Re:Billion Watts in the Speaker [video]
by bob1029 on Tuesday November 10, 2026 @10:34AM
(#50441837)
Here is an example of what I am referring to:
https://emaudio.com/product/12-custom-hand-built-subwoofer-8...
These competition grade units would probably trip your breaker before they burn up.
Re:Billion Watts in the Speaker [video]
by MisterTea on Tuesday November 10, 2026 @10:49AM
(#50442064)
Indeed, those dual 1 or 2 ohm coils. Even in series they would pull 30 and 60 amps respectively at 120 VAC. You could feed it from a two pole 60 or 125 amp breaker though at 1 ohm it would pull 14400 W and likely not last very long.
I still would still like to see how long a so called 8 ohm 1500W speaker will survive on 100-120 VAC mains.
Re:Billion Watts in the Speaker [video]
by gizajob on Tuesday November 10, 2026 @02:56PM
(#50445461)
I worked for a manufacturer/importer of audio gear in Australia and if you have the gut instinct to question the rated watts then those are generally the peak watts in the nanosecond before the thing catches fire and gives up the ghost.
Re:Billion Watts in the Speaker [video]
by BoxOfRain on Wednesday November 11, 2026 @08:11AM
(#50453001)
I strongly suspect claims of amp and speaker wattages in general have been bollocks for years.
My Leak Stereo 20 (a late '50s HiFi valve amp I have in daily service) was advertised at ten watts per channel, not only is that plenty of power for a home office or living room into reasonably sensitive but inexpensive speakers, it'll actually go a bit higher than claimed without distorting. At some point we decided to stop accounting honestly with power levels I think.
I wonder how true the claims really are. Rod E. of sound-au.com even questions the claims. I see some cheap "1500" watt RMS 8 ohm speakers for like 150 bucks, might be a good test, plug it into the wall through a variac and turn up the power to the full 1500W and see how long it lasts. I am too lazy to look right now but I am sure someone has tried this and put up a video.