News for hackers. Stuff that matters.
Re:When Every Network is 192.168.1.x by rtkwe on Wednesday January 28, 2026 @02:32PM (#46800396)
I recently just changed my default subnet to 10.X.Y.... rolling two random numbers to make it highly unlikely my home subnet through wireguard would conflict with the subnet where I am connecting from.
Re:When Every Network is 192.168.1.x by trollbridge on Wednesday January 28, 2026 @02:56PM (#46800705)
I just use /24s in the lower-middle range of 172.16. Very unlikely to have a conflict there.
Re:When Every Network is 192.168.1.x by dmd on Wednesday January 28, 2026 @03:29PM (#46801080)
My (very large) corporate network uses 172.16 and 10. heavily, which has lead me to set my docker/daemon.json default-address-pools to 84.54.64.0/18, as it's very unlikely we need to communicate with any IPs in Uzbekistan.
Re:When Every Network is 192.168.1.x by dijit on Wednesday January 28, 2026 @03:41PM (#46801210)
So, uh.

I kinda don't want to share this because:

A) it's a bad idea

B) it means it will be less unique

and

C) I got teased for it a long time ago by my other nerd friends.

But the US DOD has huge blocks of prefixes that it doesn't do anything with, presumably they use it for internal routing so every device they have could publicly route without NAT..

One of those prefixes is 7.0.0.0/8.

My home network uses that. I have never had an issue with S2S VPNs.

However, there have been a few bits of software (pfsense for example) which have RFC1918 hardcoded in some areas and treat it like a public network and overwriting it means doing the entire network setup manually without the helping hand of the system to build-out a working boilerplate.

Re:When Every Network is 192.168.1.x by x0 on Wednesday January 28, 2026 @03:55PM (#46801359)
In this vein there's also 3 TEST-NETs, all /24 but still useful. I've been known to use TEST-NET 1 for Wireguard: 192.0.2.0/24. The other two are 198.51.100.0/24 and 203.0.113.0/24.

There's also 198.18.0.0/15, Wikipedia says it's "Used for benchmark testing of inter-network communications between two separate subnets"[1]. Use this if you really want to thumb your nose at the RFC police.

[1] https://en.wikipedia.org/wiki/List_of_reserved_IP_addresses

Re:When Every Network is 192.168.1.x by pcarroll on Wednesday January 28, 2026 @04:07PM (#46801516)
I actually looked at using those before the CGNAT range, but many of those blocks have been returned to the public Internet.
Re:When Every Network is 192.168.1.x by fuzzfactor on Friday January 30, 2026 @11:49AM (#46826685)
When I separated my scientific instruments from IT, I went to fixed IP and set each device to 192.A.B.x where x is different for each instrument or PC. And A & B are for my lab only, but definitely not the same as the "generic" address range IT is using.

One day somebody working days or nights "helpfully" plugged one of IT's loose office-machine-network cables into one of my little lab ethernet switches which had a vacant spot :\

With separate IP subnets it really kept the traffic from crossing, no damage was done, and nobody ever knew until a PC configured for DHCP was plugged into the lab network, and their router wanted to autoassign an IP address to it.

Re:When Every Network is 192.168.1.x by pclmulqdq on Wednesday January 28, 2026 @03:20PM (#46800977)
I often use 172.31/16 for subnets and have never seen a conflict. I have seen 172.24 and 172.16 used before, though.
Re:When Every Network is 192.168.1.x by EvanAnderson on Wednesday January 28, 2026 @03:18PM (#46800957)
I find a lot of Docker containers using subnets inside 172.16.0.0/16.
Re:When Every Network is 192.168.1.x by notpushkin on Wednesday January 28, 2026 @03:32PM (#46801105)
Probably for the same reason – 172.16/12 is not as widely used for other networks :-)
Re:When Every Network is 192.168.1.x by OptionOfT on Wednesday January 28, 2026 @04:20PM (#46801684)
Do you run Docker? Because I remember having to VPN out to a client that used that range, and it caused conflicts where our docker containers couldn't reach the client side to fetch data.

