The other option is to just build things that need to be built.
1. US government contracting preferentially selecting over the last 75 years for people who are used to working slow and dotting every i / crossing every t -- i.e. business as usual
2. Regulations during business as usual slowing down the maximum throughput of processes
That isn't to say that other people don't still exist in the US, just that they're not currently at government contractors, because the government hasn't prioritized their core competencies (speed).
It's entirely possible that, similar as was done to military command staff at the outbreak of WWII, the US rewrites its regs, fires people who are incompetent at working at a faster pace, and recognizes and elevates talent.
Unfortunately the current executive branch, while tearing down regulations, then has more interest in profiteering and nepotism than truly pushing exceptional engineers.
The issue is the vetoes are layered and entrenched.
Some EPA rules makes it effectively impossible but are to varying extents actually protecting the environment, so you'd want someone who knows what they're doing to rewrite them in a way that can do both things at once. Zoning rules prohibit anyone from operating a mine there or building housing for the workers near the mine and local NIMBYs control the local zoning boards. Various OSHA regulations, state and federal mining rules, transportation rules, etc. are in the same state as the EPA ones.
There isn't any one place you can go to unbotch it all at once but getting them each to do it individually is non-trivial unless your plan is to just vaporize them all simultaneously.
NASA put a human on the moon in less than 10 years in the 60s, and today it's taken then a little longer than 10 years to get a single unmanned launch up with SLS.
That's a big part of the problem. The vetoes have evolved to resist political reformists.
Most of these regulations come from unelected administrative agencies. You can swap out the President of the United States and they're still mostly the same people. The President can issue them general orders but a single elected individual doesn't have the bandwidth to drill down into all the specifics in all the agencies, even though that's what it'd take to fix it.
The nearest you could come to it would be to actually vaporize them -- stop doing these things at the federal level at all. It was never intended to be that way, that's why the federal executive branch has only one elected official. Instead you have the states do it, which a) gives you a house cleaning because they have to start over and b) gives you 50 chances to get it right instead of just one so that one bad regulatory choice can't destroy an industry nationwide.
But that's just a major problem, not the only problem. Zoning is nearly as bad, maybe even worse, but is local. Because that one isn't caused by unaccountability, it's caused by NIMBYs. For that you can't just limit the powers of the federal government, you even need to restrict the local governments from doing that.
That one would be easy to fix, on paper -- require that in any 100 square miles of land area at least 50% of the land can't prohibit anything other than noxious industrial uses, meaning you can build mixed commercial and residential with unlimited density, and in any 10,000 square miles of land area, at least half of that 50% (i.e. 25%) has to be completely unzoned, meaning you can build literally anything. Then the people who want single family homes can have the other 50% of the land area, just not the >90% it currently is in many areas. But now actually do that.
But if the project is fast tracked as a national security issue?
This was identified as national security issue over a decade ago.
I am very skeptical. The cost of buying from non-chinese sources is not going to be billions of dollars for some kilos of magnets. There are other options e.g. https://mpmaterials.com/ or https://www.neomaterials.com/ .
Sure. There's magnets everywhere. In speakers, in EVs (motors, actuators), pumps, wind turbines whatnot. Military use has to be a tiny tiny fraction. Like less than 1% or even less than 0.1%. These are not expensive bits- it's just China makes them cheaper.
China seems to own about 90% of the market. So for sure we're not going to be able to replace 90% of the market in a blink. But that 90% isn't going away, China is still selling EVs and other products. The 10% is plenty for military use, even if the prices go up a lot (military bits are usually mil-spec and expensive anyways). There's definitely economic leverage there but I call bs on the military angle.
( https://www.politico.com/news/2022/10/07/pentagon-f-35-deliv... is related )
What does sound plausible is that some mil-spec actuator (let's say a pneumatic actuator or a motor) happens to have a magnet from China in it. That is not a big deal.
