News for hackers. Stuff that matters.
Re:US DoD starts using 11.0.0.0/8 by endymi0n on Tuesday August 04, 2015 @06:41PM (#10006753)
Bad news for some ISPs, VPN setups and sysadmins I know who used these addresses as quasi private IPs (extension of 10.x.x.x), as these were all unused before...
Re:US DoD starts using 11.0.0.0/8 by gnoway on Tuesday August 04, 2015 @08:49PM (#10007404)
Kind of serves them right, if so. That's the kind of thoughtless violation of standards that should get used as a classroom example of what not to do.
Re:US DoD starts using 11.0.0.0/8 by bg1q6lytelv on Wednesday August 05, 2015 @04:15AM (#10008493)
It's more than a little ironic to be admonishing someone for something so hackish on a website called "hacker news."
Re:US DoD starts using 11.0.0.0/8 by jlgaddis on Tuesday August 04, 2015 @11:31PM (#10007907)
Yep, this is why I occasionally use reserved addresses other than the widely used RFC 1918 addresses.

I use 192.0.2/24 ("TEST-NET") at home (cf. RFC 5737), split up into various subnets. At $work (ISP), we use 100.64/10 (cf. RFC 6598) quite a bit internally (for its intended purpose, *mostly). In other networks, such as companies with many locations that will be connected via VPNs or companies that will have several VPNs to other organizations (where there's less control of the addresses used), I've used 198.18/15 (cf. RFC 2544) to avoid any conflicts.

Obviously, this is not what those address ranges are intended to be used for but it's certainly better than both a) using non-reserved address ranges (i.e. public ones that don't belong to you) and b) implementing funky NAT policies because of overlapping addresses.

Re:US DoD starts using 11.0.0.0/8 by SEJeff on Tuesday August 04, 2015 @06:42PM (#10006759)
I've seen a company that uses 7.0.0.0/8 as "lucky number seven" since it is reserved for the DoD as well.
Re:US DoD starts using 11.0.0.0/8 by Thaxll on Tuesday August 04, 2015 @07:19PM (#10006966)
What kind of company need more than 16M IPs for private adressing?
Re:US DoD starts using 11.0.0.0/8 by api on Tuesday August 04, 2015 @07:30PM (#10007030)
It's not just about number of addresses. It's also about preventing conflicts.

Let's say my company uses 10.0.0.0/16. Now let's say I set up a VPN. Half my users will be on local networks that are also 10.0.x.x. Fail.

Even worse, let's say my company has two locations and both use 10.0.0.x and now we want to link them on a common network using a VPN or virtual Ethernet bridge. Have fun renumbering one of these two sites, or setting up abominations like internal two-way SNAT/DNAT.

The reason IPv6's address space is so huge is to allow relatively stateless assignment of addresses with extremely low probability of conflicts. An IPv6 address is basically a UUID. That's going to make lots of things easier and eliminate the need for a huge number of nasty hacks.

Re:US DoD starts using 11.0.0.0/8 by rbritton on Tuesday August 04, 2015 @08:22PM (#10007306)
This was actually tech support call #1 at a hotel I worked at previously. We were only able to fully resolve it by using an obscure section of the 172.16.0.0/12 range -- almost all companies use the other two private ranges.
Re:US DoD starts using 11.0.0.0/8 by peckrob on Tuesday August 04, 2015 @09:37PM (#10007583)
>. We were only able to fully resolve it by using an obscure section of the 172.16.0.0/12 range.

This is exactly why I use 172.16.104.0/21 as my home network range. Almost no one else does so it makes things really easy when I VPN home from a hotel somewhere.

Re:US DoD starts using 11.0.0.0/8 by jlgaddis on Tuesday August 04, 2015 @11:35PM (#10007914)
Unfortunately, I've been in more than one hotel (or other location with open/public access to the network) where the implementers decided to just use either the whole 10/8 network, a /16 (or more!) out of the 172.16/12 network, or the whole 192.168/16 network in one big, flat network. That can be a real PITA and annoys me to no end.
Re:US DoD starts using 11.0.0.0/8 by gonzo on Tuesday August 04, 2015 @10:19PM (#10007704)
you are... not alone.
Re:US DoD starts using 11.0.0.0/8 by llama052 on Tuesday August 04, 2015 @10:28PM (#10007728)
So two way SNAT/DNAT is nastier than using a public IP block that you don't own? Pretty bad practice if you ask me. At the very most you should use a block that you own. Also I've never had any issues setting up IPSEC VPNs or Tunnels with two way NAT, if you have your configuration setup correctly.
Re:US DoD starts using 11.0.0.0/8 by developer1 on Tuesday August 04, 2015 @10:30PM (#10007733)
"An IPv6 address is basically a UUID."

