News for hackers. Stuff that matters.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by ChrisMarshallNY on Sunday January 14, 2024 @03:33PM (#38994173)
> Retain sufficient in-house production manufacturing that it is possible for future engineers to acquire the skills needed to develop new products, without which all businesses will fail. Even the work that is out-sourced requires internal expertise to write the specifications.

That's the biggie. I think the entire US tech industry has done a gigantic face-plant, when it comes to this.

We have not only outsourced the work, but we have interrupted the transfer of knowledge and expertise.

I have friends that run manufacturing businesses, and they explained how they believe that the US will never regain what it has given away, in the last couple of decades.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by josho on Sunday January 14, 2024 @03:49PM (#38994317)
I've seen a variation of this problem firsthand.

Working at a cable company where they contracted out to vendors most of their software development. They had a few internal systems that they developed in-house and would only hire 'senior' developers. I was curious how they expected to have a steady supply of 'senior' skills without ever hiring, training, and promoting a junior.

I also saw they had no idea how to manage their vendors, partly because they didn't have in-house skills to serve as a sanity check on what vendors were charging. As a result, their vendors profited hugely from the company's ignorance (I know because I also switched to work for one of the vendors).

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by stalfosknight on Sunday January 14, 2024 @05:09PM (#38994926)
This has been my pet peeve for a long time now. Just about every job listing insists on seniors only and they companies complain there aren't enough developers.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by ChrisMarshallNY on Sunday January 14, 2024 @05:43PM (#38995194)
> seniors only

But under 35 (they don't usually say that part, out loud, though).

That's my pet peeve.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by ploxiln on Sunday January 14, 2024 @09:19PM (#38996722)
In software in particular, thresholds have fallen. Maybe "Senior" today is like a junior 15 years ago. (Some interns out of college are really sharp, and some can basically work at the "senior" level immediately. Basically, they think logically, and they know how to write software, which they've been practicing through high school and some college.)

Put another way ... most companies just really suck at hiring software engineers, and the ones they hired before weren't good enough, so it seems they need to hire at a higher level ...

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by kypro on Sunday January 14, 2024 @05:24PM (#38995045)
I've seen exactly the same thing at a couple of companies I've worked at in the past too. One specifically outsourced all of their development because it was deemed to be cheaper (which it was), but after a few years without any in-house technical expertise to oversee development they'd run into all kinds of issues with bugs, outages, slow load times, etc.

For a period when these issues occurred the business could say that they wanted the issues patched, but they never understood why there were so many issues to begin with. It was only until they brought a few people in house to try to bridge conversations between the business and the team of outsourced developers that it was finally raised that the code was completely unmaintainable. And following this an in house team was recruited to bring development back in-house. Of course, when we sorted 90% of the problems the business started questioning why we were needed again and we were all outsourced for a second time...

But this same thing obviously happens in a lot high-tech industries. Without people who are technically competent overseeing what's happening you can only dictate requirements at a high level. You cannot dictate all of the NFRs because you simply do not have the knowledge or ability to oversee them. So what you have is something that at a surface level does what you wanted, but the execution is so horrendous that it's unsatisfactory and no amount of saying "please fix this", "please fix that" will actually resolve the fundamental issue at play.

And the problem is even worse when you want to be an innovator because innovation is impossible when you don't know what is and isn't possible. To push boundaries you first need to know where the hard limitations are and what's just a engineering problem.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by vegetablepotpie on Sunday January 14, 2024 @09:02PM (#38996597)
> You cannot dictate all of the NFRs because you simply do not have the knowledge or ability to oversee them

This is a key point, and I believe the reason why software projects are always late and why it’s impossible to estimate them generally, in a non-domain specific way.

You cannot aggregate all the estimates and recorded performance of past work and use regression towards the mean to have any predictive capacity of how long a new project will take or cost, even when it has similar high level requirements.

This is why 10xers exist, or the perception of them exists. There are people who have seen similar pitfalls in the implementation stage enough times to know how to avoid them and they don’t need to redo things as much.

