News for hackers. Stuff that matters.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by gnarbarian on Tuesday December 30, 2014 @05:30AM (#8814014)
This is what happens when function plays second fiddle to form.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by hmottestad on Tuesday December 30, 2014 @05:49AM (#8814057)
Apple moved from PowerPC to Intel because the new generation of PowerPC chips wouldn't run cool enough to put in a laptop.

Intel had long been pushing for cooler chips and longer battery life. Beginning with its Centrino line and the Pentium M processor.

Apple hopped in right after the Core chips landed (dual core), and these chips were amazing for Apple. They could continue with the macbook pro design with a new and faster chip.

Then Intel went on a speed binge again and tried to yield the most bang for your buck, sacrificing thermals and battery life.

Now finally with the Haswell chips they took a step back and tried to improve battery and thermals. And hopefully Broadwell will be even better.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by 72deluxe on Tuesday December 30, 2014 @04:44PM (#8816905)
Were Ivy Bridge considered to be OK? I have a 2012 MBP with the top IvyBridge i7 and it gets warm if you play games (in Windows) but I hardly ever hear the fan any other time (I compile C++ on it all the time). I just thought I'd ask as the "dead MacBook" stories frighten me.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by gnarbarian on Tuesday December 30, 2014 @05:52AM (#8814073)
So why didn't apple adapt their cases to fit the new thermal profile by placing a couple ghastly holes where they were needed?
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by hmottestad on Tuesday December 30, 2014 @07:16AM (#8814262)
They did. The retina macbook pro has vents on the sides.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by gnarbarian on Tuesday December 30, 2014 @07:51AM (#8814355)
Not in time for the OP it would seem.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by niels_olson on Tuesday December 30, 2014 @06:40PM (#8817411)
I don't think he got the retina MacBook. I got the retina macbook and have never had heat issues or noise issues, the fans are super quiet. That said, I'm on my second battery-upper shell combo, and my third screen-hinge combo, so take it for what it's worth.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by serf on Tuesday December 30, 2014 @07:07PM (#8817543)
>third screen-hinge combo yeah, but in all fairness I haven't found a modern laptop that does that right outside of convertible tablets that are notoriously beefed up in that regard.

even Lenovo hinges suck now.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by techrat on Tuesday December 30, 2014 @05:39AM (#8814029)
You'd think after 10 years having model after model of aluminium built laptops, Apple would have found a way to solve the heat issues they always have... but nope, they still think it's a good idea to put the heat exhaust vent right up against the bottom lip of the screen where it is still blocked when the machine is in use.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by chroma on Tuesday December 30, 2014 @05:50AM (#8814059)
Where else can one put air vents on a laptop? The sides are taken up by expansion ports and speakers. The front is blocked by the battery. The bottom is often obstructed by blankets, clothing, etc. The top is for the keyboard, trackpad, and palm rest.

Putting vents at the hinge actually makes the most sense. It guarantees ventilation ports won't be fully obstructed. The vents face away from the user, reducing fan noise. Air ducts are short, since that area is close to the CPU/GPU.

It's hard to cool a laptop that can generate 85 watts of heat. Moreso if one cares about it looking nice and being thin. You may not like the trade-offs Apple chooses, but they put a lot of thought into their industrial design.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by STRML on Tuesday December 30, 2014 @10:41AM (#8814983)
The thinness is the critical problem, and to be honest with most consumer electronics (phones especially; please give me a larger, replaceable battery), I wish they would stop the race to the bottom and instead deliver more functional and longer-lasting productions.

I have an rMBP 15" and a 15" Lenovo Y500. The Y500 cost less than half of the rMBP for equivalent performance but the experience, battery, screen, trackpad, etc are of course much better on the Mac. But for intensive tasks, even with nearly identical internals and the same OS, the Y500 is far more pleasant to use. Say what you want about Lenovo and the terrible things they've done to their laptops in the last few years, but the Y500 is designed to expel heat in the least obtrusive manner possible and it does an amazing job.

At full bore, all cores, maybe a game, the Y500 happily pushes a lot of air out the side vent, and the keyboard, trackpad, bezels, etc., stay very cool.

With the same workload, the rMBP gets very, very hot and seems to blow a small amount of air out of the keyboard (?), occasionally burning my fingers, It's loud and very uncomfortable to use.

