Re:AirJet – The world’s first solid-state chip for active de...
by vincnetas on Sunday January 22, 2023 @02:36AM
(#34475243)
is it theoretically possible to have cooling paste be jelly like? so it just returns to previous position after cooling down? or its just to irrelevat problem to invest in it?
Re:AirJet – The world’s first solid-state chip for active de...
by rocqua on Sunday January 22, 2023 @02:39AM
(#34475252)
It is, and thermal paste manufacturers need to balance performance against thermal cycling effects.
Re:AirJet – The world’s first solid-state chip for active de...
by ksec on Sunday January 22, 2023 @02:56AM
(#34475339)
>is it theoretically possible to have cooling paste be jelly like?
That is already available and used in some Laptops. Look up Honeywell thermal pad.
The problem is as always, cost.
Re:AirJet – The world’s first solid-state chip for active de...
by numpad0 on Sunday January 22, 2023 @05:02AM
(#34475919)
I thought thermal pads are generally thicker and less performant
Re:AirJet – The world’s first solid-state chip for active de...
by IlGrigiore on Sunday January 22, 2023 @05:31AM
(#34476034)
There are thermal pads that perform equally or better than thermal pastes, due to their design. In particular, something like https://thermalmanagement.honeywell.com/us/en/products/therm... can be better than a good thermal paste like https://www.thermal-grizzly.com/en/products/16-kryonaut-en. The thermal conductivity is improved due to the use of a phase shifting material. Reliability is improved due to the fact that it will naturally return to solid without cracking during heat cycling.
Re:AirJet – The world’s first solid-state chip for active de...
by trompetenaccoun on Sunday January 22, 2023 @03:07AM
(#34475380)
Are there designs that don't use thermal paste? As I understand it regardless of solution you need paste or live with significantly reduced conductivity. That goes for any system - fan cooled, liquid cooled, passive,...
Re:AirJet – The world’s first solid-state chip for active de...
by Latty on Sunday January 22, 2023 @03:31AM
(#34475476)
Graphite thermal pads are available for consumers (e.g: Thermal Grizzly Carbonaut,
IC Diamond Graphite) which offer similar performance (within 5°C) to paste without this issue.
Re:AirJet – The world’s first solid-state chip for active de...
by andy_ppp on Sunday January 22, 2023 @06:37AM
(#34476409)
Does Apple use paste or pads in the MacBook air?
Edit: to answer my own question it looks like Apple uses thermal paste but the cooling in the M2 MacBook Air looks extremely flimsey to the point of being almost non-existent. I doubt it will be affected much at all by this.
Re:AirJet – The world’s first solid-state chip for active de...
by ethbr0 on Sunday January 22, 2023 @10:32AM
(#34478297)
You're looking for phase change materials (PCM), which soften at the desired operating temperature. Prevents pumping out because it's still mostly-solid.
E.g. https://thermalmanagement.honeywell.com/us/en/products/therm...
Re:AirJet – The world’s first solid-state chip for active de...
by sandworm101 on Sunday January 22, 2023 @11:19AM
(#34478864)
>> Are there designs that don't use thermal paste?
Yes. Glue. Paste is for when you might want to one day separate part from heatsink. If you don't care about repairs, it is perfectly reasonable to just glue them together with thermal adhesive.
Thermal expansion/contraction between cooler and chip itself "pumps" out the thermal paste which over time degrades cooling performance. If the system is running 24/7 its probably not as noticeable because you don't get the frequent heating/cooling you'd see on a device that gets power cycled often.
Nothing a repaste job wont fix.