Re:Home Lab Beginners guide
by buybackoff on Friday March 08, 2024 @07:15PM
(#39648092)
Thermals are perfect with these Dell SFF things. I tested it couple of times. Not 24/7 at 100%, but e.g. for 5 mins at 100% before vacuuming the outsides and after. NUCs are much more sensitive to dust. I have to *push* air through my NUC like every half a year (not just vacuum pull). But Dells are fine.
Just do not put CPUs with >65W there. Or hungry PCI things.
Re:Home Lab Beginners guide
by CTDOCodebases on Friday March 08, 2024 @05:07PM
(#39647106)
BMC is not a requirement these days as there are options like using a piKVM or AMT/vPRO on certificied Intel systems.
Personally I turn IPMI off. The difference at idle can be up to 20w. Not to mention the outdated interfaces are a sercurity risk
Additionally, one challenge I have with all of these is that none of them have anything like a BMC. If you have more than one system, moving peripherals around sucks, and KVM technology is kind of iffy these days. It seemed easier to just jam an old Supermicro motherboard that had IPMI enabled in a reasonable ATX case with a lower power Xeon variant, and call it a day.