News for hackers. Stuff that matters.
Re:How I Replaced Deadly Garage Door Torsion Springs by kelnos on Monday March 18, 2024 @07:10PM (#39751156)
If the garage door opener breaks, or the power is out, many people might have a really tough time opening the door manually without those springs. They might not be able to even do it at all.

It is still, of course, a valid question to ask if it's worth having dangerous springs up there all the time for the rare event of the opener being inoperative.

Or maybe we just shouldn't have doors that are that heavy?

Re:How I Replaced Deadly Garage Door Torsion Springs by QuercusMax on Monday March 18, 2024 @07:47PM (#39751440)
They are surprisingly heavy, which is why you need such a beefy spring. When my spring broke a decade or so ago, I wasn't able to lift the door on my own, and with the assistance of my wife we were just barely able to lift it. Looks like they can easily be 200-500 lbs depend on materials (steel isn't light, but it's lighter than wood for this application), and I guess the issue is that you have to lift hundreds of pounds straight up against gravity.
Re:How I Replaced Deadly Garage Door Torsion Springs by codethatwerks on Monday March 18, 2024 @08:21PM (#39751654)
Could it be made of lighter material. Ironic how the garage door is perhaps the most armoured part of a house
Re:How I Replaced Deadly Garage Door Torsion Springs by tomoyoirl on Monday March 18, 2024 @09:04PM (#39751941)
It’s less ironic in areas subject to hurricanes. They have a very large area. One of the most damaging possible sequences in a hurricane is when the garage door blows in, then the wind just blows the whole roof off.
Re:How I Replaced Deadly Garage Door Torsion Springs by nradov on Monday March 18, 2024 @08:37PM (#39751763)
Lighter materials that would provide the same level of durability, security, insulation, and fire resistance would be significantly more expensive. No one wants to pay for that.
Re:How I Replaced Deadly Garage Door Torsion Springs by Spivak on Tuesday March 19, 2024 @10:52AM (#39756316)
But the other 3 walls of your garage are wood?
Re:How I Replaced Deadly Garage Door Torsion Springs by bumby on Wednesday March 20, 2024 @12:20PM (#39768686)
The other three walls don't have the same demands put on them. For one, you wouldn't need to lift them by hand, so they can be practically as heavy as you want.
Re:How I Replaced Deadly Garage Door Torsion Springs by hnick on Monday March 18, 2024 @10:14PM (#39752312)
I guess it depends what you make it of, doesn't it? Growing up I had a typical corrugated roller door, it was very easy for me as a kid to open it with some of the weight supported by the roller. I think they have springs but they're not as extreme as the tilt/section doors. Apparently you can throw a motor on the end similar to roller blind kits, and they wouldn't have to deal with as much weight as a spring-based door. Of course, I do not live in an extreme weather area (yet).
Re:How I Replaced Deadly Garage Door Torsion Springs by rdtsc on Monday March 18, 2024 @11:32PM (#39752685)
I lifted mine but probably shouldn't have. I kept sticking stuff under it, a crate, a stool, until I was able to put two step ladders under. The higher it goes, the lighter it becomes since now the horizontal roller starts to take on some of the weight. But it's super dangerous.

When the spring broke, one of them snapped, and the quickly dropping door snapped the other one as well. Surprisingly it didn't damage the door itself. It's a double door so had two springs.

I toyed with the idea of replacing the springs myself but after asking around doing a few searches decided it's best I pay a professional to do it.

