News for hackers. Stuff that matters.
Re:Upgrading RAM on new iMac practically impossible by arn on Sunday December 02, 2012 @10:42PM (#4863827)
And, a hood inaccessible to me wouldn't materially impact my purchase decision of a particular car, since my ability to service my own car is pretty much zero.

For example, I don't even know how one accesses the "engine" of the Teslas but it doesn't bother me one bit that I can't access it.

Re:Upgrading RAM on new iMac practically impossible by saurik on Sunday December 02, 2012 @10:48PM (#4863848)
I don't know how to service my own car either, but I'm pretty glad the hood isn't welded shut as I do like that I can get it serviced cheaply by a professional (whether a third-party or the original dealer): even if you don't want to take something apart yourself, the fact that simple repairs or upgrades will take hours of risky (as in, possibility of destruction of the device) labor or require replacing large expensive parts unrelated to your goal is not magically irrelevant.
Re:Upgrading RAM on new iMac practically impossible by whichdan on Sunday December 02, 2012 @10:47PM (#4863840)
I don't know much about cars, but I still:

- check my oil

- replace my windshield washer fluid

- check my coolant

- jumpstart my engine

- (rarely) jumpstart someone else's engine

I know most people on HN have already sold a company for seven or eight figures, but for the rest of us, it's nice to have some flexibility :)

Re:Upgrading RAM on new iMac practically impossible by modoc on Sunday December 02, 2012 @10:55PM (#4863869)
Upgrading RAM in an iMac is honestly probably more like replacing the carb with a Holley 4-barrell (in an older car), or swapping in a larger turbo, or something similar, than any of the examples you listed above. Although we may be waist deep in the silly analogy weeds at this point... The number of people who will be impacted by this limitation is probably a rounding error versus the number of iMacs sold.
Re:Upgrading RAM on new iMac practically impossible by lostlogin on Sunday December 02, 2012 @11:03PM (#4863887)
I'd say its considerably more common than a carb conversion. At the end of a Mac's life I typically keep bunging RAM in to keep it as powerful as possible. I know several people who do the same.
Re:Upgrading RAM on new iMac practically impossible by Dylan16807 on Sunday December 02, 2012 @11:21PM (#4863930)
Those things are hard to do, which screws up the analogy. RAM in laptops I've had is behind a single screw and pops in in seconds.
Re:Upgrading RAM on new iMac practically impossible by dhughes on Sunday December 02, 2012 @10:54PM (#4863865)
I don't buy that argument for all devices, maybe for you it's OK.

A clogged PCV valve, a small one-way valve for engine gasses, is a common problem the part is about $5.00 and you remove/install with a socket wrench. Or the air filter which in wintery climates will fluff up from salt when it gets wet, a simple fix. Or corroded points on a distributor, or a loose battery cable, dead battery, bad spark plug wires etc..

A computer with dusty CPU heat sync, maybe a RAM stick needs to be reseated or has failed, graphics card needs to be reseated, graphics card heat sync needs dusting, hard drives replaced with larger capacity, more RAM etc..

As much as engineers or designers like to think they are perfect there isn't any device made by a human which will work perfectly without some some of updating, adjustment, maintenance or tinkering.

Re:Upgrading RAM on new iMac practically impossible by arn on Sunday December 02, 2012 @11:11PM (#4863908)
But that's because you know what a socket wrench is.

Take it to an industry you don't know anything about, and see if that interest holds up, because that's what it's like for the majority of customers in any particular industry.

Do you care if your AC unit has a user accessible panel rather than something that requires special tools? Do you care that your Microwave doesn't have any user serviceable parts? I don't care about either. It's not on my radar at all when I buy those things.

Re:Upgrading RAM on new iMac practically impossible by Dylan16807 on Sunday December 02, 2012 @11:30PM (#4863954)
The way AC dumps out moisture and can build up dust, I definitely want to be able to get in there. With a microwave, well, overall it's not that important but if it's actually possible to buy single parts at a suitable price then I'd certainly like the ability to pop it open and replace a bulb in less time than it takes to drag a new microwave in.
Re:Upgrading RAM on new iMac practically impossible by arn on Sunday December 02, 2012 @11:41PM (#4863986)
Microwave parts do seem readily available, yet it's not been something that has been on your radar. Are you suddenly going to become proficient in microwave repair, or will you simply acknowledge that it's not in the realm of your interest to pursue such things. Similarly, there are many people who don't have the time or care about the user-accessibility of their computer (or their car).
Re:Upgrading RAM on new iMac practically impossible by jiggy2011 on Sunday December 02, 2012 @11:57PM (#4864026)
I would guess mainly because a Microwave starts at ~$30 whereas an iMac starts at about $1000 and obviously cars are even more.

