News for hackers. Stuff that matters.
Re:RJ45-sized Linux networking server goes IPv6 by nicholassmith on Saturday December 14, 2013 @07:39PM (#6907765)
Out of curiousity does anyone use any of these style devices? And if so what for?
Re:RJ45-sized Linux networking server goes IPv6 by pmorici on Saturday December 14, 2013 @10:10PM (#6908201)
I've used one of these before. They are useful for attaching serial devices to an Ethernet network. It's a lot cheaper and easier than trying to put a PC with enough serial ports near every device you need to talk to. The ones I worked with were part of a radio modem sold by MaxStream, now part of Digi International.
Re:RJ45-sized Linux networking server goes IPv6 by csmuk on Sunday December 15, 2013 @03:42AM (#6908799)
We used dedicated terminal servers for this function years ago. No PC required. DEC and Allied Telesis made them. Now I feel old.
Re:RJ45-sized Linux networking server goes IPv6 by pmorici on Sunday December 15, 2013 @03:59PM (#6910833)
That is essentially what these are. The default Lantronix firmware allows you to connect to the device on a specific TCP port and talk to the serial device on the other side. You configure them over HTTP or Telnet.
Re:RJ45-sized Linux networking server goes IPv6 by analog31 on Saturday December 14, 2013 @11:22PM (#6908372)
I use microcontrollers for prototyping and proof-of-concept work. Often I combine multiple devices into a system that I can control from a PC. It's been my experience that dropping in a something-to-serial converter is 100x easier than trying to install and understand a communication protocol "stack," even if the code and documentation is supplied by the chip vendor.

I tend to use little USB-to-serial breakout boards, but I'd do the same with RJ45 if I needed that interface.

Once something of mine is ready to commercialize, it gets handed over to professional developers who tend to prefer the built-in firmware based approach, but they end up spending a lot of time debugging those interfaces.

Re:RJ45-sized Linux networking server goes IPv6 by edwhitesell on Saturday December 14, 2013 @10:14PM (#6908210)
RIPE used these for the v1&2 versions of their Atlas measurement network. I've had a few running for about 3 years.

https://atlas.ripe.net/

Re:RJ45-sized Linux networking server goes IPv6 by joe_bleau on Saturday December 14, 2013 @08:59PM (#6907993)
We use them to add ethernet and new comm protocols to regulated legacy embedded devices that only have serial ports.
Re:RJ45-sized Linux networking server goes IPv6 by tlarkworthy on Saturday December 14, 2013 @08:50PM (#6907966)
Robotics, consolidate all your sensors and controllers onto Ethernet. Its quite hard finding a microcontroller with good Ethernet.
Re:RJ45-sized Linux networking server goes IPv6 by dlctr on Monday December 16, 2013 @02:44AM (#6913399)
The arduino yun [1] combines an linux-based SoC with a microcontroller on a single board. So you can have both, networking and applications in practically any language, and an internal interface to a microcontroller.

For only accessing a rs232 serial port over ethernet, there are easier solutions. But if you need multiple of such ports, sensor access, etc. its quite a nice combination.

[1] http://arduino.cc/en/Main/ArduinoBoardYun?from=Main.ArduinoY...

Re:RJ45-sized Linux networking server goes IPv6 by joezydeco on Saturday December 14, 2013 @09:06PM (#6908005)
I've had good success with the NXP LPC178x series. Cortex M3 with onboard Flash and SRAM. Ethernet is onboard and easy to attach with a simple PHY, also works well with extenral SDRAM and expanded Flash.
Re:RJ45-sized Linux networking server goes IPv6 by tlarkworthy on Saturday December 14, 2013 @09:12PM (#6908026)
yeah I also used that a while ago, but I don't think I can fit an ethernet client for Robotic Operating System on it. Doesn't appear straight forward anyway:-

http://mbed.org/forum/bugs-suggestions/topic/2662/?page=1#co...

Hmm, that Xport product is £50 from mouser. Not bad

Re:RJ45-sized Linux networking server goes IPv6 by joezydeco on Saturday December 14, 2013 @09:33PM (#6908093)
I don't quite understand mbed. It seems...toylike. I've been using ucLinux for 1788-based stuff. You get the full stack with that.

The other option is something like the TI CC3000, a serially driven wifi module. Adafruit just launched a cheap breakout module.

http://www.adafruit.com/products/1469

Re:RJ45-sized Linux networking server goes IPv6 by tlarkworthy on Saturday December 14, 2013 @09:41PM (#6908108)
everything we do is in volumes of 1. What is the dev board you use? Mbed is quite convenient for us doing random 1 offs.

EDIT: also can't find evidence of a ROS client working on ucLinux :(

Re:RJ45-sized Linux networking server goes IPv6 by joezydeco on Saturday December 14, 2013 @11:52PM (#6908424)
For LPC I've prototyped on boards from Future Designs, like this one:

http://www.teamfdi.com/development-tools-kits/products/1/DK-...

Re:RJ45-sized Linux networking server goes IPv6 by SwellJoe on Saturday December 14, 2013 @08:50PM (#6907965)
I immediately imagined adding web UIs, or simply network APIs, to various "dumb" hardware. Attach it to a ADC/DAC and suddenly a lot of things become computer controllable. It's small enough to stick it on most electronic device boards without major changes.
Re:RJ45-sized Linux networking server goes IPv6 by RankingMember on Saturday December 14, 2013 @07:49PM (#6907796)
Yeah these sort of "look at how small this fully functional computer is" pieces always make me wonder if they have a real world appeal or if they're more a proof-of-concept or tech demo to pull people's attention to the company's other products.
Re:RJ45-sized Linux networking server goes IPv6 by throwaway2048 on Saturday December 14, 2013 @08:12PM (#6907849)
this would be fantastic for corporate espionage, snap one into an unused to drop somewhere and you have a beachhead inside the network. Combine it with a Micro SD card you have a great way to exfiltrate data via weekly/monthly data drops, without setting off external firewalls.
Re:RJ45-sized Linux networking server goes IPv6 by joezydeco on Saturday December 14, 2013 @08:55PM (#6907982)
I didn't see PoE on this device, you need to supply 3.3VDC to make it run. So do you want to attach a wall wart? I don't think it will run long off a lithium cell.
Re:RJ45-sized Linux networking server goes IPv6 by em3rgent0rdr on Saturday December 14, 2013 @07:49PM (#6907797)
They say target use is internet of things. Makes for a great personal server too. I use a bunch of really small boards for fun, but not this small.
Re:RJ45-sized Linux networking server goes IPv6 by bound008 on Saturday December 14, 2013 @10:11PM (#6908202)
The pricing is on that page $39/each at qty 1000. I have seen the other models 2 years ago range from $50 to $70 at qty 1.