This is why rewrites are dangerous, even when existing code bases are cumbersome to deal with and expensive to develop. The deep magic of low level NFRs will ruin attempts to replace them.

Some are clever and try to use linters and static analysis tools to avoid this, but these will always be opinionated, domain specific in some way, and incomplete. They can frustrate development when taken outside their domain.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by kypro on Tuesday January 16, 2024 @05:28PM (#39020046)
I think what you're saying is true, but a slightly broader issue around why software development is difficult more generally.

What I'm touching on here is more related to how outsourced teams typically lack the ownership and motivations that internal technical teams will generally have.

The specifics will vary depending on the outsourcing model, but outsourcing to a remote software development agency is typically the worse of all possible options. The reason for this is that code quality and maintainability is rarely ever a priority for an agency because they're typically judged purely on whether they can deliver what they promised to the client on time. It's very hard to tell a client that a feature is coming 3 months late and will cost extra, but that time is needed to ensure the developers are happy with the code quality.

Additionally, if there are any bugs that's often a good thing for a software development agency because not only will you now be paid for the initial feature development, but you'll also be paid for any subsequent bug fixes.

If outsourcing is done directly then the results are typically better because the remote team tends to have more agency. The business might still ask for a feature as soon as possible, but now the remote team isn't going to receive extra work for bug fixing the crappy code they deliver. They also don't have multiple clients and are going to be working solely on that single codebase so can't just hand off any issues to the next guy who comes along. With direct outsourcing the incentive to deliver crappy code no longer exists so typically the quality increases. Additionally the business might trust the remote employees enough to judge their own performance for which they can include NFRs instead of judging performance purely on the speed at which features are delivered.

However, even if directly outsourcing employees are rarely seen as equal to other employees at the company. The business basically just sees them as cheap code monkeys and the code monkeys know that's all they'll ever be too. Employees working at head office on the other hand might be motivated to go above and beyond because they want to be recognised by their bosses, and if they do a good enough job they might even get a promotion. This just never going to happen to a code monkey in India who can barely speak English no matter how competent they are.

Additionally, a team at head office is also likely to have more influence on business decisions and be able to feed technical input into the decision making where useful. This increased influence also means employees are more likely to care about the company since they feel closer and more involved in decision making.

The reason outsourced teams are bad isn't necessarily because they're not hiring enough 10x developers (although they're often not incentivised to do that either), it's more that there's usually little real reason for anyone to produce anything of quality. No one is going to be promoted, no one has any influence, developers are mostly just being judged on how fast they can deliver features because that's the only metric non-technical individuals can assess their productivity by, and finally they're disconnected in just about every possible way (location, culturally, hierarchically, etc).

I think what might work is have a great development team in house who can make all right high level technical calls, then outsource the grunt work while assessing them both on speed and on quality. A almost every company I've worked for there are talented people wasting time on nonsense like bumping project project dependencies and replacing deprecated code. I'd guess that work could be outsourced with near-zero downside and a significant cost saving.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by ryandrake on Sunday January 14, 2024 @06:10PM (#38995419)
I feel like the executive business class of this country has this dystopian vision: that the future of American business is just a handful of CxO and SVP people running around making $xxM dollars a year with all the actual labor doing the actual products and services being done by as-cheap-as-possible, expendable offshore workers. This is the end game they are shooting for: They want us in an Elysium hellscape with a few of them enjoying everything and the remaining 8 billion people in squalor.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by TheOtherHobbes on Sunday January 14, 2024 @06:49PM (#38995702)
That's exactly the problem. It's purely a status play, in the narrowest and meanest sense.

It's unthinkable and insulting that some of the lower orders might have actually have valuable skill or important agency.

The primary product of corporations has always been hierarchical status for the owners.