This stuff becomes important when you have an item that is expensive enough to bother repairing.

I guess most people would be pissed if they spent $20,000 on a new car and when the clutch failed were told they needed to replace the entire car or spend many thousands of $ having the entire transmission rebuilt rather than being able to take it down to the local repair shop and have them do it within a day for a few hundred $.

Re:Upgrading RAM on new iMac practically impossible by arn on Monday December 03, 2012 @03:13AM (#4864451)
You're mixing your analogies. The correct analogy would be (roughly)

"I guess most people would be pissed they spent $20,000 on a new car and were unable to easily service it themselves".

And my answer to that is no, most people wouldn't be pissed. They would take it into a repair shop that can handle it.

Re:Upgrading RAM on new iMac practically impossible by jiggy2011 on Monday December 03, 2012 @04:14AM (#4864603)
That was not the analogy. You can consider "servicing it yourself" and "taking it to a repair shop of your choosing" to be basically equivalent.

If the car has been designed in such a way that a relatively common maintenance task (changing spark plugs, upgrading RAM or whatever) is now much more difficult (thus expensive because the mechanic will charge you for more hours of labour) than it otherwise would have been (or impossible) and reduces your choices of service providers then this is definitely not a good thing to the customer.

Of course sometimes such design changes are inevitable trade-offs against something else. For example a laptop is less maintainable than a desktop but you gain vastly increased portability. In this case (the iMac) it's not obvious what the gain to the customer is.

Re:Upgrading RAM on new iMac practically impossible by Dylan16807 on Monday December 03, 2012 @07:52PM (#4868921)
I don't have to be 'proficient' to pop out a slotted part and put in a new one. If something can be made easy-to-service with next to no trade-off, like RAM, it should be. I haven't had the motivation to look at microwave accessibility, because microwaves are cheap and all do the same thing. But if I was looking at the upgrade option that could make it cook twice as fast as easily as replacing a light bulb, and it was $400 to have the factory install a $50 part, I think I would 'have the time'.
Re:Upgrading RAM on new iMac practically impossible by dhughes on Monday December 03, 2012 @11:10PM (#4869493)
Yes I care very much!

Proprietary equipment and exclusive repair rights is terrible for consumers we need choices and alternatives.

At least now, staying with the car example, even if I can't fix it or don't know how at least I can take it to any garage instead of only Ford or only GM.

If I could only take it to Ford they could charge whatever they wanted for service and parts.

Microwave ovens even printers have become so cheap they are practically disposable they have no parts, or unserviceable parts (surface mount components) or cost so little repairing it is a waste of time. If they could be repaired it would be better for the consumer to spend say 10% of its value instead of buying a new unit.

Re:Upgrading RAM on new iMac practically impossible by Jach on Sunday December 02, 2012 @11:16PM (#4863921)
If it doesn't matter to you that a hood is inaccessible, it also shouldn't matter to you that a hood is accessible. For other people it does matter. So the question is: who wants the hood to be inaccessible, and why? Clearly none of the customers want it inaccessible, they either want it accessible (and I don't think they care all that strongly if they're already set on an Apple product), or in the majority case are indifferent. So Apple must know their bottom line is better this way (there are some obvious ways why it can be) and is perfectly happy telling people "put up or don't do business with us." Unless Apple's shown to be wrong, I wouldn't expect a change.
Re:Upgrading RAM on new iMac practically impossible by arn on Sunday December 02, 2012 @11:23PM (#4863936)
I'm not saying it's better that the hood is inaccessible. I'm saying it doesn't move the needle for me.

Sure, if all things were equal, then yes, I'd prefer an accessible hood. But all things aren't equal. There are design tradeoffs. What if there were a seamless car with no breaks for the hood to open/close? And that really looked nice to you?