News for hackers. Stuff that matters.
Re:Steve Perlman's Wireless Technology Is Finally Here by cantfindmypass on Wednesday February 19, 2014 @12:54PM (#7264936)
No. The transmitters calculate signals such that constructive/destructive interference will combine to form a strong, clean signal in the precise location where the device is.
Re:Steve Perlman's Wireless Technology Is Finally Here by bdcs on Wednesday February 19, 2014 @01:19PM (#7265112)
Correct me if I'm wrong, but is this not beamforming?
Re:Steve Perlman's Wireless Technology Is Finally Here by lutusp on Wednesday February 19, 2014 @01:38PM (#7265253)
The problem is not the idea, but the word. Most people don't think of constructive phase adjustments as beamforming. It's not wrong, it's just an unfamiliar term.
Re:Steve Perlman's Wireless Technology Is Finally Here by gallamine on Wednesday February 19, 2014 @01:32PM (#7265208)
Perhaps the "trick" is a large number of antennas to produce an ultafine beam pattern?
Re:Steve Perlman's Wireless Technology Is Finally Here by lutusp on Wednesday February 19, 2014 @01:39PM (#7265270)
No, it's not the number of antennas (although there is always more than one), the method relies on the phase (or "time delay") of the signal at each antenna.
Re:Steve Perlman's Wireless Technology Is Finally Here by Dylan16807 on Wednesday February 19, 2014 @02:18PM (#7265565)
Why do you say no? The more antennas you have, the cleaner you can keep the beam and minimize constructive interference happening in the wrong places.
Re:Steve Perlman's Wireless Technology Is Finally Here by lutusp on Wednesday February 19, 2014 @02:25PM (#7265617)
I say no because the system relies on multiple antennas, but beyond a few, the advantage evaporates while the workload increases. I wouldn't be surprised if the system limits itself to three well-placed antennas surrounding the target device, just to simplify the calculations.

> The more antennas you have, the cleaner you can keep the beam and minimize constructive interference happening in the wrong places.

Beyond three antennas surrounding a given device, this just isn't true -- more antennas don't produce a proportional increase in performance to compensate for the increased computation workload.

Re:Steve Perlman's Wireless Technology Is Finally Here by foobarian on Wednesday February 19, 2014 @04:05PM (#7266214)
Not for one client device, but it definitely helps when handling lots of clients. The more antennas the fewer spots with unwanted constructive interference.
Re:Steve Perlman's Wireless Technology Is Finally Here by lutusp on Wednesday February 19, 2014 @04:11PM (#7266254)
> The more antennas the fewer spots with unwanted constructive interference.

Yes, true, but the entire system becomes more complex for a small improvement in performance. Also, most of the theoretical work in a scheme like this would focus on the least common denominator, which is three antennas.

Interestingly, for a roughly circular array of antennas, you end up with concentric rings of high signal strength as you approach the midpoint of the array. So even the thesis that you've eliminated unused hot spots breaks down in some cases.

Here's my diagram for three phase-controlled antennas (the blue dots):

http://i.imgur.com/tyyVh0j.png

The wavelengths in this diagram are longer than for a cell system, it's just to show how this idea works. Buy adjusting the phase at each antenna, you can move the high-strength lobes around to match up with the location of a given device.

Re:Steve Perlman's Wireless Technology Is Finally Here by foobarian on Wednesday February 19, 2014 @04:02PM (#7266200)
The trick is getting that many antennas deployed in an urban area. They also have to be wired, and have reliable low latency connections to the datacenter.