But sometimes there's been some sense of generosity and mutual obligation. Now there's none - just myopic selfishness which often leads to disastrous consequences, sometimes affecting those afflicted by it.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by mschuster91 on Sunday January 14, 2024 @06:55PM (#38995739)
Most of them are going all-in for automation of everything these days, either classic robots or some fancy iteration of "AI". Chinese labor got too expensive, even Apple is fleeing, most of Asia is too unstable politically given the potential for multiple hot wars in the entire region (most involving China, but there's also India and Pakistan), Southern America is too unstable as well with either lunatic politicians or drug lords running the show, most of Africa just doesn't have the infrastructure required for either low-skill industry work or IT offshoring plus the looming effects of climate change and, again, multiple hot wars going on. Oh, and machines don't go on strikes or demand market wages.

So, the result will be even worse, with people not even having jobs and left to fight for scraps instead. Or maybe one of the hot wars will eventually go global and humanity will be nuked down to 1% of the population, Fallout style. Who knows.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by lacrimacida on Sunday January 14, 2024 @07:59PM (#38996148)
Nukes arent even nrcessary for a drastic fall in population. A worldwide famine would be just enough do that
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by Qwertious on Monday January 15, 2024 @02:17AM (#38998221)
A worldwide famine would cause nukes - people don't quietly sit around and starve, they revolt. Meanwhile, if you're a head of state that needs more food (because you don't want to be lynched) then you go acquire more farmland.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by DrScientist on Monday January 15, 2024 @09:39AM (#39001449)
You can't acquire more farmland by nuking the current owners - as it tends to be unusable as a result.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by somenameforme on Sunday January 14, 2024 @11:16PM (#38997398)
I agree with the perception, but I don't think that's the reality at all. In general I think they simply are not thinking about much of anything except how to increase next quarter's margins or hit their contractual benchmarks to unlock their options. They have no big picture thinking, whatsoever. It's all just 'make number go up' mentality.

You can also see this in their personal behavior. Those at the top of the top have enough money to do anything. And what they end up doing tends to be work until they drop dead, in some cases literally - with 93 year old Buffet being the poster boy there, engage in mundane hobbies and activities - same as anybody else, and then start directing lots of money towards philanthropy. But the myopia tends to again strike there often making the philanthropy awkward and largely ineffective in effecting any sort of meaningful and lasting change -- unforeseen and unintended consequences, alongside a simple mixture of inability, abounds. The philanthropy ran exactly as they ran their businesses.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by epc on Monday January 15, 2024 @12:02AM (#38997614)
It's not the C–suite that’s the problem, they’re just doing the bidding of the “shareholder activists” and stock market geniuses who are so brutally focused on extracting every last cent of value from enterprises that sacrificing anything longer term than the next quarter is perfectly acceptable.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by WalterBright on Monday January 15, 2024 @01:03AM (#38997834)
The theory that enterprises are all sacrificing the long term for the next quarter's success doesn't explain why companies do better year after year.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by DougEiffel on Monday January 15, 2024 @03:43AM (#38998638)
Companies usually do better year after year until they reach market saturation or until the competition kills them.

Once one of those things happens, they start to squeeze blood from the stone. The quality of the product drops, the prices are inflated, jobs are outsourced or eliminated, they pivot into providing other goods and services (which will also get worse later), etc.

None of these things are mutually exclusive with that "next quarter" mindset.

I actually blame the stock market for a lot of this. Private companies can, in theory, settle for just making a nice profit year after year. As long as they come out profitable they don't need to expand. Once you're publicly traded though, you have no choice but constant expansion.

The boom and bust cycle has been happening for a long time now.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by DrScientist on Monday January 15, 2024 @09:36AM (#39001419)
> The boom and bust cycle has been happening for a long time now.

Is part of the problem, that people making the decisions have asymmetric incentives - the gain from the boom is greater than the penalty from the bust?

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by WalterBright on Monday January 15, 2024 @05:30PM (#39006964)
Stockholders are owners. If they suspect the company is sacrificing the long term for the next quarter, they are going to dump the stock as soon as they get a whiff of that.

