Does this type of occupancy tracking work accurately outdoors? I'm assuming it would be difficult because signals would travel further. (My startup needs occupancy tracking for tennis courts.)

Maybe I could mount a BT device at a corner of the outdoor space and use its signal strength as the threshold value.

You could mount one at each corner and use a directional antenna to help.

You could use the BLE AoA extension as well to derive an angle: https://www.bluetooth.com/blog/new-aoa-aod-bluetooth-capabil...

If you want to get really spicy, you can use two antennas and an SDR to compute angle of arrival using nothing but a BLE advertisement's data . This is different from BLE AoA as it doesn't require a cooperative transmitter.

If you want to get really, really spicy, use three devices/antennas and you can roughly track in three-dimensional space.

there are wifi setups that allow you to do this already.

I would like to subscribe to this API.

Wouldn’t three dimensional tracking need four antennas?

Three appropriately spaced antennas will give you azimuth and elevation of a ray to the transmitter, but not distance.

But using two of the above in different, known locations would allow you to compute the intersection to a 3D location.

You the same george ashworth that used to work at d&b?

It does but we don't have a battery powered option (yet) so power availability is the bigger issue. Our sensors can only be outlet powered. Each sensor can cover cover roughly 5,000 sq.ft. or about two tennis courts.

Did you consider using BT or UWB as a radar? On a tennis court you won't have any obstacles to worry about, I suspect it's relatively easy to solve.

UWB in particular is accurate enough to get breathing patterns...

Can you do fall detection for the elderly?

Seeed Studio (maker of the Xiao) have mmwave sensors that can do fall detection.

The differing correlation factors seems like a difficult problem for productizing this. I would expect a STEM college building to have maybe >3 BT devices per person, while other venues may have less than 1.

> How accurate is BLE beacon count, as a proxy for occupancy?

But how often is an accurate count needed? The initial requirement of the project was just for the OP to "avoid crowds in the dining hall", and for that all one needs is a general idea of highs and lows.

In your business, do customers expect high accuracy? All of them, or some of them?

Also, regarding MAC address, even if they're randomized, isn't there a way to know what kind of device it is? (to count only phones for example, and discard headphones, etc.)

FWIW, Meraki gives you this as well as part of their cloud management of their network. They might be able to do a lot more if they track wifi, wifi macs, and vision and tie it together.

Just letting you know of one of your potential competitors.