https://www.gardco.com/product/pencil-hardness-test-kit-astm...
Why offer erasers on these things? The procedure described below has nothing to do with using these as pencils, and at $500 for a pack I can't imagine anyone, anywhere casually drawing with these.
(Is there another procedure, similar to the one described below, except instead of dragging the pencil tip across a surface you drag the eraser across it? )
Http://www.rstengineering.com/rst/articles/tsodpencil.pdf
I had no idea this reference existed, or that it's a a fun, though dystopian, read.
Thanks! :)
and you dont need to fit the car into a proper harness tester?
> For the pencil hardness test, reference ASTM D3363, pencils of increasing hardness values are moved over the surface in a precisely defined way until one lead damages the surface. Surface Hardness is defined by the hardest pencil grade which just fails to damage the surface.
> Observe the pencil track. Sufficient pressure must have been applied either to cut or damage the coating or to crush the lead pencil point.
> If neither coating damage or pencil point crushing is observed, repeat the test until a definite observation is made.
> If scratching or damage of the surface occurs, proceed with the next softer pencil grade and repeat the testing process until a pencil lead grade is found which crushes and does not damage the coating.
> If crushing of the hardest lead should occur, the coating is therefore extremely hard and is beyond the measuring range of this test
[1]: https://youtu.be/esQyYGezS7c?t=226