News for hackers. Stuff that matters.
Re:Mercedes‑Benz starts large‑scale production of electric a... by tclancy on Wednesday June 10, 2026 @09:15AM (#48475836)
Every plausibly cool electric car innovation leads me to the same thought: “5-10 years from now, the restomod potential will be wild once these come down in cost.” For this, I am imagining retrofitting a Pontiac Fiero to reduce as much weight as possible and see if extended flight becomes possible.
Re:Mercedes‑Benz starts large‑scale production of electric a... by throwway120385 on Wednesday June 10, 2026 @11:49AM (#48478169)
I'm going to replace the differential and the automatic transmission in my truck with a 4-cylinder engine and an electric transmission.
Re:Mercedes‑Benz starts large‑scale production of electric a... by ardit33 on Wednesday June 10, 2026 @11:37AM (#48478003)
Number 1 problem is battery weight though. Not electric motors.

I have a 84 w123 300D, and would love to add some more power to it. Lightweight hub motors would be great, but any decent size battery would be at least 200lbs+, which is hard to do on a old chasy.

Re:Mercedes‑Benz starts large‑scale production of electric a... by j_maffe on Wednesday June 10, 2026 @11:56AM (#48478275)
I think the cited weight loss comes from energy efficiency gains leading to less battery capacity needed.
Re:Mercedes‑Benz starts large‑scale production of electric a... by FabHK on Wednesday June 10, 2026 @12:02PM (#48478375)
Electric engines are already very efficient (particularly compared to internal combustion). If you go from 90% to 95% efficiency, you don't save much in terms of battery.

ETA: Internal combustion engines half a century ago had an efficiency of 20%, now they're at 40%. That cuts the fuel you need to carry in half. Electric engines are near 100%, and as I said, going from 90% to 95% efficiency cuts required battery by a bit more than 5%, so peanuts.

Re:Mercedes‑Benz starts large‑scale production of electric a... by ajuc on Wednesday June 10, 2026 @12:56PM (#48479199)
Going from 90% to 95% efficiency you're halving the thermal loses, thus reducing the need for cooling by half. It's a big deal.

Same with going from 99% to 99.5% efficiency. It still reduces the cooling needed by half.

Re:Mercedes‑Benz starts large‑scale production of electric a... by testdelacc1 on Wednesday June 10, 2026 @01:33PM (#48479742)
> reducing the need for cooling by half

But the motor is not the only thing that needs to be cooled. It’s mainly the battery, which has a narrow operating range. The power electronics that convert AC to DC also need to be cooled.

So you’re halving the cooling needs of the motor, which is nice but small compared to the other two. And even then, total cooling doesn’t impact range that much compared to warming the battery in cold climates.

I think you’ve overstated your case.

Re:Mercedes‑Benz starts large‑scale production of electric a... by ssl-3 on Thursday June 11, 2026 @05:18AM (#48488078)
Half is half.

If we halve waste-heat generation for a practical widget enough times, then we won't need liquid cooling for that widget at all. If the trend continues and gets good enough, then maybe we can get all the way to a complete passive-cooling snoozefest.

That's pretty boring, but boring is good. The systems we use every day without a thought because they boringly Just Work are, perhaps, our greatest successes.

Re:Mercedes‑Benz starts large‑scale production of electric a... by FabHK on Thursday June 11, 2026 @09:48AM (#48490295)
I was responding to

> I think the cited weight loss comes from energy efficiency gains leading to less battery capacity needed.

So, no, the efficiency gains of electrical engines do not lead to significantly less battery capacity needed.