In a sense it definitely makes me feel like I overpaid for the extra speed, since I can't use it comfortably anyway.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by mike-cardwell on Tuesday December 30, 2014 @06:18AM (#8814143)
My Thinkpad has air vents on the left hand side, and also on the back. Except, the ones on the back aren't blocked like they are on Macbooks, because the Thinkpads design is based on what is sensible rather than on what will make the thinnest possible computer.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by Kurtz79 on Tuesday December 30, 2014 @06:36AM (#8814175)
I don't know what model you have, but my old T61p with dedicated graphics had the same heating issues as my newer Macbook Pro.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by mike-cardwell on Tuesday December 30, 2014 @07:57AM (#8814375)
A T420 with no heat issues whatsoever.

[edit] Not a great image but you can see where the vents are on the back and the left hand side on this image:

https://t3.gstatic.com/images?q=tbn:ANd9GcSpIDoMt_OkYzjIF9E6...

Doesn't matter how far I fold the screen back, the vents aren't blocked by it.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by Kurtz79 on Tuesday December 30, 2014 @08:32AM (#8814491)
From this review ( http://www.cnet.com/products/lenovo-thinkpad-t420/ ):

"Thick and bulky, with a keyboard studded with enough auxiliary buttons to look like a space shuttle control panel, the T420 is as old-school as a laptop can be."

I mean, it's all a matter of trade-offs, as the parent says. Personally I have been using my Macbook mostly as a desktop replacement, so in hindsight I would probably trade the small form factor for better cooling and more sustained performance, for people using a laptop more "dynamically" (carrying it around daily), I can see mobility to come first.

EDIT: Have you ever owned an ultrabook or a netbook ? I went from a T61p to a Macbook Air the the increase in mobility was significant. I used it on bed, on the couch, on the train, with no discomfort at all even after hours on end, unlike the bulkier laptops I owned before.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by mike-cardwell on Tuesday December 30, 2014 @08:41AM (#8814533)
I don't get this recent idea that a laptop needs to be as thin and light as an envelope to be "mobile". I have as much "mobility" with this Thinkpad as someone with a Macbook air. Next you'll be telling me I'm sacrificing mobility with my phone because it's twice as thick as an iPhone 6. This argument seems like it would only come from somebody who has sacrificed usability for thinness and needs to come up with a way to justify it. Does a Macbook have "increased mobility" over thicker laptops? I severely doubt it.

The Thinkpad may have more buttons than a Macbook, but I've never seen this as a disadvantage... The Thinkpad keyboard is much nicer to use than the Macbook keyboard. I've owned both. I'll admit that the Macbook keyboard looks nicer though. But that's the point isn't it. Macs are for people who care what their computers look like more than how useful they are.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by proveanegative on Tuesday December 30, 2014 @09:00AM (#8814589)
>I don't get this recent idea that a laptop needs to be as thin and light as an envelope to be "mobile".

Weight is hardly a big differentiator for MacBook Pros, as I understand it. The difference in weight between the ThinkPad T420, which the grandparent mentions, and the latest 15" MacBook Pro isn't that great: they weigh 4.9 lb (2.24 kg) and 4.5 pounds (2.06 kg) respectively according to the official specs. I suppose the ThinkPad will have a slightly heavier power adapter as well.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by mike-cardwell on Tuesday December 30, 2014 @09:15AM (#8814632)
Exactly, this idea that Apple have sacrificed things like useful ports and useful heat vents, for mobility, it's just flat out wrong. They have sacrificed those things yes, but not for mobility, for looking pretty.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by egypturnash on Tuesday December 30, 2014 @06:30PM (#8817359)
As someone who's gone from boxy laptops to an Air... yes, there is a difference in "mobility". I take my Air out to a cafe or a park or whatever to get work done a LOT more than I took my old Powerbooks.

Heavier computers are something I had to make a decision to go out with. I knew I would be lugging it around on my shoulder and feeling grumpy. But the Air? It, plus a Wacom tablet next to it, takes up less room than the hardback sketchbooks I used to haul around as a matter of course. And I can sit out under a tree on a nice day and do finished, full-color art with a lot less mass than hauling a paint box around. (The fact that a full charge lasts most of a day helps a lot, too. I only take the power brick when I'm going out of town.)