Docker defaults to 172.16.0.0/16.

Re:When Every Network is 192.168.1.x by pcarroll on Wednesday January 28, 2026 @04:33PM (#46801866)
We chose Go as the development language. Go produces statically compiled binaries that include all dependencies. The only external deps are wireguard, nftables, nmap, etc. All easy stuff. So we have no need for Docker. We publish binaries for ARM64 and AMD64. Avoiding Docker has made it much easier to work with.
Re:When Every Network is 192.168.1.x by doubled112 on Thursday January 29, 2026 @01:25AM (#46806507)
I had this happen at home. I'm not convinced it was a good idea to choose default subnets as /20.

It was pretty easy to cause myself problems with Docker compose. Eventually I run out of subnets in the 172.16 range and it happily created subnets in the 192.168. range. Some of them overlapped with subnets on my LAN.

Re:When Every Network is 192.168.1.x by trollbridge on Thursday January 29, 2026 @09:01AM (#46810319)
Yes, we use Docker (or podman) but generally never rely on Docker’s internal address ranges.
Re:When Every Network is 192.168.1.x by pcarroll on Wednesday January 28, 2026 @04:28PM (#46801785)
This works fine for your end. But the issue we are addressing is on the other end, when you don't control the network and need to reach devices. If all customer sites are running rfc-unroutable blocks, you eventually encounter conflicts. And the conflict will likely be with the 2nd one you try.
Re:When Every Network is 192.168.1.x by rtkwe on Friday January 30, 2026 @10:58AM (#46825958)
I mostly wireguard in from my work's guest wifi and people's homes. The first I don't have access to anything internal anyways and it doesn't conflict and the latter mostly use default 192.168.1.0/24 so there's no conflicts I've hit there so far.
Re:When Every Network is 192.168.1.x by ivanjermakov on Wednesday January 28, 2026 @07:29PM (#46803925)
I subtly remember that 10.x.y address space is widely used by CGNATs.
Re:When Every Network is 192.168.1.x by greyface- on Wednesday January 28, 2026 @11:50PM (#46805923)
CGNATs should be using 100.64/10 instead of 10/8 to avoid this problem, but I don't doubt that there are significant deployments on 10/8 anyway.
Re:When Every Network is 192.168.1.x by zinekeller on Thursday January 29, 2026 @03:56AM (#46807534)
The IETF really dragged their heels on CGNAT because they thought that IPv6 is easy™ (of course not, it's intentionally designed not to be "almost the same but wider" but include unworkable stuff like Mobile IPv6[1] which is just a fancy VPN) until they were forced to allocate 100.64.0.0/10 because some ISPs are not just using 10.0.0.0/8 but also US-DoD addresses (especially 11.0.0.0/8, because it's basically 10.0.0.0/7) as "private" addresses.

[1] Not IPv6 on mobile devices but a fully-owned IPv6 range that is supposed to be the address for a device regardless of where it is, see RFC 3775

Re:When Every Network is 192.168.1.x by pcarroll on Thursday January 29, 2026 @03:56PM (#46816469)
I wanted to use 11.0.0.0 and call the company "Eleven," but by that time the DOD had given up the block for general use... GCNAT is perfect.
Re:When Every Network is 192.168.1.x by rtkwe on Thursday January 29, 2026 @09:29AM (#46810660)
Are those usually visible to clients sitting behind routers though? I'm not super familiar but the things I'm seeing make it seem like that should only be visible IPs on the internal network of carriers which is not a place I am ever connecting from.
Re:When Every Network is 192.168.1.x by 9dev on Thursday January 29, 2026 @03:40PM (#46816263)
I’ll never not use 10.0.0.0/24 for the sole benefit of being able to collapse the zero and go ping 10.1.

Plus, most network admins think of you and aren’t so bold as to use the first subnet in the range, so I never had problems yet :)