Re:Mercedes‑Benz starts large‑scale production of electric a... by HDThoreaun on Wednesday June 10, 2026 @12:31PM (#48478810)
In the video the yasa guy said most of the weight loss is from getting rid of the yoke.
Re:Mercedes‑Benz starts large‑scale production of electric a... by parpfish on Wednesday June 10, 2026 @12:24PM (#48478694)
i know series hybrids aren't as efficient as parallel hybrids (thanks technology connections!), but i wonder if they'd be a good candidate for fun restomods.

drop in a tiny, powerful electric motor and a small battery (crammed in whatever location is best for weight distribution), and then wire up a little genny powered off your existing fuel tank that can jump in as a range extender

Re:Mercedes‑Benz starts large‑scale production of electric a... by coderenegade on Wednesday June 10, 2026 @07:11PM (#48484053)
Series hybrids can compete with parallel hybrids, because the full decoupling of the engine from the wheels claws back some of the efficiency you lose through the energy conversion. It's series-parallel hybrids they can't really compete with, because those are able to do the same trick, but they also lose less energy in conversion, because the engine does some of the heavy lifting.

Series hybrids are great for packaging, though. Parallel and series-parallel commit to certain packaging decisions like having a transmission, or a long, monolithic unit, because it's the mechanical coupling that buys them smaller motors and potentially better efficiency. Series hybrids don't care about any of that, so even though you have bigger motors and potentially higher losses, you have more freedom over where things go.

Personally, I think there's a massive untapped market in converting old cars to hybrid engines. You wouldn't try to upgrade the old engine, you'd design a smaller and more power dense package and rip all of the original gear out. Because electrification lets you cut the size of the engine down so aggressively, this is probably a feasible strategy. As you pointed out, series hybrids are probably best suited to this because of their packaging flexibility. As others have pointed out, there's tremendous potential there for replicating original driving characteristics using software and the electric motor. And if we're being honest, off-road vehicles probably should get rid of the transmission and low range, because electric motor torque is just better. As is, the potential for cars is enormous, but we're getting the worst possible outcomes thanks to legislation.

Re:Mercedes‑Benz starts large‑scale production of electric a... by tclancy on Wednesday June 10, 2026 @12:24PM (#48478702)
Yeah, my comment was hand-waving away a bit of the reality of it, but swap the Fiero engine for a battery and some of these and it's got to be close to achieving full lift.
Re:Mercedes‑Benz starts large‑scale production of electric a... by serf on Wednesday June 10, 2026 @12:33PM (#48478843)
its less hard than you'd think unless you're really going for long range.

for my sailboat I am getting rid of a 300lbs diesel and a 30gallon fuel tank with a 45lbs PMAC.

That means I have opened up about 465lbs for batteries.

Now, with a sailboat you're never truly out of range -- but the point stands : these things are so much lighter than ICEs on average that there is a lot of opportunity even with battery weight as it is (and it's getting better daily).

Re:Mercedes‑Benz starts large‑scale production of electric a... by kpil on Wednesday June 10, 2026 @03:10PM (#48481179)
I guess there's always the risk for a rig failure.

I looked a bit on doing the same, but came to the conclusion that it will be expensive to fulfil racing rules requiring the boat to be able to maintain speed for 5 hours ie around 25-30 NM range.

As it is now, I have about 500 NM diesel range on my boat, which is basically 3-4 days continuous runtime. Cutting it down to 25nm and 5 hours requires minimally 100kWh.

For a blue water boat, 500 NM is not quite acceptable, but can be fixed with jerrycans for a couple of dollars. An all electric blue water boat would clock in at an unrealistic 2MWh of batteries with a weight at least 20 metric tonnes. 10x the load capacity of my boat.

Re:Mercedes‑Benz starts large‑scale production of electric a... by dieselgate on Wednesday June 10, 2026 @05:47PM (#48483179)
> there's always the risk for a rig failure.

Don't forget rudder and keel - especially if sailing off the coast of western europe...

Re:Mercedes‑Benz starts large‑scale production of electric a... by BobaFloutist on Wednesday June 10, 2026 @03:46PM (#48481635)
This is silly, but I've also wondered if you could make a boat that can anchor and recharge batteries from ambient current, sort of like stationary regenerative braking. I'm sure it would take way too long to be worth it, but it was a fun idle thought.
Re:Mercedes‑Benz starts large‑scale production of electric a... by dieselgate on Wednesday June 10, 2026 @05:53PM (#48483234)
Perhaps the paddle wheel[0] will interest you, the spinning is used to calculate the velocity of the boat. Probably some other propeller or similar would be more practical - like a kicker motor that's easily lowered over the side. Just spitballing. I don't think it'd be worth it considering solar options. Even wind generators are not "super efficient" in comparison but I don't have data.