This is the reason why I can't believe we're not all on IPv6 yet. You would think that the online advertising industry would have done everything in their power to push IPv6, at any cost. 90%+ of people on IPv6 will literally have a unique identifier FOR LIFE on every device they own. Marketers can now pinpoint down not just to an IP address that identifies a single NAT interface, but each individual device.

I hope that operating systems and/or routers will provide the option to rotate each IPv6 address on a routine basis. It would also be nice if ISPs would rotate the block that is handed out to each customer, but this is unlikely to happen. Every phone, every tablet, every PC, every thermostat, every door lock, every fridge... uniquely identifiable from the day it is hooked up to a network. :(

Re:US DoD starts using 11.0.0.0/8 by jlgaddis on Tuesday August 04, 2015 @11:12PM (#10007846)
> I hope that operating systems and/or routers will provide the option to rotate each IPv6 address on a routine basis.

This is an issue when using SLAAC, yes, but a workaround ("Privacy Extensions") were developed years ago; cf. RFC4941 [0].

You can also assign static addresses or use DHCPv6 -- on your own networks, at least; you obviously can't control how your ISP decides to issue addresses.

[0]: https://tools.ietf.org/html/rfc4941

Re:US DoD starts using 11.0.0.0/8 by mjcl on Tuesday August 04, 2015 @10:56PM (#10007804)
Good news, privacy addressing (ex. RFC 4941) exists and is enabled by default on OS X (10.7+) and Windows 7. Privacy addressing rotates the host section of the IP address by default once a day, leaving IPv6 host detection similar to IPv4+NAT.

It seems like Linux may be a mixed bag (by distro) w/r/t it being enabled as default. I could definitely see cheap embedded devices based on a current Linux distro not bothering to change defaults to enable it.

Re:US DoD starts using 11.0.0.0/8 by jlgaddis on Tuesday August 04, 2015 @10:46PM (#10007783)
Related: "Why the FBI wants IPv6: It's better [than CGN] for tracking criminals" [0].

[0]: http://gcn.com/articles/2012/06/07/fbi-wants-ipv6-hard-to-tr...

Re:US DoD starts using 11.0.0.0/8 by api on Wednesday August 05, 2015 @12:22AM (#10008007)
There are already so many ways to fingerprint a browser, it's really not something they need.
Re:US DoD starts using 11.0.0.0/8 by wmf on Tuesday August 04, 2015 @07:20PM (#10006972)
A company with more than 16M cable modems, for one thing.
Re:US DoD starts using 11.0.0.0/8 by tedunangst on Tuesday August 04, 2015 @07:31PM (#10007040)
But do they all need to be on the same logical network?
Re:US DoD starts using 11.0.0.0/8 by mburns on Tuesday August 04, 2015 @07:46PM (#10007122)
They need to be logically accessible because they are managed devices. NAT doesn't work in this case. Of course, IPv6 is the more correct solution, if you can manage it (no pun intended).

See Comcast's presentation about their motivations: http://meetings.ripe.net/ripe-54/presentations/IPv6_manageme...

Re:US DoD starts using 11.0.0.0/8 by tedunangst on Tuesday August 04, 2015 @08:10PM (#10007248)
Thanks, that's interesting, but doesn't explain why "federated net 10 islands" can't work, except to say it can't. New York (time warner) and Chicago (Comcast) are obviously managed separately. Why can't Comcast manage Boston and Chicago as separate networks? Is every single customer nationwide working off the same dhcp/update/management server, etc.?
Re:US DoD starts using 11.0.0.0/8 by wtallis on Tuesday August 04, 2015 @09:30PM (#10007567)
Based on the kinds of multi-state outages they suffer from, I'd say they often are all having all modems hitting the same auth/DHCP/DNS servers. Back when I was on BellSouth DSL, every time they had a DNS outage everybody would reboot their modem and that would bring down the DHCP server, but if you used third-party DNS you could remain online while the entire SE US lost DSL for an hour or two.
Re:US DoD starts using 11.0.0.0/8 by jlgaddis on Tuesday August 04, 2015 @11:15PM (#10007854)
If memory serves, T-Mobile was using 5/8 internally for a long time (because they exhausted 10/8). I imagine they had a lot of fun renumbering out of that once netblocks began to be issued out of it.
Re:US DoD starts using 11.0.0.0/8 by dlitz on Wednesday August 05, 2015 @04:44AM (#10008572)
I'm not sure of the timing, but today T-Mobile provides IPv6 and 464XLAT.