The value of a stock is base on its long term value, not its short term value. Sabotaging the future of the company to drive short term results is something you'd have to keep secret.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by Qwertious on Monday January 15, 2024 @01:54AM (#38998103)
"Shareholder activists" are just following their own incentives, though, just like the C-suite. At a certain point, you have to either blame the people doing the things or blame it on capitalism in general.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by DrScientist on Monday January 15, 2024 @09:27AM (#39001330)
The CEO can really make a huge difference.

I've worked in a major company ( global - 10s of thousand of employees ) where the chairman and CEO were changed and it was like night and day.

The company changed from one that was driven too much by short term pressure from money men investors, to one that took a much longer term view and invested in R&D and inhouse skills.

Note the change in management was instigated by some of the larger, longer term investors ( pension funds etc ) - ie not all capital is short term.

The new CEO put together that long term vision - said investment now ( and so lower EPS now ) will result in substantial longer term bottom line growth - had to persuade the markets etc.

They were successful, and it's sort of self-fulling - the short term capital leaves and you get more longer term investors that matches that longer term vision ( obviously the spiral can go the other way ).

However - that's the easy bit - delivering growth - at some point it's not possible to sustain that level of growth - then selling the idea you need to invest to standstill is much harder.

The CEO - also have to fight-off opportunists - where the problem is the maths is often in favour of buying a company, stripping/milking the assets and sacking the people.

Note sometimes it's only capital efficient because the capital doesn't need to pay the full social costs of the company destruction - it's governments job to make sure they do.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by red-iron-pine on Monday January 15, 2024 @10:17AM (#39001883)
Bro this isn't a vision, it's been happening, as fast as the global economy could allow, since the 1990s.

there have been some clawbacks -- government regs, realizations that low-cost means you get what you pay for -- but it was going hard before, and will keep going.

a significant portion of HN is either automating, offshoring, or else working next to these trends (if they're not making them happen).

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by bossyTeacher on Sunday January 14, 2024 @07:12PM (#38995853)
> I know because I also switched to work for one of the vendors)

Is that legal in the United States? In many European countries, you can't just leave your employer and go work for a client/partner due to the potential of you using the business secrets to disadvantage your former employer

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by p_l on Sunday January 14, 2024 @08:09PM (#38996213)
Even in Europe it can be legal, depending on exact contracts. Especially moving along outsourced "trusted" companies, sometimes it's seen as essentially divestiture of business unit into another company, etc.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by db48x on Sunday January 14, 2024 @11:16PM (#38997396)
Absolutely. You can leave your employer any time you want, and there is nothing they can do about it. You don’t even have to give notice, although it is polite to do so. And you can go work for their competitors too, unless you signed a contract ahead of time in which you promised that you wouldn’t. Even then, that may not be enforceable.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by pm24601 on Monday January 15, 2024 @01:04AM (#38997840)
This statement is true in some US states (California for example) However, it is not universally true.

From the FTC rule finding (1/2023): https://www.ftc.gov/legal-library/browse/federal-register-no...

> "About one in five American workers—approximately 30 million people—are bound by a non-compete clause and are thus restricted from pursuing better employment opportunities. A non-compete clause is a contractual term between an employer and a worker that blocks the worker from working for a competing employer, or starting a competing business, typically within a certain geographic area and period of time after the worker’s employment ends. Because non-compete clauses prevent workers from leaving jobs and decrease competition for workers, they lower wages for both workers who are subject to them as well as workers who are not. Non-compete clauses also prevent new businesses from forming, stifling entrepreneurship, and prevent novel innovation which would otherwise occur when workers are able to broadly share their ideas. The Federal Trade Commission proposes preventing employers from entering into non-compete clauses with workers and requiring employers to rescind existing non-compete clauses. The Commission estimates that the proposed rule would increase American workers’ earnings between $250 billion and $296 billion per year. The Commission is asking for the public’s opinion on its proposal to declare that non-compete clauses are an unfair method of competition, and on the possible alternatives to this rule that the Commission has proposed. "

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by toast0 on Sunday January 14, 2024 @08:51PM (#38996513)
> I was curious how they expected to have a steady supply of 'senior' skills without ever hiring, training, and promoting a junior.

