News for hackers. Stuff that matters.
Re:OpenSUSE 13.1 Released by nathanb on Tuesday November 19, 2013 @11:20AM (#6762178)
I used to be a die-hard OpenSUSE user.

When 11.4 came out, I complained to my co-worker. "Man, another upgrade. Things always seem to go a little wonky after updating."

He said "wait, what do you mean?"

Turns out he was an Arch Linux user, and Arch uses a rolling release system. The idea of upgrading to a new version doesn't make sense; every system update gives you the newest tested version of everything.

(So now instead of things going wonky every few months, they go wonky constantly :)

OpenSUSE is a fine distro, especially if you're a KDE user. But if you're tired of a big bomb upgrade once every so often, consider a rolling release distro as well.

On the other hand, if you want to run the same code and not worry about upgrading for years, 13.1 is a good choice because it's a longterm support release and will continue to receive bugfixes until 2016.

Re:OpenSUSE 13.1 Released by rmk2 on Tuesday November 19, 2013 @11:28AM (#6762236)
If you want rolling-release, use openSUSE-factory[1], i.e. the development branch (though this might sometimes break on you). If you want an inbetween thing between rolling release and standard, use Tumbleweed[2], which is curated by Greg K-H and brings you new versions of important software, i.e. KDE/Gnome, kernel, git, vim/emacs etc. Tumbleweed uses a set of repositories called *-current, which are always symlinked to the current version. As of today, my next update will bring me onto 13.1 standard for all packages, while Tumbleweed will be emptied soon. In a little while, Tumbleweed will be populated again with updates newer than the 13.1 version, as they appear. This cycle continues until 13.2 is released, and then starts anew.

[1]: http://en.opensuse.org/Portal:Factory

[2]: http://en.opensuse.org/Portal:Tumbleweed

Re:OpenSUSE 13.1 Released by Swifty on Tuesday November 19, 2013 @11:28AM (#6762238)
Opensuse technically has two rolling models, The first being Factory which contains bleeding edge software that will is considered to be unstable. The second is Tumbleweed which just pushes updated Stable software.

Factory is manly for developers to test on and isn't rely for day to day use.

Tumbleweed can be used for day to day use, you just have to be aware that things can break.

Re:OpenSUSE 13.1 Released by sharms on Tuesday November 19, 2013 @09:08AM (#6761204)
I have been running this for a few months and it was worked well. For the curious I did use BTRFS as my default file system, and KDE4 desktop. A few things I do after installing: * Install proprietary nvidia driver * Install steam (this is a 1 click install from the Suse Wiki) * Install namtrac:subpixel for good looking fonts (zipper ar http://download.opensuse.org/repositories/home:/namtrac:/sub...) * Install ksuperkey to use the windows key to open the menu

Great release and nice to see the progress Linux is making!

Re:OpenSUSE 13.1 Released by yapcguy on Tuesday November 19, 2013 @11:13AM (#6762117)
Yes, congratulations to the OpenSuse team and everyone who contributes to the growth of Linux.

Reading what's new was interesting and, in some ways, exciting. In contrast, I live in fear whenever I read about what's new in the next iteration of Mac OS X.

Btw: OpenSuse 13.1 is an Evergreen release, which is like a Ubuntu LTS release, and will receive maintenance for the next 3 years.

Re:OpenSUSE 13.1 Released by mikevm on Tuesday November 19, 2013 @10:23AM (#6761713)
Quick KDE question from a KDE noob: When you open the KDE Menu, is there any way to make it focus the search textbox by default? Or is there a faster way of searching an application or file other than opening the KDE menu?
Re:OpenSUSE 13.1 Released by ewzimm on Tuesday November 19, 2013 @04:48PM (#6764746)
Re:OpenSUSE 13.1 Released by eeperson on Tuesday November 19, 2013 @10:56AM (#6761986)
On Debian (KDE 4.10) it does this by default. So, there must be a way to do it. Unfortunately, I'm not sure what that configuration is. Maybe if you open it with your keyboard 'alt+f1'?
Re:OpenSUSE 13.1 Released by blisterpeanuts on Tuesday November 19, 2013 @10:56AM (#6761989)
Open a console window and (at the $ prompt) type:

$ sudo zypper update findutils-locate (wait a couple of hours for the locatedb to build)

$ locate fullOrPartialFileName

(for case-insensitive search) $ locate -i fullOrPartialFileName

Re:OpenSUSE 13.1 Released by qwerta on Tuesday November 19, 2013 @10:43AM (#6761872)
alt-f2 ?
Re:OpenSUSE 13.1 Released by rmk2 on Tuesday November 19, 2013 @11:04AM (#6762046)
You can either hit ALT-F2 or you can just press ALT, hit the first letter of what you are looking for, release ALT, then continue typing.

After hitting ALT-F2, you will see a little spanner on the left of the dialogue that opens. Click on that and you get additional options where to search for your term, including devices, bookmarks, applications, the calculator etc.

