> unsurprisingly
I'm unsure what is meant here. Does Microcenter usually have very cheap prices, or the opposite for Adafruit?Adafruit tends to be a bit more expensive. It's never bothered me since I like the company and its service, but I think pretty much anything you buy there ought to be purchased with the thought that you're prototyping and if you want to buy many parts for a final product, you'll eventually want to source parts somewhere else. (or, I assume, call Adafruit and try to negotiate a better price)
It's understandable enough why both companies are this way. Microcenter is a retail chain and can do things Adafruit cannot. (in truth, they are partners on some things, so it's more complicated than that - the point is that Microcenter is a much larger company)
Raspberry Pi are working on the issue but letting you spend the same amount of money per GB, for fewer GB.
An 8 GiB DIMM for a desktop or server is using 8x 1 GiB chips or 16x 512 MiB chips (9/18 for ECC). An 8 GiB Pi uses a single 8 GiB chip. That's the same density as you would use for 128 GiB or larger sticks.
Thank you for the explanation.
I wish PIs used SODIMMs. I'm sure there's a reason they don't involving address and data lines, but I wish they used cheap, commodity RAM.
You can't use other speed standards of RAM in a computer designed for a faster (or slower) standard.
If it needs DDR5 it can't use DDR, DDR2, DDR3, or DDR4. I don't think I've ever seen any x86 machine that could use older slower standards.
You could use EDO in some FPRAM machines, and FPDRAM in EDO machines at a 15% speed penalty. You can use slightly faster DRAM in a machine that wants slower: later in their lives, I maxed out the RAM in some PowerMac G3 machines that wanted 66MHz DRAM using cheaper, already obsolete, 100MHz DRAM, or 133MHz DRAM in ones that only wanted 100MHz. But only within that standard.
It's an idea that has some merit. I still use old Thinkpads that need DDR3 as what would have been prohibitively expensive when they were new is now cheap -- I have maxed-out 16GB X220 and T420 machines, and a near-full W520 with 24GB.
But not DDR4, and you can't max out old DDR2 machines as big DDR2 DIMMs always were expensive and still are.
Boards with both slots on them have started to be released due to this current ram squeeze. e.g. ASRock's H610M COMBO board[0] has 4 DDR5 and 2 DDR4 slots
[0]: https://asrock.com/MB/Intel/H610M%20COMBO/index.vn.asp#Overv...
I sort of kind of got around the high RAM prices by purchasing a micro center bundle deal to upgrade from my 5600X3D to a 9850X3D.
The total price was $699 for the processor, 32GB DDR5 RAM, and motherboard.
I’m not even sure how they do it. They’re basically discounting the CPU by $200 and the board and RAM by $50 each.
One theory I have is that inventory has piled up at retailers like Micro Center as consumer sales have dropped off a cliff. Perhaps consumer demand has been hurt so much that micro center’s cost basis for the RAM is still pretty low; it’s old inventory.
RAM prices have gone up but micro centers can’t magically sell their consumer ram to data centers. They are stuck selling it to consumers. So maybe they’re only willing to discount the price below market rate if you buy more stuff from them and buy in-store only. If they sold it for the old price they’d see customers coming in just to flip the memory on eBay.
I know the consumer RAM and motherboard brands are hurting and it’s only the companies producing the underlying chips that are benefiting.
The memory used by the Pi 5 is up 700% [2]!
Raspberry Pi are working the issue by releasing new memory variants that are cheaper[2].
Edit: You can still walk into a Microcenter and get Pi 5 16GB for US $289!
1. https://au.pcpartpicker.com/trends/price/memory/
2. https://www.raspberrypi.com/news/a-new-3gb-raspberry-pi-4-fo...