[0] https://www.westmarine.com/bg-h3000-paddlewheel-sensor-w-pla...

Re:Mercedes‑Benz starts large‑scale production of electric a... by BobaFloutist on Wednesday June 10, 2026 @08:39PM (#48484826)
I'm sure it wouldn't be worth it, because otherwise people would be doing it, it just seemed like a cool way to supplement solar or even to allow for indefinite underwater drones. Like, imagine a deep-sea research drone that could spit out an anchor and recharge whenever the battery got low. Almost certainly a case of "Cool, wouldn't really work well"
Re:Mercedes‑Benz starts large‑scale production of electric a... by lazide on Wednesday June 10, 2026 @01:16PM (#48479516)
Uh, car batteries are much heavier than most ICE’s. The curb weight on teslas’s are crazy high.

BYD can be lighter because they skip on safety gear and proper structural elements - in my experience.

Re:Mercedes‑Benz starts large‑scale production of electric a... by dotancohen on Wednesday June 10, 2026 @03:07PM (#48481140)

  > BYD can be lighter because they skip on safety gear and proper structural elements - in my experience.
I'd love to hear more about your experience with BYD. The ex just bought one and my kids ride in it daily. I helped negotiate the sale - I drive a Tesla and I'm very happy with the BYD.
Re:Mercedes‑Benz starts large‑scale production of electric a... by lazide on Wednesday June 10, 2026 @07:02PM (#48483988)
Brazilians got a bunch of them and they are super common in Brazil. Also common - broken suspension parts from driving them in Brazil.

Also, the only cars I’ve ever ridden on that the top of my head literally touches the headliner while sitting in the back seat. Other than that, they seem good?

Re:Mercedes‑Benz starts large‑scale production of electric a... by dotancohen on Thursday June 11, 2026 @02:34AM (#48486956)
Great to know, thanks. Israeli roads are typically well maintained, but I'll keep an eye out for suspension damage.

In this Atto 3, I've ridden in the back a few times and my head does not touch the headliner. I'm 170cm.

Re:Mercedes‑Benz starts large‑scale production of electric a... by lazide on Thursday June 11, 2026 @10:37AM (#48490970)
Yeah, I’m 182+ cm, so a bit bigger. It still surprised me. BYD Dolphin if I remember was the worse.

The suspension issues seem like a common theme though, they aren’t built as sturdily as most cars on that front.

Re:Mercedes‑Benz starts large‑scale production of electric a... by cyberax on Wednesday June 10, 2026 @04:25PM (#48482149)
Top-of-the-line NMC cells have energy density around 250Wh/kg at the pack level. The newer solid-state batteries can reportedly increase this to 400Wh/kg.

So a reasonable 75kWh battery pack is going to weigh around 300kg and in future around 200kg. This is... not a lot, actually. To a point where shaving off 20-30 kg from the electric motor weight is going to result in a noticeable performance/price difference.

Teslas also don't have "crazy" weight. Model 3 is 1700kg and a comparable (in size) Ford Focus is 1300kg.

Re:Mercedes‑Benz starts large‑scale production of electric a... by lazide on Wednesday June 10, 2026 @10:05PM (#48485413)
If you stop cherry picking the lightest Tesla, you’ll see what I mean.

400 kg == 881 lbs, and that is their lightest model with lowest range.

Re:Mercedes‑Benz starts large‑scale production of electric a... by cyberax on Wednesday June 10, 2026 @11:23PM (#48485872)
Model 3 LR with 360 miles of range is 1820 kg. Still nothing crazy.
Re:Mercedes‑Benz starts large‑scale production of electric a... by lazide on Wednesday June 10, 2026 @11:41PM (#48485961)
That is over 4K lbs, and more than an older model full sized Toyota Tundra.

Newer model Tundras are over 5k lbs, but that is also crazy.