You can do it, but since you're relying on others to build the pipeline, you're going to have to pay a lot more salary to the seniors than you would if you promoted them.

Maybe that makes up for the salaries of juniors and the portion of time spent by seniors on mentoring juniors. But then some seniors want to do mentoring, and you're not providing that opportunity, so more reason for them to demand more pay.

IMHO, it's workable, if not necessarily desirable, if you want a small team. If you want a big team staffed with only seniors, I think it's going to be a challenge.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by ta1243 on Monday January 15, 2024 @06:09AM (#38999513)
> You can do it, but since you're relying on others to build the pipeline, you're going to have to pay a lot more salary to the seniors than you would if you promoted them.

Not really, because people aren't loyal to companies, it's not the 1980s.

If Company A trains a junior to a senior and fails to pay senior rates, what stops that new senior moving to Company B?

Company A and Company B thus have to pay roughly the same, who did the Junior->Senior transition doesn't matter

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by toast0 on Monday January 15, 2024 @11:15AM (#39002480)
Inertia helps. It's common knowledge that you'll get paid more if you switch jobs. Which means Company A gets a discount until the person leaves (but maybe they'll take a matching offer)
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by ta1243 on Tuesday January 16, 2024 @04:02AM (#39011097)
That's the normal stickiness of a job, but if you are a junior and you've levelled up to senior you'll likely be looking at a wide number of roles far more than a senior staying still.

Some things are easy wins for retention -- my company gives extra holiday as tenure extends for example, and people of a certain age still have a defined benefits retirement plan which has significant value. The extra holiday costs companies nothing, but an extra day each year really helps, start with say 28 days, but after 5 years you're on 33 days. It's harder to put a monetary value an extra day off, so harder to make the jump-ship calculation.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by JeffSnazz on Sunday January 14, 2024 @04:28PM (#38994606)
> they explained how they believe that the US will never regain what it has given away, in the last couple of decades.

Sure we can. It requires pivoting into stealing or otherwise replicating China's insane level of industrialization, but it's a little funny seeing people become despondent at the idea of merely losing clear economic hegemony over the world and becoming #2. We didn't lose anything in the last 5 decades we can't gain back faster.

Here's hoping China's reign comes with fewer invasions.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by ChrisMarshallNY on Sunday January 14, 2024 @05:47PM (#38995226)
I believe in something called "Social Infrastructure"[0]. That's basically what folks might label "tribal knowledge," but it goes far deeper.

This is something that takes generations to build, but can get lost, very quickly.

Folks, these days, aren't actually any smarter than our ancestors. We just have a vast social infrastructure that raises the baseline for our starting point.

[0] https://littlegreenviper.com/miscellany/infrastructure/

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by JeffSnazz on Sunday January 14, 2024 @09:23PM (#38996753)
> This is something that takes generations to build, but can get lost, very quickly.

Sure, hence my assessment of 5 decades.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by bluGill on Sunday January 14, 2024 @04:45PM (#38994733)
The US has not lost industry. We have lost unskilled and semi-skilled grunt labors, but there is a lot of manufacturing happening here and a lot of expertise. If you want to cut a piece of metal by hand to high accuracy - sorry we have moved all that to CNC (often laser) cutters and nobody remembers how to do it anymore. However if you want to take those cut parts and assemble them into something - there is plenty of expertise to be had.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by JeffSnazz on Sunday January 14, 2024 @05:32PM (#38995112)
> The US has not lost industry.

Compared to China's absolutely staggering industrialization it has!