Now, I will admit that I do also care about how stuff looks. I'm an artist; it's my job. But my experience is that there is something really, really different about having a laptop that does everything you need, and weighs less than a hardbound book.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by threeseed on Tuesday December 30, 2014 @12:20PM (#8815530)
Taking your point to the next logical conclusion you would be okay taking a desktop computer with twin monitors instead of s MacBook Air.

I mean be serious. Thinness and weight are critical to a non insignificant group of people. They could be people like myself who have to take his laptop to/fro work slongside gym wear and s number of books. I couldn't physically csrry s heavier laptop.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by soperj on Tuesday December 30, 2014 @01:01PM (#8815738)
Weight may be, but thinness isn't. My X230 thinkpad is the same weight as a macbook air, but thicker. More ports, better cooling, and infinitely easier to do replace/alter anything to do with the machine.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by derekp7 on Tuesday December 30, 2014 @03:01PM (#8816406)
I haven't had any of the ultra thin ultrabooks. I do have a netbook (slightly older Acer model), but the screen was too limiting on it. So now I use a Thinkpad X230. The differences between the X230 and my work laptop (HP Elitebook 8470) is night and day -- I have no problem carying the X230, but wouldn't dream of lugging around the 8470.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by pwnna on Tuesday December 30, 2014 @10:57AM (#8815061)
How did you get your T420 to have no heating issues? What processor/GPU combo do you have?

I have a T420 and have major heating issues with it playing games. I've tried everything: thinkpad fan control that turns the fan up to 7000RPM, clearing everything out with compressed air, replacing the thermal paste..

After a few years of observations, I think the problem may lie in software.. It seems like when I'm playing games and what not my CPU gets turboboosted, which stays there until it reaches about 90C, when it gets severely throttled, killing framerate and all. I use linux, so right now I have several scripts that goes and disables turbo boost. However, even at that point, it still will boost the CPU when running certain GL applications... Not sure why.

In fact, I've noticed this issue on all Sandybridge laptops I own/have encountered: the 2011 MBP, a dell inspiron... Ivy bridge computers seems to have no issue with this (W530, 2012 MBP).

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by freehunter on Tuesday December 30, 2014 @12:38PM (#8815636)
My wife uses my older T420 with a dual core i7 and an nvidia workstation GPU of some sort as a Sims 3/4 machine with Windows 8 and never has heat issues. I'm currently using a W530 with Red Hat 6 for work and it gets hot occasionally but never enough to feel more than mildly uncomfortable to the touch and certainly never enough to cause any short term problems. Granted, I only ever use it for running a few VMs, not for any games.

I wonder how many of these Macbook issues stem from popularity. If you look at any vendor's forums, you will find a bunch of posts about issues that a lot of people are having. They never make news, though, because how many people own an HP 5370-2wt20 laptop? A lot of people own HP laptops, but they don't have one model that makes up a large percentage of the laptop market. Macs, on the other hand, have a single (ish) model that makes up a large percentage of the laptop market. If there is an issue that affects 1% of HP 8209-c50mg buyers versus 1% of Macbook Pro buyers, only the Macbook numbers will be large enough to make news.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by wcfields on Tuesday December 30, 2014 @03:37PM (#8816602)
I've wondered that too about other manufactures defects, that they probably suffer the same flaws with the bad ball solder on the GPUs but they didn't sell the same numbers as a MBP so it goes unnoticed.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by 72deluxe on Tuesday December 30, 2014 @04:46PM (#8816910)
Not real Red Hat 6 though right? I used 6.2 all those years ago.

Do you mean RHEL 6? :-)

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by freehunter on Tuesday December 30, 2014 @10:06PM (#8818079)
Yup. Sorry, I have a tendency to use Red Hat and RHEL interchangeably.

Red Hat Enterprise Linux Workstation release 6.5 (Santiago).

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by mike-cardwell on Tuesday December 30, 2014 @01:42PM (#8815953)
I skipped the Nvidia option and use the onboard Intel graphics, because I don't play games on laptops. All laptops get hot when used for gaming. I have a separate desktop for gaming.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by ethbro on Tuesday December 30, 2014 @12:32PM (#8815603)
> I have a T420 and have major heating issues with it playing games.

