If you notice guy obviously competent and expeirienced in the field presenting something stupid it's more likely than not that you are missing piece of knowlege that is required for understaning why it actually isn't stupid.
Just watch the movie. It shows how to deal with doors and windows.
The problem is that pre-fabricated or pre-manufactured homes are a very specific category of homes and require specific disclosures when selling and financing. It's basically a derogatory term used to describe cheaply built structures that are a step above mobile homes.
Home being one of the most valuable assets a typical family holds. In SoCal and many other places, land makes up the bulk of the value. Place a structure on that land that then detracts from the value doesn't seem very prudent. Not to mention difficult to finance, as banks do not look favorably on that class of building.
So, unfortunately, innovation has to deal with current market and regulatory frameworks. 3D printing as proposed (though my not be valuable), would probably fall under the "custom house" label, which is the most valuable classification. Even if it's just a tract home, it's still a lot better than being considered pre-fab/pre-manufactured.
http://www.channel4.com/programmes/grand-designs/episode-gui...
> Revisit: Walton, 2008
> Kevin revisits David and Greta Iredale, who replaced their original house which they designed and built themselves with a German built, precision engineered Huf Haus.
> Esher, 2004
> Kevin McCloud follows a couple who have built houses before, but never on this scale. Their new 'Huf Haus' is designed and made in Germany but delivered for assembly in Surrey.
The above definition lumps them together and unfortunately if there isn't something that makes the home not fall under that definition, you are going to have to disclose this at sale and financing will be a PITA...
"The event featured talks on crystal therapy and Egyptian psychoaromatherapy and, according to the schedule, closed with the chanting of mantras and songs for Gaia."
http://www.theverge.com/2012/12/10/3751786/ted-pseudoscience...
The thing that intrigues me about fiberous ceramics for deposition printing is that no printers currently take advantage of the (albeit tiny) tensile strength of the deposited filament.
For plastic printing, this isn't very useful, but potentially for this new construction compound you could effectively (or nearly so) bridge gaps with little droop or sag.
I do think from an engineering perspective that placing blanks underneath is the best bet, but on the order of a 20-hr print, I don't think its unreasonable to have someone walking around with the machine placing single layer "blanks" at each opening at each level.
Is easily solvable though by having the robot drop a plank across the gap before printing the lintel, so I don't think that is a showstopper.
My point is not that the problems are not addressable, they are, rather its that "3D Printing" and "Homes" isn't a good fit yet given what we know. This neither invalidates 3D printing as a pretty revolutionary way to manufacture, nor the notion that there might be better ways to build homes, just that this particular thought experiment is a pre-mature at best, and potentially forever impractical.
Along the same lines I have been sketching designs for a robot to lay down 2-part foam, wire mesh and shotcrete, though I have been trying to work out if I can get it to climb its own wall, rather than needing a giant crane.
Also as others point out this is just the frame (and if you do the robotic crane thing you can add a roof. You might also be able to use your robotic crane to do joists for overhangs but the finish suffers as your joist material is exposed on the underside.
No doubt solvable problems but they take away from some of the 'magicalness' of fused deposition printing. Stereo lithography where the part is neutrally bouyant in the construction fluid doesn't have those issues but it has other issues associated with strength and material choices that can be laser activated.
For now doing a concrete lay-up would be pretty killer but building the forms on site isn't that hard and in both cases you need to transport the concrete at the last minute.
Bottom line I think the stuff that BluHomes [1] is doing is much more creative than trying to do this with 3D printing.
[1] http://www.bluhomes.com/