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by pas on Sunday January 14, 2024 @06:22PM (#38995492)
yes, as it should have.

first of all, there's no point in having all kinds of low-added-value industry in high-income places as long as there are millions of people willing and able to do it all in the same place close to a port.

second, US industry suffers from two major problems. protective tariffs keeping productivity low, and the 'exorbitant privilege' of the USD being reserve currency of the world, which counterintuitively hurts export of every non-finance sector

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by TheOtherHobbes on Sunday January 14, 2024 @06:55PM (#38995743)
First of all, yes there is, because it creates a culture of hands-on expertise, and appreciation for how the real world works outside of a spreadsheet.

Second, productivity in the US is fine. The problem is the profits are very unevenly distributed.

You can't run a consumer economy by underpaying your consumers, forcing them into debt, and bankrupting them with - for example - health care costs.

Third, the kindest thing you can say about outsourced manufacturing is that it's strategically unwise. It's good if you want cheap Chinese chips with unknown abilities in your military and civil infrastructure, but not so good if you stop to wonder if perhaps that isn't all that good an idea.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by pas on Monday January 15, 2024 @07:06AM (#38999893)
the claim was that the US has lost its industry compared to China. which is ridiculous when looking at the numbers, but understandable if someone is misinformed (because they only know about the rust belt, let's say)

what I'm trying to point out is that having a first-class industrial base, with enough experts, well running supply-chains, and so on, is different from eclipsing China in straight to trash gadget output.

that said, of course, as the article and the comment section clearly shows there are a lot of high profile cases where the trope of bean counters ran the business into the ground has been very unfortunately true.

productivity of the whole economy is fine, but aggregates hide a gigantic mountain of first- and second-order effects that hurt millions directly and indirectly. (as you mention wealth, income, health and other kinds of inequalities are mostly reinforced by a lot of powerful systems. and, just to emphasize this, US social mobility is on par with Spain's, despite the latter known for generous welfare programs, but almost all developed countries have serious tensions between rural-urban groups, generational wealth transfer due to real estate prices spiraling out of control, and so on.)

there are other countries besides China, and there are other sectors besides pew-pew and let's say nuclear power plants, or train safety systems.

the obvious (well, of course not to everyone) problem is that there's no serious effort for economic integration with US allies. the US still has a lot of protectionism dressed up as national security. from the Jones Act shenanigans (oh think of the shipbuilders, oh only one left basically in a zombie state), and the baby formula oopsie (oh think of the horror of Canadian baby formula or European, but no Abbott knows best), and there's some pork for the textile industry too, and so on.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by JeffSnazz on Monday January 15, 2024 @09:27AM (#39001327)
> which is ridiculous when looking at the numbers

show me the numbers

> what I'm trying to point out is that having a first-class industrial base, with enough experts, well running supply-chains, and so on, is different from eclipsing China in straight to trash gadget output.

Absolutely true! But we're nowhere near able to do the latter, so what's the point in caring?

> social mobility

Unrelated, but this is a misnomer. The correct term would be "economic mobility". Social concerns are necessarily orthogonal (i.e. intersectional) to economic ones. I understand that social mobility is the common term but it's extremely disingenuous when it only intersects with social interests through economic interests.

Economic mobility is also strictly less interesting than wealth disparity—being able to move up the social ladder doesn't matter much if there's still self-aggrandizing ghouls controlling most of the economy and the market fails to represent the public.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by pas on Monday January 15, 2024 @08:17PM (#39008227)
https://fred.stlouisfed.org/series/INDPRO industrial output is almost at the 2018 level

> market fails to represent the public

what are you talking about? the public buys shit from China and uses Amazon, and votes for idiots who then dismantle the rest of the system around them. sure, we can console ourselves that it's not the majority, but hundreds of millions of them are part of the problem.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by Nevermark on Sunday January 14, 2024 @06:32PM (#38995575)
Millions of people doing low level things learn higher level things from their experience.

If you can’t completely automate something, there are by definition, still useful things to learn.

Outsourcing the advancement of low level work to automated work puts a business’s competitive edge in jeopardy.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by doublespanner on Sunday January 14, 2024 @07:51PM (#38996091)
Not inherently true, there is not really a path from manual sheet metal work to CNC for example.
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by Nevermark on Sunday January 14, 2024 @08:50PM (#38996503)
Sounds like a useful problem to solve - with a different approach perhaps.

