https://sound-au.com/project117.htm "One flash and you're ash !" 260 VOLT DC POWER RAILS!
All you really need is 100 W for a good home HiFi. I have a set of the shorter Magnepan (forget the model) with a decent 100W Sony amp and at mid volume is too loud to comfortably listen to yet sounds very crisp and clear with a sealed 12 inch sub driven by a 150 W amp.
Easily enough to switch me off permanently if the screwdriver slips.
https://sound-au.com/project3a.htm
It had so much capacitance on the DC bus that you could it unpowered for a solid minute with actual program material.
What power level? 120V on a 15A breaker?
I = V/R and a typical speaker is 8 ohms which does happen to result in 15A at 120V. Interesting.
I wonder how true the claims really are. Rod E. of sound-au.com even questions the claims. I see some cheap "1500" watt RMS 8 ohm speakers for like 150 bucks, might be a good test, plug it into the wall through a variac and turn up the power to the full 1500W and see how long it lasts. I am too lazy to look right now but I am sure someone has tried this and put up a video.
https://emaudio.com/product/12-custom-hand-built-subwoofer-8...
These competition grade units would probably trip your breaker before they burn up.
I still would still like to see how long a so called 8 ohm 1500W speaker will survive on 100-120 VAC mains.
My Leak Stereo 20 (a late '50s HiFi valve amp I have in daily service) was advertised at ten watts per channel, not only is that plenty of power for a home office or living room into reasonably sensitive but inexpensive speakers, it'll actually go a bit higher than claimed without distorting. At some point we decided to stop accounting honestly with power levels I think.
I'm pretty sure the 34" speakers he shows off at around 12:45 could do that. Some napkin maths says he could plug these directly into a electric dryer circuit and emit about 135db(!) at 50hz.
I have to take umbrage with this. Metal band Manowar clearly specified blowing one's speakers with rock and roll, not a electric dryer circuit.
There are pro audio amplifiers that are capable of producing >120v RMS at their output terminals. I would be much more interested in seeing a youtuber purchase one of these and attempt to run a bunch of household appliances using it. Blowing up random shit with ridiculous amounts of power got pretty old for me as a form of entertainment.