News for hackers. Stuff that matters.
Re:Sennheiser HD 555 to HD 595 Mod by accrual on Sunday June 18, 2023 @10:11AM (#36380450)
Two other older AMD CPUs could be similarly unlocked:

- AMD K6-2+ with 128K of L2 cache can be converted to a K6-3+ with 512K. The CPU has a heatspreader that can be carefully removed revealing a series of zero-ohm resistors, moving it to the right location unlocks the cache. The CPU is still bound by binning as to whether or not it can be overclocked well.

- AMD Athlon XP could be overclocked with the "pencil mod", using a pencil to draw a conductive trace between two pads on top of the CPU, no delidding required.

Re:Sennheiser HD 555 to HD 595 Mod by craigmcnamara on Sunday June 18, 2023 @11:18AM (#36381045)
Isn’t a zero ohm resistor just a jumper?
Re:Sennheiser HD 555 to HD 595 Mod by tialaramex on Sunday June 18, 2023 @11:21AM (#36381077)
In a sense that's correct, but "jumper" suggests these are deliberately components you can change whereas "Zero ohm resistor" is likely intended to be permanent.
Re:Sennheiser HD 555 to HD 595 Mod by cwillu on Sunday June 18, 2023 @12:51PM (#36381927)
In PCB manufacturing, a jumper wire is just a wire soldered between two points. A designer might or might not install jumper pins like those you refer to.

Regarding the use of a 0-ohm resistor instead of a jumper wire: wires are rather annoying to deal with in pick-and-place machines, while a 0-ohm jumper can be reel-loaded like any other part.

Re:Sennheiser HD 555 to HD 595 Mod by joezydeco on Sunday June 18, 2023 @11:23AM (#36381092)
It is, but pick-and-place robots like to work with zero ohm resistors compared to small pieces of wire. Also makes it easier to change later, you just swap reels.