Re:Mercedes‑Benz starts large‑scale production of electric a... by bjelkeman-again on Wednesday June 10, 2026 @04:46PM (#48482466)
BMW M3. Curb Weight: 3988 lb [1]

Tesla Model 3. Curb Weight: 3721 lb [2]

[1] https://www.caranddriver.com/bmw/3-series

[2] https://www.caranddriver.com/tesla/model-3

Re:Mercedes‑Benz starts large‑scale production of electric a... by lazide on Wednesday June 10, 2026 @07:07PM (#48484020)
The Model 3 performance model (more equivalent to the M3) weighs over 4K lbs. The model you are quoting is the lowest range and lightest of all Teslas.

The Tesla model S (actually more equivalent to the M3) is over 4500 lbs [https://www.edmunds.com/tesla/model-s/2026/features-specs/].

No one is realistically saving weight by switching to batteries. Because batteries are heavy for the energy and gasoline is hella energy dense.

Re:Mercedes‑Benz starts large‑scale production of electric a... by tonyarkles on Wednesday June 10, 2026 @12:39PM (#48478933)
Something to keep in mind with hub motors is that they’re unsprung weight, vs the battery pack is pretty much always sprung. While that’s not a huge differentiator for efficiency, it sure cuts down on the abuse the wheels and hub motors will experience
Re:Mercedes‑Benz starts large‑scale production of electric a... by WillAdams on Wednesday June 10, 2026 @12:56PM (#48479213)
Jeep/Stellantis certainly had problems trying to do this:

https://www.thedrive.com/news/jeep-tells-4xe-hybrid-owners-t...

Re:Mercedes‑Benz starts large‑scale production of electric a... by dotancohen on Wednesday June 10, 2026 @03:05PM (#48481113)
Reducing the motor mass by 200 kg means you've just removed 10% of the weight of the vehicle. You could theoretically now reduce the battery pack by 10% as well.
Re:Mercedes‑Benz starts large‑scale production of electric a... by N1H1L on Wednesday June 10, 2026 @03:26PM (#48481361)
Not true. The CdA (coefficient of drag multiplied by frontal area) matters far more for range than the weight for range. That is a smaller EV, which may very well be heavier can have a higher range and efficiency.
Re:Mercedes‑Benz starts large‑scale production of electric a... by dotancohen on Wednesday June 10, 2026 @03:52PM (#48481689)
The Cd matters for highway driving, but weight is the dominating factor for city driving.
Re:Mercedes‑Benz starts large‑scale production of electric a... by xethos on Wednesday June 10, 2026 @04:58PM (#48482620)
As efficiency improves across motors and inverters, wouldn't regen make CoD matter more, possibly tilting it to the dominant factor again?
Re:Mercedes‑Benz starts large‑scale production of electric a... by thfuran on Wednesday June 10, 2026 @06:29PM (#48483640)
I don’t think there’s a whole lot of room for improvement there.
Re:Mercedes‑Benz starts large‑scale production of electric a... by dotancohen on Thursday June 11, 2026 @02:38AM (#48486994)
Regen recoups about 80% of the kinetic energy, and it is already up close to the theoretical physical limit without switching to exotic materials.

Cd will never be the dominating factor at speeds which do not produce significant aerodynamic drag.

Re:Mercedes‑Benz starts large‑scale production of electric a... by xethos on Friday June 12, 2026 @09:29PM (#48511425)
> Cd will never be the dominating factor at speeds which do not produce significant aerodynamic drag

That helped it sink in, thank you

Re:Mercedes‑Benz starts large‑scale production of electric a... by anonymars on Friday June 12, 2026 @10:46PM (#48512247)
Remember also that tires (deformation) and the like sap energy too
Re:Mercedes‑Benz starts large‑scale production of electric a... by dredmorbius on Wednesday June 10, 2026 @06:24PM (#48483591)
Unsprung mass is a concern, though, and being able to put motors in the wheel has benefits.
Re:Mercedes‑Benz starts large‑scale production of electric a... by gloxkiqcza on Wednesday June 10, 2026 @12:21PM (#48478659)
Here’s a build series of an ex-Apple/NASCAR/Tesla engineer turned YouTuber swapping Tesla Model 3 drivetrain to a 50s Jag.

https://youtube.com/playlist?list=PLoTU9_iCGa6i_C38pwQyg0pBG...