I find it hard to believe that a US mechanical engineer working on the F-35 part would spec an alloy that is only available from China as some fundamental part of the design. E.g. a wing, or body panels, etc. I don't have direct experience but from knowledge working in other manufacturing industries engineers tend to prefer locally available alloys as they're more familiar with their properties and they can easily get them for prototyping purposes Now if the entire wing of the F-35 is subcontracted to China then you'd expect Chinese alloys in that wing. Many products are subcontracted to China and so it's no surprise they'll have Chinese made magnets, alloys etc. But weapons systems are generally not. High end weapons systems like the F-35 may have some secret materials in them that are designed as part of that program and manufactures locally. I guess it's theoretically possible they use some raw materials from China but those being irreplaceable at any cost (when you're talking billion dollar systems and relatively low quantity) also doesn't pass the smell test.
What would settle this question is us getting a BOM of the F-35 with the specific parts/materials that are a concern. We're obviously not gonna get that. Alternatively some sort of reliable source, like head of engineering for one of these companies. I don't think we've seen this either.
The simplest explanation is that saying this impacts something like the F-35 sells more newspapers or advances some agenda. I'd buy the economic leverage argument; just not the national security one. Not without more evidence.
Think about much bigger chunks of semiconductor industry where TSMC represents 100% of world's capacity for certain most advanced production nodes.
Why hasn't this been done? We first knew China/rare earths was a security and strategic issue at least 15 years ago.
One has little sympathy for the US when it's been sitting idle on its hands doing SFA for all that time.
We are so deep in AI and super computing or wasteful server side computing that we forget that lower end chips are in absolutely everything. And China can produce those just fine.
Then you need this for all the various REEs for the final goods.
You don't just build a mine and off you go. The US gave up a lot of strategic supply chains a long time ago.
This was identified as a threat back in 2015. The DoD has been buying big stakes in non-Chinese mines, and ramping up the MP mine in Nevada.
Could it be disruptive if China chokes off supply? Sure. Is it an existential threat? No
Probably because that alternative was to build next gen programs to be less performant, and can't settle when platform last 30/40/50 years now.
The problem isn't lol US start making fancy magnets. The problem is lol modern US MIC hardware performance/overmatch is built around access to ABUNDANT fancy magnets that can only be built at scale/cost via processes PRC pioneered because they have (relatively unique) access to geologicly bound ionic clay deposits in PRC backyard. That capability doesn't exist in past history. US+co never had it. And if US can't replicate it, the entire current tranch of military hardware based on size, weight, (SWaP) of pushing highend PRC magnetics to their limits (motors of missiles, planes, precision motors, aesa radars, sonars), might not even make operational sense.
Then strategic delimma is budgetting 100s of billions into retrofitting/integrating of alternative components with slightly different (potentially inferior) performance characteristics. Or trillions in new programs based on alternative material assumptions. That's the real killer. Moving away from PRC HREE dependency =/= make more rocks, but if make more rocks no worky, or settle with making slightly different/less performant rocks, then have to redesign/reengineer/requalify the entire force structure over decades.
For strategic reasons the Military budgets enormous funds on items that may or may not pay off, it's a recognized gamble that all militaries engage in out of deemed necessity.
Why "potentially inferior performance", are you suggesting the US doesn't possess mining and chemistry expertise that are up to Chinese standards?
Just because the US hasn't needed to process REs to certain standards or requirements in the past doesn't mean it's not capable of doing so.
No, the opposite. Most militaries import equipment / are takers. Most militaries not engaged in very expensive R&D and capex to maintain overmatch. Most militaries buy off the shelf from vendors and make do because defense budget not priority unlike US.
US military budget while enormous is not unlimited, already experiencing extreme capitilization issues across the force, active naval hulls, airframes age etc are all in very bad state. 100's of billions buys a lot of hardware, but more importantly non trivial DELAYs a lot of hardware if there needs to be reengineeering.
