News for hackers. Stuff that matters.
Re:USB-C power for your Amiga 500, 600 and 1200 by gardaani on Friday February 02, 2024 @02:24AM (#39226058)
An interesting detail is that it has a physical switch to turn it off.

> Utilizing any 12V-capable USB-C power supply

Are different kind of USB-C power supplies, some not outputting 12V? Does it mean that normal phone chargers aren't good?

Re:USB-C power for your Amiga 500, 600 and 1200 by gbraad on Friday February 02, 2024 @02:51AM (#39226203)
Some chargers don't do 12V or 15V, but will do 5V, 9V and 20V. This depends a lot on the total wattage. Lower watts, like 20W or 30W can or can not do 15/20V, but [email protected] (18W) and [email protected] (30W). Usually the >65W will do most of them, plus PPS. Always check specs. And what is the input voltage this powerplug expects; 15V or 20V?

> Utilizing any 12V-capable

If so, this is usually at a VERY low wattage. they usually go to a max of 2.5 or 3A max at 12V. I would expect it would use 20V and step-down as 20V is more generally available at a high Amperage. (Note: 3A is the max possible for cables without an E-marker, os if often regarded as a ceiling). This would have made the device much bigger (and more versatile. a clear trade-off).

Actually, I am more concerned about -12V, ... at 0.1A. That seems rather low. Also, the 12V rail itself is only 1.0A. The original supply did 12V@2A and [email protected] if not mistaken, and so does the C64psu.com. Overall, rather low Amp values. This might affect 'stability' if your machine is expanded (although it claims: "of even the most expanded configurations"). Curious if they can share some details. I have a BlizzardPPC in my A1200.

> allows users to tap into a vast array of affordable and readily available “power bricks”

if DC5521 at >12V to 20V is possible, that would be great, as this allows you to use a Lenovo or generic laptop brick, or a USB-C trigger cable. Perhaps something I should make ...

Re:USB-C power for your Amiga 500, 600 and 1200 by p1mrx on Friday February 02, 2024 @03:54AM (#39226607)
One would hope that they based their power limits on real-world measurements.

Maybe the original power supply was oversized to avoid efficiency loss near 100% load, or because precise overcurrent protection wasn't available?

Re:USB-C power for your Amiga 500, 600 and 1200 by gbraad on Friday February 02, 2024 @09:49AM (#39229156)
I'd rather have headroom than running in an overcurrent situation. I hope than can provide more details about the capability and what they tested. I moved away from the stock supply many moons ago as it wasnt as stable anymore, plus of powering the accelerator board, plus the CD-drive and harddisk
Re:USB-C power for your Amiga 500, 600 and 1200 by bluescrn on Friday February 02, 2024 @04:54AM (#39226959)
The A1200 at least will actually function without -12V, but the audio will be bad.

I had crackly audio problems. I swapped the A1200 motherboard (a few years back when they were still fairly cheap on eBay), and still had the same audio problem. Only then did I investigate+repair the PSU issue.

Recently built a replacement Amiga PSU from a MeanWell PT-65B board in a 3D printed case. This USB-C option would have been neater and easier (so long as it puts out enough power for a PiStorm as well as the Amiga)

Re:USB-C power for your Amiga 500, 600 and 1200 by gbraad on Friday February 02, 2024 @09:51AM (#39229182)
Pistorm would be 5V. But yeah, perhaps an idea to move away to this instead... Most likely less power hungry. Haven't had the time yet... The place I am in is hard to get shipped in reliably.
Re:USB-C power for your Amiga 500, 600 and 1200 by snvzz on Friday February 02, 2024 @11:09PM (#39237475)
>Only then did I investigate+repair the PSU issue.

This is why you always check the voltages first.