Re:OpenSUSE 13.1 Released by andrewcooke on Tuesday November 19, 2013 @07:49AM (#6760770)
Yay! When my laptop gets back from being fixed it's going on (now is a good time to get the ISO over bittorrent - there will be many, many seeders). Download link (wrong in article?!) - http://software.opensuse.org/131

(Incidentally, do X series thinkpads still have the plug at the back? It switched from the side somewhere between X60 and X220, and if it's at the back it gets bent every time you pick the laptop up from the front - mine failed last week...)

Re:OpenSUSE 13.1 Released by loudmax on Tuesday November 19, 2013 @08:27AM (#6760979)
My X230 has the plug in the back. I'm careful when I pick up my laptop. It's a really stupid design decision, exacerbated by the shape of the plug. Otherwise I love my Thinkpad and it's Linux-friendly hardware.
Re:OpenSUSE 13.1 Released by andrewcooke on Tuesday November 19, 2013 @08:41AM (#6761053)
i thought i was careful too... fyi, when it fails you likely won't notice and the battery will run down. at that point it will appear completely dead. the way to test (obvious in retrospect) is to wiggle the plug and hold it at various angles - at some angle it will work. then, at least here in chile, a support centre can fix it.
Re:OpenSUSE 13.1 Released by abrowne on Tuesday November 19, 2013 @11:20AM (#6762176)
The X240 has the charger port on the left side, since it has an Apple-style drop hinge so the display covers the back.

http://laptoping.com/wp-content/uploads/2013/09/Lenovo-Think...

Re:OpenSUSE 13.1 Released by bluedino on Tuesday November 19, 2013 @08:43AM (#6761065)
Not sure why it's been 7 years since the Magsafe debuted on the MacBook Pro and every laptop doesn't use a similar power cord by now. So many laptops are broken (but fixable) by DC jacks breaking.
Re:OpenSUSE 13.1 Released by selectodude on Tuesday November 19, 2013 @11:13AM (#6762128)
Re:OpenSUSE 13.1 Released by edoloughlin on Tuesday November 19, 2013 @08:51AM (#6761116)
Only another 13 to wait, then (assuming the patents were filed after 1998).
Re:OpenSUSE 13.1 Released by jamiek88 on Tuesday November 19, 2013 @09:14AM (#6761237)
Yes, typical Apple really, one of those ideas that seem bloody obvious in hindsight, yet they are the only ones doing it.

Prob got a patent of some sort on it.

Looking forward to trying to get this running on my mid 2011 MBA, its currently running Ubuntu and works very well.

Re:OpenSUSE 13.1 Released by girvo on Tuesday November 19, 2013 @10:02AM (#6761550)
They did patent it, yeah.
Re:OpenSUSE 13.1 Released by hennevogel on Tuesday November 19, 2013 @08:00AM (#6760833)
DOH! Fixed the download link. Thanks :-)
Re:OpenSUSE 13.1 Released by xolve on Tuesday November 19, 2013 @02:43PM (#6763838)
I moved from Kubuntu to openSuse. On big plus is easier administration and almost generic packages (except branding). openSuse's Yast is basically a neat GUI wrapper and it works fine even if when you change some config manually.

You need to add Pacman repo to install the goodies.

You can choose to remain with FLOSS software or install proprietary packages if you want.

Besides, a distro doesn't matter much, what matters is what you do on that.

Re:OpenSUSE 13.1 Released by qwerta on Tuesday November 19, 2013 @08:05AM (#6760858)
OpenSUSE seems like best KDE distro just after Kubuntu.
Re:OpenSUSE 13.1 Released by pestaa on Tuesday November 19, 2013 @08:17AM (#6760924)
What do you like about Kubuntu more compared to openSUSE?
Re:OpenSUSE 13.1 Released by qwerta on Tuesday November 19, 2013 @08:22AM (#6760954)
Better font rendering, larger software selection, home folder encryption, WIFI firmware included on CD. I also think apt is better package manager. On other side SUSE has better installer.

I am not sure Kubuntu will survive 14.04. Perhaps there will be replacement based on Debian. Perhaps it will be time to move to OpenSUSE.

Re:OpenSUSE 13.1 Released by andrewcooke on Tuesday November 19, 2013 @08:29AM (#6760993)
font rendering is just config. first thing i do with opensuse is install the mstttfonts and enable anti-aliasing (weak hints). [edit] the patent issues have long since died away - http://www.freetype.org/patents.html

i'm pretty sure (no numbers) package selection isn't less on opensuse, it's just distributed over more repos. use http://software.opensuse.org/search

you have more encryption options with opensuse - the yast installer (partition manager) is more flexible than the ubuntu one (i couldn't duplicate my opensuse install with ubuntu and had to go with something simpler). and home directory encryption is an option in yast under "details" for add new user.

i have used both. ubuntu is the nicer "out of the box" (it feels more apple-ish). but opensuse allows you to fiddle more - as a developer i prefer opensuse because it's easier to poke around and change things. yast is a huge help when you want it and stays out of the way when you don't - for me it makes opensuse the sweet spot between ubuntu and distros like debian.