In my experience, almost no consumer laptop is designed with a gaming thermal load in mind (aka heavy cpu + max gpu for extended periods of time). I'm not even sure it's possible in a conventional laptop case.

... I know this is completely useless advice, but don't do heavy gaming on a laptop without expecting problems. There are other form factors much better thermally suited.

tl;dr: mobility/thermal-tolerance/performance, pick two

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by pwnna on Tuesday December 30, 2014 @02:22PM (#8816183)
One thing is that the T420 is not sold as a consumer laptop. Under Windows, running AutoCAD/SolidWorks will drive temperature of 90+ degrees. This laptop is suppose to be for those kind of work. Furthermore, I'm not even running heavy games. I'm running things like FTL, or older 3D games like RollerCoaster Tycoon 3, or even sometimes just watching YouTube videos at 1080p.

Regardless, thermal performance under heavy load in laptop should either be tolerated, or the manufacturers should disable higher clock speeds.

My W530 on the other hand has no issue with heat. Heavy gaming puts it to about 75-80C. It is also much bulkier in size.

Edit: my dedicated graphics is off most of the time. Even then, CPU alone can drive the temperature up through the roof.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by ethbro on Tuesday January 06, 2015 @01:16PM (#8845997)
I always thought it was odd no one made an external heatsink for laptops.

Apparently at one point (1983) someone thought it was possible: http://papers.sae.org/831101/

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by harmonicon on Tuesday December 30, 2014 @01:19PM (#8815817)
Every heating issue I had with my T420 is solved by opening up the laptop and thoroughly cleaning with compressed air. It will stays good for a few years until the dust gathers up again.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by pwnna on Tuesday December 30, 2014 @02:25PM (#8816195)
Do you have numbers on what your computer's temperature is at when it's idling and when it's on full load (CPU maxed out)? At idle I'm coming in at around 52C with ambient temperature at around 20C. Full load I can go to 90C, when the computer will automatically downclock, which is something that's not desirable.

I have opened up my laptop more than once and cleaned all the areas i can, but I still can't seem to get the temperature to go down like others claim. At this point I'm considering replacing my fan assembly and see if I have better luck but haven't gotten around to do so.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by ekianjo on Tuesday December 30, 2014 @07:37AM (#8814313)
My x220 has air vents at the back, on the left side and several at the bottom of its base. Even when it heats up the temperature stays very much controlled.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by 51Cards on Tuesday December 30, 2014 @12:40PM (#8815641)
Perhaps your unit? I have a T61p still in regular use here and it's never had a heat issue?
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by Kurtz79 on Tuesday December 30, 2014 @01:32PM (#8815895)
Have you got dedicated graphics ?

To me the issue was present mostly when gaming, not really during normal use (with the Macbook is the same).

It failed me after a few years and sold it for spares.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by 51Cards on Tuesday December 30, 2014 @01:50PM (#8815995)
I believe it has an Nvidia card in it. While I did game on it awhile ago I haven't for several years now. Possibly I haven't pushed the hardware long enough to cause GPU thermal issues to arise.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by boobsbr on Tuesday December 30, 2014 @09:59AM (#8814815)
My T410 has vents on the bottom and on the left side.

So, when it's on my lap it doesn't get enough airflow and burns my leg.

So much for 'sensible' design.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by marcosdumay on Tuesday December 30, 2014 @08:39AM (#8814522)
Most laptops have the batteries on the back, making the front available for connectors. Most laptops have ventilation on a side, and some complement it with bottom holes.

Also, Apple could place their CPU/GPU wherever they wanted.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by pmarin on Tuesday December 30, 2014 @06:59AM (#8814231)
The original eeepc uses the keyboard as heatsink.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by ddoolin on Tuesday December 30, 2014 @09:51AM (#8814778)
Thanks for pointing this out; I used the original EeePC for a long time but could only remember that I had had a laptop where the heat exhausted through the keyboard, not which model. Interesting but once it really started to kick up, this may not actually be a good option.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by gnarbarian on Tuesday December 30, 2014 @05:57AM (#8814089)
My Latitude E5430 has them on the left side near the back, and two places on the bottom (the rear left side and the front middle).
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by chroma on Tuesday December 30, 2014 @06:14AM (#8814135)
That laptop is twice as thick as a rMBP and puts out less than half as much heat. Even if Apple put vents in those places, it wouldn't cool adequately; the vent area would be half that of the Dell. To get the same temperatures, airflow would have to be 4x faster than in the Dell. And as I said before, vents on the bottom increase the risk of overheating when used on a bed or carpet.