Re:USB-C power for your Amiga 500, 600 and 1200 by bogantech on Friday February 02, 2024 @06:09AM (#39227376)
In these machines +/-12V is only used for Audio op-amps, RS232 Line drivers and the floppy motor. everything else is running on the 5V rail.
Re:USB-C power for your Amiga 500, 600 and 1200 by gbraad on Friday February 02, 2024 @09:45AM (#39229097)
That is not completely true. The opamps for sure, but the 12V rail is also used for external devices, eg harddisk, cd drive, expansion cards, etc.

Too low current on the -12V rail can cause crackling sound. I use my A1200 machines mostly for this, although more using AHI than before.

Re:USB-C power for your Amiga 500, 600 and 1200 by bogantech on Friday February 02, 2024 @01:49PM (#39232577)
> the 12V rail is also used for external devices, eg harddisk, cd drive, expansion cards, etc

External drives should have their own power supply and indeed the A590, A570, GVP drives etc all do.

The A500/A2000 Technical Reference (page 227) shows that the 12V current limit on the expansion connector is 50mA

The A600/1200 don't even have the expansion connector

Page 5 of the TRM specs the -12V supply at 100mA

> Too low current on the -12V rail can cause crackling sound.

Maybe if the current is zero

TRM: https://archive.org/details/CommodoreAmigaA500A2000Technical...

Re:USB-C power for your Amiga 500, 600 and 1200 by gbraad on Saturday February 03, 2024 @03:54AM (#39238644)
I thought the trapdoor (cpu slot) also exposed 12V, but just checked and I was wrong. Thanks for clarifying that the 12V rail might be sufficient.
Re:USB-C power for your Amiga 500, 600 and 1200 by laubzega on Monday February 05, 2024 @04:48AM (#39259241)
Principal designer of PowerShark here. Original PS spec from Commodore defined 5V/3A, 12V/0.5A and -12V/0.1A as max. load (http://www.kaiiv.de/servicemanuals/A500_Power_Supply_Specifi... page 3) It was in later models bumped up to 5V/4.5A and 12V/1A, with -12V unchanged.

In actual use, a "wedge" Amiga consumes just below 30mA from -12V line.

Visit our page, there is now a detailed FAQ and a list of various USB-C power supplies we tested with PowerShark.

Re:USB-C power for your Amiga 500, 600 and 1200 by unwind on Friday February 02, 2024 @03:38AM (#39226498)
It might also be a way to indicate that you can't just use a USB A-to-C "charging" cable, and connect it to an old-school 5 V-only USB adapter. It needs the modern power-delivery things which are only available over USB C.

There was (that I could find, and I did go back to check again) no mention of price other than "TBD", which probably means it's not aiming to be a cheap solution. Trying to guesstimate but it's hard, I'm not enough "into" the Amiga retro scene. $99 feels like too much ... $79?

Finally, I found the copy on the site a couple of generous notches above 10 and really think it would help to tone it down just a little. But maybe that's just me being grouchy, as someone who grew up on Amigas it's really great to see this kind of development and continued interest in the machines! Good luck!

Re:USB-C power for your Amiga 500, 600 and 1200 by dark-star on Friday February 02, 2024 @06:51AM (#39227607)
From what I heard from people who are involved in the development and/or in betatesting, the target price is indeed around 80€, so your estimate is pretty spot on
Re:USB-C power for your Amiga 500, 600 and 1200 by fragmede on Friday February 02, 2024 @02:27AM (#39226076)
Yes. Your random usb-c phone charger may not do 12 or 20 volts. It only needs to do 5 volts to charge a phone. A usb-c laptop charger will do more volts and amps which means more watts.
Re:USB-C power for your Amiga 500, 600 and 1200 by rob74 on Friday February 02, 2024 @03:13AM (#39226349)
I imagine the physical switch and the grilles are a tribute to the original power supplies (A500: https://i.ebayimg.com/images/g/wbYAAOSwW1JlX0FB/s-l1600.jpg). The site doesn't give any hint about the color, but I would bet it will be beige...

That being said, the claim that it works with "any 12V-capable USB-C power supply" sounds very ambitious. Is any 12-V capable USB-C power supply capable of delivering 60+ watts?

