News for hackers. Stuff that matters.
Re:RJ45-sized Linux networking server goes IPv6 by tlarkworthy on Saturday December 14, 2013 @08:50PM (#6907966)
Robotics, consolidate all your sensors and controllers onto Ethernet. Its quite hard finding a microcontroller with good Ethernet.
Re:RJ45-sized Linux networking server goes IPv6 by dlctr on Monday December 16, 2013 @02:44AM (#6913399)
The arduino yun [1] combines an linux-based SoC with a microcontroller on a single board. So you can have both, networking and applications in practically any language, and an internal interface to a microcontroller.

For only accessing a rs232 serial port over ethernet, there are easier solutions. But if you need multiple of such ports, sensor access, etc. its quite a nice combination.

[1] http://arduino.cc/en/Main/ArduinoBoardYun?from=Main.ArduinoY...

Re:RJ45-sized Linux networking server goes IPv6 by joezydeco on Saturday December 14, 2013 @09:06PM (#6908005)
I've had good success with the NXP LPC178x series. Cortex M3 with onboard Flash and SRAM. Ethernet is onboard and easy to attach with a simple PHY, also works well with extenral SDRAM and expanded Flash.
Re:RJ45-sized Linux networking server goes IPv6 by tlarkworthy on Saturday December 14, 2013 @09:12PM (#6908026)
yeah I also used that a while ago, but I don't think I can fit an ethernet client for Robotic Operating System on it. Doesn't appear straight forward anyway:-

http://mbed.org/forum/bugs-suggestions/topic/2662/?page=1#co...

Hmm, that Xport product is £50 from mouser. Not bad

Re:RJ45-sized Linux networking server goes IPv6 by joezydeco on Saturday December 14, 2013 @09:33PM (#6908093)
I don't quite understand mbed. It seems...toylike. I've been using ucLinux for 1788-based stuff. You get the full stack with that.

The other option is something like the TI CC3000, a serially driven wifi module. Adafruit just launched a cheap breakout module.

http://www.adafruit.com/products/1469

Re:RJ45-sized Linux networking server goes IPv6 by tlarkworthy on Saturday December 14, 2013 @09:41PM (#6908108)
everything we do is in volumes of 1. What is the dev board you use? Mbed is quite convenient for us doing random 1 offs.

EDIT: also can't find evidence of a ROS client working on ucLinux :(

Re:RJ45-sized Linux networking server goes IPv6 by joezydeco on Saturday December 14, 2013 @11:52PM (#6908424)
For LPC I've prototyped on boards from Future Designs, like this one:

http://www.teamfdi.com/development-tools-kits/products/1/DK-...