Arc furnaces tend to be first in line to voluntarily shutdown to deal with grid instability, or projected power shortages. Network operators will basically pay them equivalent amount of money as they would to buy electricity, if the furnace operator is happy to shutdown at a moment’s notice.

After, to a power grid, removing large loads are functionally equivalent to adding additional generation. So if you’re operating an arc furnace, and can shutdown quickly (which arc furnaces can), then grid operators will pay you for privilege of being able to shut you down at moments notice, and then pay even more for the electricity you’re not consuming, if the grid is forced to call upon that additional “capacity” due other issues on grid.

I’m not sure if arc furnaces today vary their usage in direct response to variable electricity prices through the day, rather than only acting as emergency ballast to be jettisoned in an emergency. But I would be very surprised if they didn’t, they’re a large enough load that they’ll have coordinate the usage with their local grid, and large enough that shifting the usage pattern to avoid high cost peaks would save them a very material amount of money.

there's some footage in the documentary i linked of coordinating the usage with their local grid before turning the arc furnace off for half an hour (because the next load of scrap was delayed)

[deleted due to severely condescending comment below]

it's good that you're starting to learn some of the basics of how real-time energy markets work, but most of the things you have said are unfortunately nonsense

What an exceptionally unconstructive and condescending comment.

Deleting yours removes any hope of a conversation.

Didn't seem like there was much hope of that with the response I got anyway. I'm not here to take condescending comments with no substance (i.e. pointing out why it supposedly was nonsense), so I decided it was better to remove the comment and move on.

Okay but this way it's hard not to treat it as if you did in fact post nonsense.

And whether you said something right or wrong I at least would have liked to see it. Especially when it gets a callout like that.

> Okay but this way it's hard not to treat it as if you did in fact post nonsense.

All the more reason for me to stop engaging, isn't it?

The gist of it was that nuclear power is insufficient in and of itself because it is hard to regulate output to match grid requirements, and therefore that we need both nuclear and renewable energy sources, not just one or the other. Maybe I'm wrong, maybe I'm not, I'm out of here either way.

> All the more reason for me to stop engaging, isn't it?

No, I don't think so. The skepticism all comes from your initial comment, not the followups.

> The gist of it was that nuclear power is insufficient in and of itself because it is hard to regulate output to match grid requirements, and therefore that we need both nuclear and renewable energy sources, not just one or the other. Maybe I'm wrong, maybe I'm not, I'm out of here either way.

Oh well that specific point is wrong. Modern nuclear can adjust its output quickly and within a wide range if the operator wants it to. We could run a 100% nuclear grid. The fundamental issue at hand is price, not capability, because reducing output makes the cost per watt go up.

also modern nuclear is probably too expensive to compete with batteries; steam turbines aren't getting cheaper fast enough, while both batteries and power semiconductors are improving at a staggering rate. there's no reason to expect that nuclear power will constitute any percentage of the power grid at all 20 or 40 years from now. 10 or 100 years from now, yes

if you want to read plausible misconceptions about electric grid operations and stability you can get gpt-4 to generate an unbounded stream of them

oddly enough, that's what i thought about your now-deleted misconception-filled comment, but i thought maybe it was worthwhile to try to engage positively

the normal kind of arc furnaces are shut down many times a day; it's a batch process, not a continuous one

Do they operate 24/7?

Even if it is batch process, going from 24 hours to 8 hours is like tripling plant cost vs productivity.

tripling capex vs. productivity, yes, but maybe if capex is small compared to opex, that's a worthwhile tradeoff. the one particular plant i was able to find the answer for does operate 24/7

don't forget wind. there's lots of wind power and very low power consumption at night. it's probably more like 22 hours to 16

They generally will run the cheapest electric rates. They commonly run only the overnight shift when electric is cheapest - it is worth paying the employees that extra money to work the overnight shift. They commonly shutdown the entire month of December for yearly maintenance - when Christmas lights add additional electric demand. They coordinate with the power company for other shutdowns.

You may be thinking of aluminum plants which can’t be shut down and restarted without significant damage, but they are indeed still throttled up and down. In that case it’s electrochemistry at high temperatures to strip the oxygen off of aluminum. If it gets cold the apparatus gets damaged, but it can be throttled down a significant percentage.

thank you, that is almost certainly what they were thinking of

how much do they get throttled up and down, and how frequently? i'd like to read more about this