Re:OpenSUSE 13.1 Released by qwerta on Tuesday November 19, 2013 @08:39AM (#6761043)
> font rendering is just config.

Not just config, but patents! There are patents which covers font rendering (thanks a lot apple), so freetype in most distributions is crippled. Ubuntu ships with those patches.

I think on OpenSuse I could install patched freetype (or Infinality which think uses different algorithm).

> but opensuse allows you to fiddle more

I mostly do Debian, so creating a few symlinks is simple. I used Suse a lot 10 years ago.

Re:OpenSUSE 13.1 Released by mikevm on Tuesday November 19, 2013 @10:28AM (#6761758)
Are you saying that one doesn't need to use these patches on Ubuntu: http://www.infinality.net/blog/infinality-freetype-patches/ ?
Re:OpenSUSE 13.1 Released by qwerta on Tuesday November 19, 2013 @10:57AM (#6761995)
I have to retract my previous statement about fonts.

My config is bit unusual, VRGB with inverse colors. I just installed Suse 13.1 alongside my Kubuntu 13.10 and rendering looks good on both.

I also tried Infinality on 13.1, but fonts did not improved. It also does not seems to have VRGB settings.

Also Firefox in Suse is using KDE file dialogs. Kubuntu gave-up on this long time ago.

So I think I found new home, after my current installation expires.

Re:OpenSUSE 13.1 Released by DArcMattr on Tuesday November 19, 2013 @02:36PM (#6763798)
Most of the infinality patchset was merged into the Freetype project in time for version 2.5, and according to Distrowatch, OpenSUSE 13.1 is running 2.5.1.
Re:OpenSUSE 13.1 Released by andrewcooke on Tuesday November 19, 2013 @09:09AM (#6761205)
patent issues ended in 2010. yast is more than creating symlinks.
Re:OpenSUSE 13.1 Released by ewzimm on Tuesday November 19, 2013 @04:51PM (#6764770)
From the release: openSUSE 13.1 comes with much improved font hinting thanks to the new font engine in Freetype 2.5.

It's actually fixed by default now.

Re:OpenSUSE 13.1 Released by bluedino on Tuesday November 19, 2013 @08:44AM (#6761069)
>> font rendering is just config

Linux is just config

>> ubuntu is the nicer "out of the box"

Very true - I used to stick with Fedora and then tweak it to make it more Ubuntu-ish but then I just gave up and gave in to Ubuntu.

Re:OpenSUSE 13.1 Released by TallGuyShort on Tuesday November 19, 2013 @10:34AM (#6761806)
I used to like apt, but then I kept running into situations (which I'll admit ought to be more rare than they are in my situation) where I needed to install software packages for which some of the dependencies had since disappeared. I looked at the source and determined that the dependency was not necessary, and that I wanted to proceed without it. I could either rebuild the package myself, (which is not always trivial if the package maintainer did a lot more than just build and install the source), or ask the package manager to let me make the decision.

Apt provides no option, and if you attempt it, it will not allow you to do anything else to the system unless you remove the package with the missing dependency, requiring you to then re-install the same file every time you make a change to the system.

Zypper shows you a large warning about the consequence of installing packages without their dependencies. It then asks you if you would like to cancel the transaction, try and find the dependencies, or proceed at your own risk. It then honors that choice.

The latter is perfect!

edit: I'll agree that this is bad practice, but this happens a lot with projects that were built back when Oracle JDK was legal to distribute that way, and they require that package. I can install the correct version of Java in all the ways the package expects - but then I need to create an empty package with the name it wants. I think that's a worse work-around than explicitly overriding the dependencies.

Re:OpenSUSE 13.1 Released by icebraining on Tuesday November 19, 2013 @02:15PM (#6763622)
I could either rebuild the package myself, (which is not always trivial if the package maintainer did a lot more than just build and install the source)

You can get all those changes by fetching the source package from which the .deb is built by running "apt-get source <package>". Then just edit the dependencies in debian/control and rebuild the package using "debuild".

Re:OpenSUSE 13.1 Released by izietto on Tuesday November 19, 2013 @08:07AM (#6760872)
> YaST has been ported to Ruby

!!!

Re:OpenSUSE 13.1 Released by Mikeb85 on Tuesday November 19, 2013 @10:44AM (#6761882)
Why not? Ruby's a great scripting language. Apparently alot of SUSE devs are also Rubyists...
Re:OpenSUSE 13.1 Released by izietto on Tuesday November 19, 2013 @01:09PM (#6763067)
It's just that it surprises me when applications are written in Ruby instead of Python, especially on Linux where Python seems to be the king of the high level languages
Re:OpenSUSE 13.1 Released by ht_th on Tuesday November 19, 2013 @08:37AM (#6761033)
From YaST's own language ...
Re:OpenSUSE 13.1 Released by maw on Tuesday November 19, 2013 @11:45AM (#6762377)
Yeah, kinda weird. Why didn't they port rails to ycp instead?