News for hackers. Stuff that matters.
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ... by agumonkey on Tuesday January 26, 2016 @07:01AM (#10972975)
There was a news about metal sintering used for an actual market (sorry, memory failing). That reminded me of this video and got me wondering how complicated it was to control the beam focus and energy. To allow for finer and leaner shapes.
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ... by VLM on Tuesday January 26, 2016 @08:52AM (#10973346)
Sintered metal bushings soaked with oil. Chrysler invented them around 1930. Trademarked name is "oilite". A very popular product for many decades, probably some in your car or house today. It really blows some peoples minds when what looks like a block of solid bronze soaks up to maybe a fifth its volume of oil. For something thats 20% hollow its also remarkably strong.

Its an example of a piece of technology that depends on numerous contemporary things. You need razor sharp cutting tools to keep the pores open, so it has to be a "post-carbide" era tool. You need a vacuum pump to fill the pores with oil. You need modern non-drying low acidity mineral oils because something like veg oil or whale oil would break down both the bearing and the shaft in a couple years. The powder is heated precisely and under some pressure, a lot more precise than a blacksmiths shop.

Speaking of pressure, reproducible and reliable sintering seems to always require some amount of pressure, which is a problem for 3-d printing, either you're using somewhat exotic process, or the product needed pressure so it is going to be weak.

Re:Solar Sinter: Solar-powered 3D printer that sinters sand ... by phunge on Tuesday January 26, 2016 @11:55AM (#10974336)
You're probably thinking of https://en.m.wikipedia.org/wiki/Selective_laser_sintering which is pretty widespread -- for example you can order metal parts straight off ShapeWays that are SLS!
Re:Solar Sinter: Solar-powered 3D printer that sinters sand ... by fudged71 on Tuesday January 26, 2016 @12:47PM (#10974680)
I wonder if a solar sintering machine could be made nearly as precise as an SLS machine. Maybe if you could focus the beam into a fibre optic cable and measure the intensity of light to control the path planning.