Critics hold Apple to a higher standard than other companies, and the media reports Apple's failings more than other companies. There are tons of examples: iPhone 6 bending (it's just as sturdy as other phones), solder separation issues (rare; limited to a few first-gen models), overheating (again, rare and usually first-gen models). Other manufacturers have similar issues, but you never hear about them because they don't get eyeballs. Few care if some model of HP laptop overheats.

In general, Apple makes quality hardware. If it were otherwise, they wouldn't be able to charge so much.

Edit: I have no idea why this comment has been downvoted. Anyone want to clue me in?

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by mike-cardwell on Tuesday December 30, 2014 @08:09AM (#8814405)
"In general, Apple makes quality hardware. If it were otherwise, they wouldn't be able to charge so much."

My experience of Apple hardware, from owning it myself and from seeing how it fares for those around me who also use it, is that it's pretty, but poorly designed, lacking in features, and very unreliable.

They are able to charge so much because they market it well. Also, OSX is a decent OS in comparison to Windows, for those who can't be bothered to learn Linux.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by song on Tuesday December 30, 2014 @04:17PM (#8816783)
I administer about 40 servers under linux (well mostly with Chef and docker), I used to use linux on my main computer for 6 years (debian, gentoo and ubuntu). I have a freebsd server at home that I use for fun. And yet despite all that, my main computer for work nowadays is a mbp retina because I like OS X as an OS and as a GUI (despite some of it's bugs and annoyances). So I don't really agree with you.

In term of hardware, I've had a few lemons and I've complained loudly but under Applecare, Apple replaced the mbp retina I had that failed 3 times with a new model (which runs perfectly fin) so I can't really complain.

I've also had very long lived devices from Apple, my first ibook lasted 4-5 years until my parents sat on it, my wife's old powerbook lasted 6 years until it was stolen, my first generation iphone still works perfectly fine...

One thing I did learn though is never to buy a first generation model from Apple, they tend to be unreliable (at least in my anecdotical experience)

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by Retra on Tuesday December 30, 2014 @12:23PM (#8815543)
I don't really think that "learning Linux" makes it a better OS. Investing your time into Linux, maybe, but some of us want our OS to be time savers, not a time sinks.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by techrat on Tuesday December 30, 2014 @05:48PM (#8817181)
> Apple makes quality hardware. If it were otherwise, they wouldn't be able to charge so much.

How's that Kool Aid taste?

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by gnarbarian on Tuesday December 30, 2014 @06:20AM (#8814146)
As opposed to a mbp, which apparently will eventually overheat regardless of where it's placed.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by ekianjo on Tuesday December 30, 2014 @07:38AM (#8814317)
> In general, Apple makes quality hardware. If it were otherwise, they wouldn't be able to charge so much.

Oh, so you have never heard of the power of Marketing and branding ?

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by apetrovic on Tuesday December 30, 2014 @06:13AM (#8814133)
I hate laptops with vents on the bottom. I can't put it on my lap without constantly thinking did my leg obstructed the hole, I can't put it on the bed because the vents will be clogged. The only place where laptops with vents on the bottom works well is the desk.
[dead]
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by apetrovic on Tuesday December 30, 2014 @10:13AM (#8814882)
Is that "reality distortion field" jab pointed at me? The best laptop in my life is/was my trusty Thinkpad w520. No vents at the bottom, no overheating problems (two previous laptops were HP EliteBooks - a toy computers compared to Lenovo). Now I'm working on MacBook Pro, and yes, it's slicker than w520, but it have problems with heat.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by chroma on Tuesday December 30, 2014 @06:25AM (#8814154)
Please stop.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by stefantalpalaru on Tuesday December 30, 2014 @08:02AM (#8814389)
Who are you to tell somebody else to stop posting in a public forum? No, putting "please" in front does not make your aggression any less impolite.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by gnarbarian on Tuesday December 30, 2014 @08:38AM (#8814519)
It's very passive aggressive but it seemed to work, he said that and 10 minutes later half my comments on this page dropped from +4 to -4.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by stefantalpalaru on Tuesday December 30, 2014 @09:24AM (#8814666)
There are people/bots that will go through your comment history and downvote all your recent comments when you piss off the wrong users.
[dead]
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by Kurtz79 on Tuesday December 30, 2014 @08:57AM (#8814573)
If you want flame wars and care about upvotes/downvotes, there are plenty of other websites that will oblige.