Re:Mercedes‑Benz starts large‑scale production of electric a... by lobf on Wednesday June 10, 2026 @01:28PM (#48479659)
As an antique BMW enthusiast, I know some people that have swapped electric motors in to 2002s and 2000 CSLs and they said it was actually a pretty disappointing experience. You lose the vintage driving experience entirely.
Re:Mercedes‑Benz starts large‑scale production of electric a... by waffletower on Wednesday June 10, 2026 @02:58PM (#48481016)
Yeah, it was also so sad to lose the vintage brain damage when we migrated away from leaded fuels: https://dupri.duke.edu/news-events/news/20th-century-lead-ex...
Re:Mercedes‑Benz starts large‑scale production of electric a... by lobf on Wednesday June 10, 2026 @04:08PM (#48481902)
wtf are you talking about? I drive one of these cars every day (that I need to drive, which isn’t that often really) without leaded gasoline.

It’s the punchy little m10 motor, 4 speed transmission, and incredibly low curb weight that make these cars fun to drive. You lose all that with an electric conversion.

As an aside, the most powerful F1 engine ever put on the track was made by modifying the little 4-banger m10 found in the BMW 2002. Fun fact.

Re:Mercedes‑Benz starts large‑scale production of electric a... by alt219 on Wednesday June 10, 2026 @04:42PM (#48482416)
> As an aside, the most powerful F1 engine ever put on the track was made by modifying the little 4-banger m10 found in the BMW 2002. Fun fact.

Supposedly BMW lacked a dyno that went high enough so it's an educated guess what the actual hp was, but definitely over 1,300hp... from a 4-cylinder (turbo charged, and only lasted a few laps, but still) engine!

Re:Mercedes‑Benz starts large‑scale production of electric a... by xethos on Wednesday June 10, 2026 @04:56PM (#48482594)
I'd throw in the manual gearbox, the noise, vibration, smell, and being able to see the mechanical workings as well. We can get a punchy, lightweight vehicle with an EV conversion, but as you've heard from others, that leaves something to be desired
Re:Mercedes‑Benz starts large‑scale production of electric a... by lobf on Wednesday June 10, 2026 @07:38PM (#48484313)
>I'd throw in the manual gearbox

AKA the 4 speed transmission I mentioned :)

But yes, the vibration, sound, and feel of the incredibly simple (as in stripped down, not unsophisticated) mechanics around you all very much contribute to the special feeling of driving these cars.

My 1976 BMW 2002 is actually my first car. I used to drive it to high school more than half my life ago, and I still drive it today. I’ve driven some other classic cars, luxury and sport, and simply nothing feels like a 2002. Just a beautiful, balanced, timeless design.

Re:Mercedes‑Benz starts large‑scale production of electric a... by Qwertious on Wednesday June 10, 2026 @07:00PM (#48483969)
I'm pretty sure the subtext of that comment was that the benefit of electric motors in retro cars is the emission reduction (and possibly cost and maintenance reduction), and not improved specs/experience. Saying "ye but it worsens the experience" misses the point.
Re:Mercedes‑Benz starts large‑scale production of electric a... by lobf on Wednesday June 10, 2026 @07:34PM (#48484274)
But this is a thread about modifying 50-70 year old cars with electric drivetrains.

There are so few of these cars on the road anymore that I think very little progress is to be made on emissions levels by converting them to electric, especially when you consider that you’re ruining the driving experience.

Re:Mercedes‑Benz starts large‑scale production of electric a... by trainsarebetter on Wednesday June 10, 2026 @06:27PM (#48483624)
This is happening now in the openinverter.org community
Re:Mercedes‑Benz starts large‑scale production of electric a... by nobrains on Thursday June 11, 2026 @01:38AM (#48486601)
From the animation: "Torque grows with the cube of diameter"

That seems like a pretty cool cheat-code to get more power. Perhaps it will mean you will start having cars with more distance from the ground to accommodate the large dia motor wheels.