Re:USB-C power for your Amiga 500, 600 and 1200 by unwind on Friday February 02, 2024 @03:44AM (#39226541)
The sustained power levels are listed as:

      5V: 4.5A
     12V: 1.0A
    -12V: 0.1A
I get 44.5+121+12*0.1=35.7 W from that, but then there has to be some losses too in that 5 V-regulation, but 60 W is probably a bit extreme. No idea how much power an Amiga consumes, though ... found [1] which states 35.7 W (hm) or 25.7 W so it seems to be aiming for the higher of the two which of course makes sense. The A600 and A1200 need even less, max 22.2 W for both models.

[1]: http://www.ianstedman.co.uk/amiga-power-supply-guide/

Re:USB-C power for your Amiga 500, 600 and 1200 by rob74 on Friday February 02, 2024 @03:50AM (#39226577)
I did more or less the same calculation when I arrived at 60 W, but with the peak power levels - if a PSU isn't able to deliver the peak current, which is probably needed when the computer boots up (with the HD spinning up etc.), I'm afraid it won't get to the "sustained" phase...
Re:USB-C power for your Amiga 500, 600 and 1200 by danby on Friday February 02, 2024 @04:42AM (#39226886)
Most amigas users are using some kind of solid state storage these days which will ameliorate this a little. But many/most are using assorted expansion and accelerator cards which can substantially increase the power draw.

It's a bit if a moveable feast how much power an amiga is drawing these days. Certainly, back in the 90s, the original a1200 power supplies often needed to be replaced with something that could deliver more, and the a500 supplies were favoured

Re:USB-C power for your Amiga 500, 600 and 1200 by bluescrn on Friday February 02, 2024 @05:00AM (#39226989)
Many Amigas also have a Raspberry Pi inside them these days, for the PiStorm accelerator, which increases the +5V current requirements a fair bit.
Re:USB-C power for your Amiga 500, 600 and 1200 by danby on Friday February 02, 2024 @05:48AM (#39227250)
Is the pi usually on it's own power supply?
Re:USB-C power for your Amiga 500, 600 and 1200 by bluescrn on Friday February 02, 2024 @11:11AM (#39230288)
Not with the PiStorm32 Lite that I've got.

Seemed to run OK with a Pi 4 on an original Commodore PSU, or at least nothing appears to have blown up or melted when running it for short periods.

Maybe I'm pushing my luck, but then again, back in the day, you'd often be running an accelerator board, hard drive, and a couple of floppy drives from that same PSU, so maybe it's up to the job.

Re:USB-C power for your Amiga 500, 600 and 1200 by gbraad on Friday February 02, 2024 @03:44AM (#39226536)
No, mostly limited to [email protected] (30W) or max @3A as that is the max amperage for a cable without an e-marker.

Confused by:

> allows users to tap into a vast array of affordable and readily available “power bricks”

followed by

> Furthermore, portable USB-C “chargers” are also supported,

So I expect it means it has a USB-C plug and you can feed 12V directly like with the Miniware / Pinecil soldering irons. Though, is this protected for overvoltage?

> If an over- or under-voltage

So, most likely you can only feed 12V. A Dell-brick , like the DA-2 would work: 12V@18A = 216W... but the plug itself has a max 12V@1A :-/. So a cheap 12V@5A brick might be enough for the total wattage (including the 5V rail).

Re:USB-C power for your Amiga 500, 600 and 1200 by Findecanor on Friday February 02, 2024 @03:11AM (#39226342)
> An interesting detail is that it has a physical switch to turn it off.

It is the switch for turning the computer on. The original power supplies all had it on the box.

I had my power supply on the floor under the desk and was used to flipping it on and off with my foot. I used the heavy supply from my A500 with a A1200 later.

Re:USB-C power for your Amiga 500, 600 and 1200 by LeoPanthera on Friday February 02, 2024 @02:51AM (#39226200)
In fact, most don't do 12v. The common voltages are 5, 9, 15, and 20 volts.