News for hackers. Stuff that matters.
Re:The most official water costs $120k a gallon by foobarian on Friday July 31, 2026 @05:09PM (#49128549)
Can I ask why :-) Sounds like an interesting project.
Re:The most official water costs $120k a gallon by wildzzz on Friday July 31, 2026 @06:46PM (#49129398)
You use the kit to test the harness of a finish coating, like a paint or a ceramic coating for cars. Pencils have their own hardness scale which can be used to gauge the hardness of the coating. Its really more of a relative qualitative test than quantitative as you'd use this for sample/coupon testing identical coatings. There are more absolute, quantitative methods to measure various hardness characteristics (scratch, indentation, and rebound). Like you'd use the pencil kit on a factory floor to make sure each paint sample performs the same, the sample being a small area on the product or a plate that's painted the same way.
Re:The most official water costs $120k a gallon by 8note on Friday July 31, 2026 @07:20PM (#49129597)
the pencil aspect is because its easy for a person to carry and take notes with?

and you dont need to fit the car into a proper harness tester?

Re:The most official water costs $120k a gallon by wildzzz on Friday August 07, 2026 @11:37PM (#49218697)
No, these are expensive pencils that have high quality assurance to make sure the graphite is as hard as it's supposed to be. You use a jig to hold the pencil in a specific way each time. Don't think of it as a pencil, it's a kit of rods made from graduated compositions of graphite and clay. You could write with one but that's like making a PB&J with the NIST peanut butter, a waste of money.
Re:The most official water costs $120k a gallon by cwillu on Friday July 31, 2026 @06:20PM (#49129184)
His link includes procedures, which suggest he was testing the hardness of some surface coating or similar:

> For the pencil hardness test, reference ASTM D3363, pencils of increasing hardness values are moved over the surface in a precisely defined way until one lead damages the surface. Surface Hardness is defined by the hardest pencil grade which just fails to damage the surface.

> Observe the pencil track. Sufficient pressure must have been applied either to cut or damage the coating or to crush the lead pencil point.

> If neither coating damage or pencil point crushing is observed, repeat the test until a definite observation is made.

> If scratching or damage of the surface occurs, proceed with the next softer pencil grade and repeat the testing process until a pencil lead grade is found which crushes and does not damage the coating.

> If crushing of the hardest lead should occur, the coating is therefore extremely hard and is beyond the measuring range of this test

Re:The most official water costs $120k a gallon by buildsjets on Friday July 31, 2026 @08:53PM (#49130114)
The pencil hardness scale is commonly used to assess paint film hardness by checking what is the softest pencil that can mar the surface when you scratch it with a given force. In this case, we needed to assess whether exposure to a certain chemical degraded the integrity of the paint coating that we were counting on for corrosion protection.