News for hackers. Stuff that matters.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by downrightmike on Tuesday January 10, 2023 @01:08PM (#34328921)
Unfortunately, Mental illness is largely not the cause of gun violence like the media says it is, the issue is that there are so many guns out there that are so easy to get a hand on by anyone, that gun violence is so bad. And since JFK got rid of sanatoriums and expected the private companies to pick up the slack, 60 years ago, there will never be enough care as proven by the lack of care today. Sorry, we don't, nor will we ever, prioritize it enough to have any meaningful impact on gun violence. You take the weapons out of reach of people who would use them to do harm to others _first_, and only then can we make any progress on the issues. But too many companies and unscrupulous people are out there and they actively block and write legislation to make gun violence a certainty. Bad advertising and death is still good advertising to these people. As for 3D printed guns, we have a whole ATF bureau that should be on this just like they are on the illegal fully auto gun mods.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by ruined on Tuesday January 10, 2023 @01:14PM (#34329012)
3d printed guns are as difficult to control as media piracy, which is to say, it's impossible.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @01:31PM (#34329281)
Not true. A 3d printed gun won't do you any good unless you at least test it and probably not until you carry it around outside your home. Plenty of chances to get caught with an illegal firearm.

Between firearms being easier to detect than pirated media and police being a lot more motivated to go after them, 3D printed guns are quite controllable...

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by mgarfias on Tuesday January 10, 2023 @03:22PM (#34330908)
How’s the war on drugs working out?
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by bayesian_horse on Tuesday January 10, 2023 @08:43PM (#34334009)
Completely irrelevant response. Restricting access to guns has worked remarkably well to reduce loss of life virtually everywhere it has been tried and enacted somewhat competently.

Europe doesn't regularly see school children getting dismembered by assault-style rifles. Neither does Australia, and they tightened up their gun regulation relatively recently after they figured out they had a problem.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by maxwell on Tuesday January 10, 2023 @01:11PM (#34328979)
Unconstitutional.

We keep a gun behind every blade of grass for a reason.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by devwastaken on Tuesday January 10, 2023 @01:30PM (#34329263)
Try to legally get a handgun or semi-automatic rifle in the u.s. walk me through that process. You may be surprised to find that it's much harder than you claim it to be.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by briffle on Tuesday January 10, 2023 @01:55PM (#34329650)
My neighbor has been waiting since Dec 20th for his background check to complete, so he can get his new shotgun (not a handgun, not even a semi-automatic). Given how far back he is in line, and how much it moves in a day, he is looking at mid-february to get his shotgun. Our state is intentionally slow-walking all background checks while they try to win some court cases centered around some recent gun control ballot measures.

He has a concealed carry license, which means he already completed a very detailed background check within the last 2 years in our state, and usually, approval takes something like 10 min for concealed license holders since the already have your info.

Note that the federal law says if a background check takes more than 3 days, the dealer MAY give you the weapon, but most retail chains will not honor that, since they are worried about liability. That wording was put in to make sure that states and the FBI would not try to slow-walk things, under-hire, etc.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by ofrzeta on Tuesday January 10, 2023 @02:36PM (#34330310)
Having to wait two months doesn't seem particularly hard to me.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by notch656c on Tuesday January 10, 2023 @03:01PM (#34330672)
OP is likely from Oregon and it sounds like it could be very hard, as the delay may be imposed in association with needing further licensing after he misses the cutoff. It is my understanding there may not even be a way to get the license yet after he misses the cutoff.

AFAIK the new ballot approved scheme requires this currently unobtonium new permit even for those with a CCW, and this delay may push him into unobtanium being in force.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by mgarfias on Tuesday January 10, 2023 @03:24PM (#34330940)
My friends ex husband works at OSP’s firearms bg department. They’re being told (not in writing) to GO VERY SLOWLY. Like 1-2 per day, vs the 400 that is possible.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by Ancapistani on Tuesday January 10, 2023 @04:58PM (#34332153)
Would you feel the same way if you were a petite 20-year-old woman who was just threatened by your husband after filing for divorce and being granted a temporary restraining order against him?
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by notch656c on Tuesday January 10, 2023 @05:06PM (#34332231)
Of course! the TRO says the husband can't hurt you. And also revokes his right to guns.

That's why heinous characters like David Letterman got his 2A rights revoked for harrassing an innocent woman over the TV with secret coded messages. Protects women.

https://www.abqjournal.com/22051/1050am-letterman-tro-tossed...