>up to Chinese standards >it's not capable of doing so
A bunch of the HREE US _NEVER_ had industrial process knowledge for commercial mining. PRC accumulated 20+ years of R&D, build out workforce, infra, supply chains. Do I think US replicate part of that / hit PRC quality AND quantity in short time, i.e. before have to start substituting components if PRC locks down REE hard. Serious doubts, i.e. dysprosium, terbim for heat resistent magnets were lab tech and ONLY PRC has ever extracted at scale, and it's application is ONLY because PRC can extract them at scale. It's like saying PRC has lab EUV technology too, but doesn't mean they can do commercial scale, or even strategic scale unlike ASML who has decades of R&D and tacit knowledge. There's is zero reason to believe US is remotely capable of spinning up scale of HREE operation required in critical timeframe.
Now keep in mind PRC HREE is ONLY viable because they have specific geologic deposits that are economic to extract at scale. US does not have those deposits, US to break hard rocks (vs PRC leech from soft clay), it's magnitudes less output, if US needs to spend 100X more effort for same unit of HREE, it may not even be strategically sustainable, see how PRC has more shale than US but can't extract it economically, because it's very deep so doesn't even try and ended up pivoting to entirely different tech stack - renewables - despite US wanking about blockading PRC oil SLOCs for decades.
This is like when people say but US was industrial powerhouse in WW2, US can mobilize again. But the reality is US industrial capacity was 5/5 in WW2, but PRC has changed the denominator to 50. There is a lot of things US can't do now. Not that it can't do _eventually_ but can't do on timelines required. MIC overmatch is about doing things in strategic relelvant timeframe, i.e. we're talking about HREE that goes into sensors, aelectronic warfare actuators for highend aviation/missiles performance, the bread and butter of next gen platforms.
At some point, the time constraint may compel US it's strategically better off basically retooling to different componets with different material science - that's decades + trillions pivot. Presumably short term stopgaps would be less performant since US MIC R&D does make effort to use leading edge for overmatch, whatever alternative they switch to will be second best. But again the real killer is every part of this is time friction, measured in decades that disrupt the entire procurement cycle, split force design, it's not problem you can throw money at - which again even US DoD/W seemingly doesn't have... or else US wouldn't be going through capitalization squeeze in navy/airforce. This translates to US overmatch declining, regional force balance / deterence changing, expose US posture to decades of vunerability. It's ripple of technical turn strategic issues US doesn't have the TIME to figure out in short/medium term, and arguably money, at least without taking from elsewhere, which in DoD/W case is going to be procurement, because most other costs fixed.
That's BS. If the US considered the shortage important enough and really wanted to then it could do so in a flash.
If you doubt this just look at how the US turned its manufacturing around in WWII. The speed of the production ramp-up was truly amazing.
That's not a call for Communism, during WWII the US was essentially under a command economy and manufacturing companies made good profits—some fortunes. Furthermore, the US government was run by very bright people such as Vannevar Bush and Harry Hopkins (they must be rolling in their graves at today's shambles).
The US doesn't have to go to such lengths today but it could partially do so by mandating that certain critical/strategic industries be directed to produce strategic goods and materials.
The real issues are lack of political will and stupid ideological differences.
If this is a problem now then tough. Decades ago this would have been seen as a major strategic/security issue.
One can have little sympathy when security is deliberately traded away for a few dollars extra profit.
BTW, rare earths aren't exactly rare and the US has enough chemical knowhow how to refine them. Sorry, any shortage is of the US's own making.
We've now reached the point where the strategic and economic importance of REs is enough to overcome those impediments/objections. As I mentioned earlier, this was very predictable at least 15 years ago. It's not lack of foresight but rather lack of political will—thus there's been no cogent or effective forward planning policy in place.
As for all those EV/consumer and Mil products its not raw RE being utilised but speciality alloys that are worked to produce whatever the material science requires , where once again there one industrial producer.
Thats what the whole chain part of supply chain comes in , similar to why its easier and cheaper to manufacture iphones in Schenzen; all the refining/alloys/smelting is in one location with the skilled workforce and advanced methods that have been iterated over the last 30 years.
As to what % go into mil products, several kilos of this several of that forged into speciality alloys at commodity prices vs doing it at artisinal mining prices and those billion dollar weapon systems become tens or hundred billion dollar systems.