That’s why you need a construction supervisor, a third party that’s on your side (if you don’t have the skills, knowledge, or time, to be the supe).
And like for renovations, lots will bid the easy project and do it as fast as they can vs ensuring that anything that comes up is addressed well.
Shadow builder.
In a nutshell, they are manufactured into standard components and assembled onsite. The number of defects is small.
The level of quality is incredibly better than what most builders can produce.
They are not cheap, though. There are several alternative manufacturers. They are a great option for a bungalow.
The company that makes the plans is http://www.firstdaycottage.com/
I'm not familiar with the American market, but I'm willing to bet there are some similar options.
If I recall correctly, Huf Haus is around since forever, before WW1, and they continuously evolved, their solutions are more than well tested, as "perfect" as they can be.
The great advantage of the "fully integrated pre-fab" (such as Huf House and similar) is that IF/WHEN the project is done, the result will be exactly what has been designed, the great disadvantage is that once the project has been approved, NO changes are possible (and again from experience it is a rare case that the customer/owner is capable of fully understand the project in all its details).
Back to the OP question the issue (generally speaking and in my experience) is about coordination of the various figures involved, typically here (EU, Italy) you will have several people:
1) land surveyor
2) architect (here the architect is more about design than building)
3) engineer (structural)
4) engineer (hydraulics)
5) engineer (electric)
6) general contractor or builder
7) various sub-contractors (electrician, plumber, etc.)
The common issue is that each of them (usually) have a somewhat "narrow" view, limited to their particular field, and often (please read as "always") they don't communicate properly among them and with the customer/owner.
The exception (as well usually) is, or should be, the general contractor, but an experienced enough one is unlikely to be available for a single house building or will dedicate to it too little time.
Mind you each of the figures I mentioned are in most cases very good at what they do, but, in the absence of someone who coordinates the project and execution, it is common that the result is not as good as it could be.
There are (were) people (shameless plug I am or was one of them) that while not specialists in anything have the experience and capability to coordinate these people and - also important - "translate" and "interpret" the desires of the customer/owner, the "project manager" and/or "site manager" that could be either paid by the general contractor or by the customer/owner.
Sometimes (not often) the architect (or the builder) has these capabilities, or is part of a largish firm that can provide such a resource for the project.
Since this has a cost, and building is generally a cost competitive field, this added cost is one of those that in recent years has been (generally speaking) either cut or reduced to the minimum (like giving - say - five or six building sites to the same person, which won't have the needed time to follow in detail each of them).
So, in a nutshell (and as always) it all depends on the people, you might be able to find a builder (usually small firms, almost familiar ones) that can do this or you might be able to find an architect studio (as well a smallish, but not too small one) that can provide you with this service, or maybe you can find and hire yourself such a manager/coordinator.
Regarding Huf Haus alternatives, there are a few German brands that are quite similar. Baufritz for instance is also old, and manufactures outstanding houses: https://www.baufritz.com/uk. The problem is that, unlike Huf Haus, they are not willing to do cheap (<€800k) projects. Huf can do smaller bungalows, which will be expensive per sqm but still less than a half out what Baufritz would be willing to consider.
For smaller stuff, in the UK there is https://wudl.co.uk, which builds pretty nice things. I also love https://www.echoliving.co.uk, although this is just a high-end cabin builder. Very different.
It varies. Mine's a designer, though she's also a licensed architect.
That's the experience / knowledge I'd want to hire for oversight.
I don't see how a designer is the best person for that but then maybe my idea about architects mostly being desk-bound designers focused on estatics is totally wrong?
There was an exception though, like 10 years ago where the doctor was removing a patient's appendix and damaged major artheries. The poor patient lost the leg and the other one is not functioning well. They've sued privately (and had top lawyers) and after a very long process they've kind of won some meagre settlement. What was actually interesting was the fact that the major regional hospital never had a "doctor's error" in the last 20 years, only so called "complications" (which was "nobody's fault").
Doctors (and similar) don't get insurance against damanages at all. Why would they?
More sarcasm, I assume?
Yep, it’s totally wrong. No doubt there are some architects/engineers who focus strictly on design. An architect/engineer is generally “in charge” of a construction project in the US, at least for commercial construction, which is the segment where most of the architects work.
I’m just a lowly subcontractor PM but the GC generally works for the architect/engineer.
Edit: New building projects will have multiple drawing sets: architectural, structural, civil, landscape, mechanical, electrical, plumbing, low voltage systems, fire protection, as well as others depending on the project specifics, but all of these engineers are coordinated by the architect.
Depends on the architect. Someone like Steve Baczek knows quite a bit about technical details, and actually puts them in his blueprints.
Around here they aren’t interested in projects under $5M.
They take on some personal responsibility for the way the construction project is handled (at least for the things that fall within their purview).
Pre-fab houses/ components do require more rigor for foundation etc.
What you want is a third party.
Someone who understands the trade and the codes and will check in on the building site daily and will make sure everything is being done correctly. And if it’s not, will stop work and put everyone in their place.
I frankly have no idea what the term for that is in America, but we call them freelance foremen where I’m from. Current going rate per month is roughly 1.5x minimum wage in my country.
May sound like a lot of money for someone just doing checking, but that’s only until you find out how expensive lack of oversight can be.
Ask around, many building companies offer these services, so company a builds the house, and an inspector from unrelated company b does the daily inspection. But ideally you’d find a one man band man, who’s really gonna be on your side.