I think it is fair to expect that everything will get automated in an economically advantageous way.

And if the solution is novel & challenging, it is likely to provide valuable unexpected side benefits & capabilities.

The automation question is just: when, how, and by who.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by pas on Monday January 15, 2024 @07:21AM (#39000017)
... if you automate it there's even more things to learn, of course.

this is not a black-and-white thing, outsourcing makes sense in many cases and doesn't in others. the automotive industry does it for quasi-standardized components. (and there's a competitive market, for airplane parts, not so much it seems.)

and on top of all this for things that have inherent safety critical aspects there is no real difference between outsourcing or doing it in-house, there's a need for controls (organizational, quality, independent testing lab with random sampling).

the fucked up process of gutting companies for short-term profits happened just as well for non-outsourced departments too.

as industries mature, companies grow and became organizationally more complex training and advancement itself becomes a challenge. (and many companies just put their heads in the proverbial sand, and hire clueless recruiters - or outsource it - and end up with paper tigers, who have absolutely no idea WTF is going on in the company, but quarterly reports look amazing.)

...

finally, if market forces push for short-term thinking (and simple, wrong, but fancy 'solutions') that's what we'll end up. and if society and politics also has the same mindset it's not surprising that industry will mirror it. (and to overuse the overused cliché gestures wildly )

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by JeffSnazz on Monday January 15, 2024 @07:51AM (#39000302)
> there's no point in having all kinds of low-added-value industry in high-income places

The point is economic and social stability. If you don't value that over profits, of course, I can understand why you would be resistant to this line of thought.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by wkat4242 on Sunday January 14, 2024 @04:57PM (#38994820)
> If you want to cut a piece of metal by hand to high accuracy - sorry we have moved all that to CNC (often laser) cutters and nobody remembers how to do it anymore.

That's just the tooling keeping up with the times. The Chinese don't do this by hand either.

They're just way better at doing it at volume.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by bluGill on Sunday January 14, 2024 @08:23PM (#38996321)
One cnc today machine does the work of 100 1950s men. (1950 so no women) that is the point, those factories still exist in the us, but with far less people in manufacturing
Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by hinkley on Sunday January 14, 2024 @05:17PM (#38994983)
I came to say much the same thing, but specifically about IT.

I used to run architectural ideas by operations people who would - and occasionally did - tell me I was full of shit. Maybe 1 in 10 of us are brave enough to to this, 1 in 6 if we are generous, but now there is nobody to tell us we are being stupid before we steer the ship toward an iceberg.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by steveBK123 on Sunday January 14, 2024 @06:14PM (#38995442)
Yes, it feels like a certain project that was foisted upon me. Fixed price SOW with a vendor to build a thing my firm didn't have domain knowledge in.

Paid them to design a thing, then paid them to implement the design, as well as project manage themselves. SOW lacked meaningful acceptance criteria / objective tests.

Of course, it was non-stop debacle of new things being discovered during implementation. Weekly status calls just turned into recrimination sessions with fingers pointed in all directions as to who is responsible for the time/cost.

You can't rent knowledge.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by bboygravity on Sunday January 14, 2024 @05:54PM (#38995279)
Same in Europe.

I've worked at 2 companies now that have been eaten by bigger ones and pretty much instantly moved to lower income countries. Both in manufacturing, one in aerospace.

Re:'This Has Been Going on for Years.' Inside Boeing's Manuf... by cabalamat on Sunday January 14, 2024 @11:21PM (#38997428)
More simply: don't outsource activities that have a complex interface to your organisation.

Having to write complex specs for an outside organisation to implement is an anti-pattern, because:

- the more complex a spec the harder it is to write and understand

- there's potential for endless disagreements / lawsuits on what was actually promised and delivered

- the overhead of having a complex spec that must be understood by people in both orgs.