Re:How I Replaced Deadly Garage Door Torsion Springs by 7thaccount on Monday March 18, 2024 @07:54PM (#39751479)
My garage door is no longer connected to the opener, I just swing it up manually twice a day. My kid can do so as well without issue. Maybe mine is lighter.
Re:How I Replaced Deadly Garage Door Torsion Springs by cwillu on Monday March 18, 2024 @08:13PM (#39751596)
The opener doesn't support the weight of the door, that's the springs.
Re:How I Replaced Deadly Garage Door Torsion Springs by selcuka on Monday March 18, 2024 @08:05PM (#39751548)
Are the springs still in place? If yes, then they are still doing most of the work.
Re:How I Replaced Deadly Garage Door Torsion Springs by 7thaccount on Monday March 18, 2024 @10:22PM (#39752351)
They exist, but are not connected to anything. It just swings on the rollers.
Re:How I Replaced Deadly Garage Door Torsion Springs by ianburrell on Monday March 18, 2024 @10:38PM (#39752421)
The springs are different than the opener. I don’t think the springs can be disconnected, they have to be carefully removed. You would know if they were or were broken, because you couldn’t open the garage door.
Re:How I Replaced Deadly Garage Door Torsion Springs by sokoloff on Monday March 18, 2024 @10:47PM (#39752470)
Side-mounted extension springs can be easily disconnected with the door up (and ideally clamped). GP describing them as "not connected to anything" makes me suspect that they're extension springs, which can be easily/casually inspected and determined to be not hooked up to anything. Torsion springs you probably need to look to see the marks on the spring wind up (or make a straight chalk mark on it and see if that twists uniformly).
Re:How I Replaced Deadly Garage Door Torsion Springs by rdtsc on Monday March 18, 2024 @11:38PM (#39752714)
That's why it's surprising how heavy the doors are. Springs make it very easy open and close the garage doors with one hand, so we get used to it. When springs snap, (they all have a limited lifetime) the doors suddenly feel surprisingly heavy.

Don't know your situation but I'd dare to suggest fix the opener, simply because it means not standing right underneath, you or your kid, when the springs snap. It was quite startling when that happened.

Re:How I Replaced Deadly Garage Door Torsion Springs by LoganDark on Monday March 18, 2024 @07:44PM (#39751411)
> many people might have a really tough time opening the door manually without those springs

I think that would be most people. Who can lift over 450lbs from the ground?

Re:How I Replaced Deadly Garage Door Torsion Springs by codethatwerks on Monday March 18, 2024 @08:24PM (#39751677)
450lbs but because it is not straight up but up and back that probably gives a 2-1 leverage so 225lb or 100kg. using your legs to lift it would be in the realm of a regular male weight trainer but not the average jo or jane.
Re:How I Replaced Deadly Garage Door Torsion Springs by manfre on Monday March 18, 2024 @08:42PM (#39751797)
Your 2-1 leverage assumption is wrong. The first 1' is full door weight plus all the friction in the system. The effective weight will decrease as the panels transition to horizontal, but deadlifting 400 lbs is easier than overhead pressing 200 lbs.
Re:How I Replaced Deadly Garage Door Torsion Springs by rightbyte on Tuesday March 19, 2024 @07:41PM (#39761487)
The door is blocked from moving straight downwards at the top (the rollers) and is hinched in the pivot.

You never lift the full weight of the door.

The first inch is only friction, no centre of mass lift, so the leverage is "infinite" when you start opening.

Re:How I Replaced Deadly Garage Door Torsion Springs by notact on Monday March 18, 2024 @08:37PM (#39751758)
Sure it gets progressively easier as more and more of the door rides horizontally on its rails. But those first few inches where the door is nearly entirely vertical, must be some significant fraction of the total weight, probably >90%.
Re:How I Replaced Deadly Garage Door Torsion Springs by LoganDark on Monday March 18, 2024 @08:41PM (#39751786)
Not to mention you have to get your fingers or something underneath the closed door in order to begin lifting it in the first place. So the "from the ground" part is not insignificant.
Re:How I Replaced Deadly Garage Door Torsion Springs by ComputerGuru on Monday March 18, 2024 @11:46PM (#39752762)
All garage doors I’ve seen had a heavy yank handle on the inside.
Re:How I Replaced Deadly Garage Door Torsion Springs by LoganDark on Tuesday March 19, 2024 @09:10AM (#39755362)
That handle's for when the springs are working. It's probably not going to lift hundreds of pounds without breaking.