Here posts are supposed to add something to the discussion, not to "tease" or provoke a response.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by gnarbarian on Tuesday December 30, 2014 @01:35PM (#8815915)
When someone is blatantly exhibiting cognitive dissonance and reasoning has failed to sway them why not tease them a bit? They deserve it.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by dang on Wednesday December 31, 2014 @05:26PM (#8821384)
Even if that's true, it degrades the discourse, and the harm that does to the community trumps whatever "teasing" a given user may or may not deserve.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by dzhiurgis on Tuesday December 30, 2014 @11:07AM (#8815113)
Are you pg?
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by dzhiurgis on Wednesday December 31, 2014 @06:00AM (#8818913)
The reason I asked is because parent user About says "I use this account for things I can't say: http://paulgraham.com/say.html".

His previous posts do not confirm the identity, but it does correlate with Paul Graham.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by berkut on Tuesday December 30, 2014 @07:25AM (#8814281)
The problem is that as you push the screen back from vertical, the area for air to escape gets reduced.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by 72deluxe on Tuesday December 30, 2014 @04:48PM (#8816928)
I had not noticed that but it is true! Does anyone know if the case acts as a good heatsink? I always assumed that was why they went with aluminium, other than it looking great.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by rtpg on Tuesday December 30, 2014 @06:38AM (#8814179)
they have little feet, they could totally put ventilation on the bottom (in fact many laptops do that already)
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by jbrooksuk on Tuesday December 30, 2014 @08:01AM (#8814385)
Except the feet can come off, thus rendering the ventilation useless if that were to happen.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by lookrealclose on Tuesday December 30, 2014 @10:46AM (#8815008)
I don't know... maybe on the side like my Latitude. I thought Apple users knew how to "think outside the box" LOL!
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by grandalf on Tuesday December 30, 2014 @07:03AM (#8814239)
I'm sure Apple has done some pretty exhaustive (no pun intended) thermodynamic analysis of the case design.

I have three macbooks, two airs and a 13" mpbr, and none have had any thermal issues at all, even in the heat of summer.

If you are using a laptop in a way that generates that much heat, you probably get about 1 hour of battery life, which sort of defeats the purpose of having a laptop in the first place. A larger fan or heavier case material would also make the laptop less user-friendly for the vast majority of users.

Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by marcosdumay on Tuesday December 30, 2014 @08:41AM (#8814532)
I'm a big fan of desktops... But you know, sometimes people want a portable computer, and also want to use it intensively once on a while.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by michaelt on Tuesday December 30, 2014 @09:08AM (#8814611)

  I'm sure Apple has done some pretty exhaustive (no pun
  intended) thermodynamic analysis of the case design.
If (as this article says) users have to reflow their boards and drill holes in their cases, I would say not exhaustive enough!
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by slantyyz on Tuesday December 30, 2014 @02:43PM (#8816301)
I think a big part of why the early 2011 MBPs are an outlier is that the Sandy Bridge CPUs Apple put in the 2011 MBP simply ran very hot under load.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by gnarbarian on Tuesday December 30, 2014 @05:41AM (#8814034)
My guess is they don't care as long at the vast majority make it past their warranty date
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by seanmcdirmid on Tuesday December 30, 2014 @06:47AM (#8814205)
I've never had a macbook break down even way past warranty.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by IndianAstronaut on Tuesday December 30, 2014 @05:50AM (#8814062)
I have always used an external laptop cooler with my macbook.
Re:Why I Drilled Holes in My MacBook Pro and Put It in the Oven by Kurtz79 on Tuesday December 30, 2014 @06:08AM (#8814115)
If you are speaking about stands with fans at the bottom, in my experience they do next to nothing.

All they do is "cooling" the aluminum bottom case, which has no contact (or though holes) with the inside parts of the laptop generating heath.