they don't loose anything from that except some vacuous "potential revenue".
Trademarks elapse when they're not used, and names can be used in different markets when there's no chance of confusion (Nissan Motors vs. Nissan Computers). Patents (outside of I think 2 renewal dates) don't quite work that way. The question is, do they prevent technology from jumping into different markets by virtue of their broadness?
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by deckar01 on Tuesday January 26, 2016 @01:28PM
(#10974946)
Smartphones are a really bad example. Those patents created an arms race between a small group of large tech companies. If you try to limp into that market you will get sued from every angle. The only winners are those who make pacts based on mutually assured destruction[0].
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ...
by chillingeffect on Tuesday January 26, 2016 @09:40AM
(#10973549)
Depending on my state of mind, I agree perfectly with you.
Really, the point of things like this is to be a spectacle, to be "wrong" and take no shame in being so AND...
...to create enough of an emotional debacle that it lures people into dreaming of the right way.
So in a way, we've falling directly into his trap. :)
Of course, it can get tedious when projects like this insist they are correct, but at least this guy states specifically below the video "Whilst not providing definitive answers, this experiment aims to provide a point of departure for fresh thinking."
http://www.nasa.gov/centers/goddard/news/topstory/2008/lunar...
https://media.ccc.de/v/32c3-7336-3d_printing_on_the_moon
Here: http://www.markuskayser.com/work/solarsinter/
https://en.wikipedia.org/wiki/Solar_furnace
IMO, this is just cool as an easy to understand 3d printer.
Its an example of a piece of technology that depends on numerous contemporary things. You need razor sharp cutting tools to keep the pores open, so it has to be a "post-carbide" era tool. You need a vacuum pump to fill the pores with oil. You need modern non-drying low acidity mineral oils because something like veg oil or whale oil would break down both the bearing and the shaft in a couple years. The powder is heated precisely and under some pressure, a lot more precise than a blacksmiths shop.
Speaking of pressure, reproducible and reliable sintering seems to always require some amount of pressure, which is a problem for 3-d printing, either you're using somewhat exotic process, or the product needed pressure so it is going to be weak.
This guy's energy would be better spend at tackling the economical and political problems we have to solve to actually improve the situation... And we need more than a dream...
Sintering is an emerging 3D printing tech now that the patent has expired. We can't predict what all the potential applications are or what impact it will have on society.
Consumer 3D printing is an interesting case, because the wealth of extrusion deposition products came after the patents ran out. Same thing now with interesting developments in SLS. Patent runs out, some enthusiasts rig up their own, exchange knowledge over the web, and turn industrial technology into open hardware products.
I think the thing here is that companies owning these patents just never thought about the consumer and hobbyist markets. But their patents prevented people selling and innovating in these spaces, thus letting these markets lie fallow. What happens to markets when the legal monopoly stops selling?
Now consumer electronics is a field where there's a lot of motion. But imagine the Smartphone(tm) was patented, and the owner of the patent decided to do industrial PDAs instead and abandon the consumer market. They still prevent others from selling to the consumer market, even they don't loose anything from that except some vacuous "potential revenue".
Trademarks elapse when they're not used, and names can be used in different markets when there's no chance of confusion (Nissan Motors vs. Nissan Computers). Patents (outside of I think 2 renewal dates) don't quite work that way. The question is, do they prevent technology from jumping into different markets by virtue of their broadness?
[0] https://wikipedia.org/wiki/Smartphone_patent_wars
Really, the point of things like this is to be a spectacle, to be "wrong" and take no shame in being so AND...
...to create enough of an emotional debacle that it lures people into dreaming of the right way.
So in a way, we've falling directly into his trap. :)
Of course, it can get tedious when projects like this insist they are correct, but at least this guy states specifically below the video "Whilst not providing definitive answers, this experiment aims to provide a point of departure for fresh thinking."