News for hackers. Stuff that matters.
Re:How to CAD Almost Anything by xnx on Thursday November 19, 2026 @05:59PM (#50567769)
Probably a useful intro tutorial for basic traditional CAD, but I don't see any mention of photo to 3D or AI assisted CAD. Workflows must be very different now.
Re:How to CAD Almost Anything by matchstickman23 on Thursday November 19, 2026 @06:21PM (#50568004)
Not really all that different so far, even in companies where AI is extremely encouraged. From what I've seen, AI can help with tangential tasks to the actual design (exploded views, interference checks, probably basic drafting layout, etc) but it's still not that great at designing mechanisms or things that will be "used". By which I mean that AI doesn't have the same understandings as a human designer for how an item is intended to be used or operated.
Re:How to CAD Almost Anything by radish_spirit on Thursday November 19, 2026 @06:32PM (#50568094)
I can second this. I'm at an extremely AI-forward company, and though there are very aggressive internal efforts to figure out AI-first CAD workflows, it's the general consensus that the technology just isn't quite there yet.
Re:How to CAD Almost Anything by YuechenLi on Thursday November 19, 2026 @07:20PM (#50568505)
Just curious, what do you think is lacking in the current AI-first CAD workflow that makes it less than production ready?

Full disclosure, I'm currently trying to build something to solve this and it would be nice to get some market feedback.

Re:How to CAD Almost Anything by zonkerdonker on Friday November 20, 2026 @12:48AM (#50570642)
Ill take a shot at answering. Im also an ME at a very AI forward company.

The hard part of mechanical design isn't really the CAD. Ask any long time professional mechanical design engineer, and I can almost guaruntee you that they will tell you that they can CAD up a design faster than they can think it. There are AI tools that can absolutely help with some of the more tedious tasks in the process (2D specification and tolerancing, part families and variants, texture tables etc). The difficult part of the job is synthesizing the massive number of variables and requirements and finding an optimal solution. Current models have been trained on all sorts of 3D, not just functional mechanical designs. AI doesnt know that a MIM steel part from vendor X can have a thinner wall thickness compared to a diecast steel part from vendor y, which would mean x grams of weight saving which cpuld be used to shore up a weak area on the other side of the part. It doesnt know that a sharp corner near an injection gate can cause porosity in some materials. It's not good at designing strong parts in general. It doesnt know that the ID team wants a specific surface on an user-facing surface which requires draft angle minimums relative to the mold parting direction. And, if you take the time to gather all that data and then type it all out for a model, you would spend twice as long writing everything down in plain language as it would take to just CAD it up yourself.

It can take months to gather all of these requirements piece by piece from all teams across the org (rf design, thermal, structural and FEA, aerodynamics, environmental ratings, safety, etc etc), and as the design matures things change as well.

For professionals with training in the tools, CAD as it is now is already the most optimal method of getting a design into the computer, and that was never really the hardest part of the process anyway.

Re:How to CAD Almost Anything by YuechenLi on Friday November 20, 2026 @03:10AM (#50571617)
So... many of these are just DFM checks, right? Requirement checks like draft angle minimum and refusal of sharp angles near gates can be enforced programmatically during build time, and in terms of strength of material those can be checked via fast FEA. You are correct that modeling is never the hard part and everything else that happens after modeling is, and I do agree with you that the current AI CAD is insufficient on that front because they overfocus on the modeling portion.
Re:How to CAD Almost Anything by breakfast_burri on Friday November 20, 2026 @05:04AM (#50572529)
I’d also add that a truly parametric cad model requires either a mystical level of precognition or constantly evaluating the function of the part and what is likely to change in each design step. AI struggles with functional evaluation (especially with moving components) and guessing what might be changed in the future.
Re:How to CAD Almost Anything by zonkerdonker on Friday November 20, 2026 @11:09AM (#50576904)
My examples were there, sure. But they are "just DFM checks" if you know what manufacturing process is required for the part. Knowing that means knowing volumes, cost targets, part requirments, etc. Which again, is the hard part.
Re:How to CAD Almost Anything by nitroedge on Thursday November 19, 2026 @11:45PM (#50570286)
kind of like when people shrugged off AI's ability to do image generation because it always created 6 fingers. Same story, very soon it will generate exactly what takes us hours or weeks to model now in minutes.
Re:How to CAD Almost Anything by Silamoth on Friday November 20, 2026 @10:02AM (#50575623)
Your reply seems premised on the notion that “AI” image generation is good. I think most people would disagree with this. “AI” image generation is still laughably bad and painfully obvious. Most of us regularly laugh at “AI” generated flyers and such.
Re:How to CAD Almost Anything by nitroedge on Friday November 20, 2026 @12:02PM (#50577957)
Your reply is premised on the fact (which I agree with) 95% of AI image generation is horrible, plastic, and artifical without any substance. Its the other 5% which when prompted and carefully thoughtfully crafted with perhaps a LoRA and fined tuned to an art style is awesome and can't readily be dismissed as AI generated.
Re:How to CAD Almost Anything by fhub on Thursday November 19, 2026 @06:52PM (#50568291)
Play around with feature script in onshape via their mcp and api’s in combination with playwright automation of the overall document. You’ll also need locale tools and a local copy of geometry model in say json. But it is mind blowing combination.
Re:How to CAD Almost Anything by criemen on Thursday November 19, 2026 @06:52PM (#50568296)
I'm very curious about this. I don't know anything about this space, but saw that OpenAI was advertising their mechanical engineering capabilities for the 6.2 release. How large of a part of the job is what AI can do at the moment? Do you feel a big jump in capabilities on each model release?
Re:How to CAD Almost Anything by numpad0 on Thursday November 19, 2026 @06:50PM (#50568267)
[delayed]