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by ofrzeta on Tuesday January 10, 2023 @05:53PM (#34332658)
I am not sure if buying a gun is the adequate answer to this threat. However I am not a US citizen and I get the point. Sometimes, I guess, it's a good thing to delay the checks to let the people chill a bit until they get their gun. Also letting the 20-year-old woman buy a gun with no proper training might likely result in two casualties.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by acdha on Tuesday January 10, 2023 @08:54PM (#34334104)
Yes: someone in that situation is far more likely to be the victim of gun violence (the attacker can pick the time and place, everyone has to sleep, etc.). Having that violent ex unable to get a gun because the review process determined they were a high risk would save many lives in the U.S. every year.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by mgarfias on Tuesday January 10, 2023 @03:22PM (#34330920)
Oregon represent!
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by kaba0 on Tuesday January 10, 2023 @05:32PM (#34332488)
Why the hell would you need a shotgun?

Like, I am normally very anti-gun, but I do accept the premise that the cat is out of the bag in case of the US. But why not stick to small pistols for self-defense? Ok, let’s have some shooting range that has shotguns and whatnot in an ultra-secure manner for “fun”, but otherwise why would you need anything else at home?

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by hotpotamus on Tuesday January 10, 2023 @02:41PM (#34330386)
Huh? I have a sporting goods store in my neighborhood that I've bought a few from. You walk in, say I want it, fill out the form and pay your money. The checks add a few minutes, but it's not much different from buying a barbecue which they sell a few aisles down.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by rascul on Tuesday January 10, 2023 @08:31PM (#34333914)
Yes, this is how it is for me also. State laws vary greatly.
Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by hotpotamus on Tuesday January 10, 2023 @10:26PM (#34334693)
Interestingly in my state, scientific glassware was more restricted for a few years than guns were. I believe this law has been deprecated, probably in no small part due to irony.

https://www.homebrewtalk.com/threads/texas-brewers-erlenmeye...

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by karaterobot on Tuesday January 10, 2023 @01:46PM (#34329507)
> Unfortunately, Mental illness is largely not the cause of gun violence like the media says it is, the issue is that there are so many guns out there that are so easy to get a hand on by anyone, that gun violence is so bad.

This is close to the position I used to take. I now believe it's incorrect, mostly because (I am speaking of the United States in particular) you aren't going to get people to give up their guns. It's just not going to happen on a foreseeable timeline. Add in the existence of 3D printed firearms, and it becomes a laughable prospect. If you accept that as a premise, what do you do next if you want to reduce gun deaths? Probably what you should have done in the first place, which is to attack the cause rather than the method of death.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by Ancapistani on Tuesday January 10, 2023 @05:15PM (#34332315)
> you aren't going to get people to give up their guns

This is often overlooked in discussions around gun control on this board.

There are at a bare minimum tens of millions of gun owners in the US. A lot of them will simply not allow them to be taken, and will use whatever level of response is necessary to prevent that from happening.

I count myself among that group. I would rather die preserving the right to privately-owned weapons than willingly live in an environment where that right is not recognized. To be clear - that is not a figurative statement for me. I'm an extremely peaceful person who is deeply empathetic and do my best to help the people around me. I see violence as a last resort, but an option that is justified when there is no other alternative. In my experience, this is an extremely common perspective in "US gun culture".

If your motivation is to reduce violence and preserve human life, I am extremely confident that attempting widespread confiscation of firearms in the US would not be an effective strategy.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by notch656c on Tuesday January 10, 2023 @05:23PM (#34332396)
Door to door confiscation won't happen wholesale. Just gently classify more and more people (and weapons) as felons while simultaneously tightening the control noose.

The public doesn't support felons in ownership of firearms and the vast majority of them keep their gun shit under wraps rather than confront the disarmers. Eventually the parents die, kid finds the gun and doesn't want to lose his license to operate factory implement #1385 and tosses dads old gun in the lake.

Historically intense freedom, especially gun related, is associated with frontier nation kind of setting. I found this kind of setting in Kurdish controlled Syria, for instance. It's on the outs in the US which is such a safe place that we look for increasingly micromanaged ways to attempt more safety, like outlawing children walking to a playground.

I don't know America is necessarily wrong. It's just increasingly the wrong place for people like me. The new generation wants gun control, legislated safety, strong state presence, etc. The dinosaurs will conform, be pushed out, or tossed in a cage. I question which will be my fate.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by yellowapple on Tuesday January 10, 2023 @02:42PM (#34330395)
> You take the weapons out of reach of people who would use them to do harm to others _first_, and only then can we make any progress on the issues.

Translation: "we'll disarm who we please and demand that you wait until we're satisfied before we start tackling the actual issues driving violence and suicide"

Nah, that ain't how this works. We as a society can and should be addressing the systemic causes of violent crime and suicide now; punting on that on the basis of "but bad people still have guns" is reprehensible.

Re:Untraceable 3D-printed 'ghost guns' on the rise in Canada by allanmacgregor on Wednesday January 11, 2023 @07:19AM (#34337600)
This is about Canada; I know is shocking but is a different country than the US. The gun regulations and laws and culture is very different from the good ol' USA.