Re:How I Replaced Deadly Garage Door Torsion Springs
by codethatwerks on Monday March 18, 2024 @08:24PM
(#39751677)
450lbs but because it is not straight up but up and back that probably gives a 2-1 leverage so 225lb or 100kg. using your legs to lift it would be in the realm of a regular male weight trainer but not the average jo or jane.
[ Parent
| on HN ]
Re:How I Replaced Deadly Garage Door Torsion Springs
by manfre on Monday March 18, 2024 @08:42PM
(#39751797)
Your 2-1 leverage assumption is wrong. The first 1' is full door weight plus all the friction in the system. The effective weight will decrease as the panels transition to horizontal, but deadlifting 400 lbs is easier than overhead pressing 200 lbs.
Re:How I Replaced Deadly Garage Door Torsion Springs
by rightbyte on Tuesday March 19, 2024 @07:41PM
(#39761487)
The door is blocked from moving straight downwards at the top (the rollers) and is hinched in the pivot.
You never lift the full weight of the door.
The first inch is only friction, no centre of mass lift, so the leverage is "infinite" when you start opening.
Re:How I Replaced Deadly Garage Door Torsion Springs
by notact on Monday March 18, 2024 @08:37PM
(#39751758)
Sure it gets progressively easier as more and more of the door rides horizontally on its rails. But those first few inches where the door is nearly entirely vertical, must be some significant fraction of the total weight, probably >90%.
Re:How I Replaced Deadly Garage Door Torsion Springs
by LoganDark on Monday March 18, 2024 @08:41PM
(#39751786)
Not to mention you have to get your fingers or something underneath the closed door in order to begin lifting it in the first place. So the "from the ground" part is not insignificant.
Re:How I Replaced Deadly Garage Door Torsion Springs
by ComputerGuru on Monday March 18, 2024 @11:46PM
(#39752762)
All garage doors I’ve seen had a heavy yank handle on the inside.