Re:New research shows hydrogen-reduced iron has superior pro...
by seunosewa on Wednesday October 12, 2022 @10:31AM
(#33177528)
The claim is that "Hydrogen-reduced carbon-free DRI is highly metallized and has superior mechanical and aging properties compared to direct reduced iron using fossil-based reducing gas such as natural gas." I wish there were more details.
Re:New research shows hydrogen-reduced iron has superior pro...
by lazide on Wednesday October 12, 2022 @11:25AM
(#33178357)
Hydrogen is well known and studied to cause many issues with steel, generally brittleness and crystal structure defects. In situations where it’s important that cracking doesn’t occur, it’s common for low/no hydrogen electrodes in welding be required, for instance.
That using a method of production that naturally exposes it hydrogen would produce higher quality steel is surprising! We should still definitely have a link to the study!
Re:New research shows hydrogen-reduced iron has superior pro...
by lazide on Wednesday October 12, 2022 @12:22PM
(#33179249)
What do you think Steel is, but reduced Iron (to a specific level)?
Cast Iron is also impacted by hydrogen embrittlement, albeit iron is usually already pretty brittle so folks don’t use it where that kind of failure matters as much.
Re:New research shows hydrogen-reduced iron has superior pro...
by lazide on Wednesday October 12, 2022 @03:13PM
(#33181641)
If you're talking pure iron, then yes - it's very ductile and malleable. However, the low end of carbon allowed while still calling something steel is .3%, so with a few exceptions (wrought iron, which is arguably very soft steel), it's rare to run across it.
There are of course ways to treat cast iron so it's decently durable (ductile iron), but it's still pretty brittle compared to 99% of steel in the real world.
Re:New research shows hydrogen-reduced iron has superior pro...
by robocat on Wednesday October 12, 2022 @08:34PM
(#33185708)
> low end of carbon allowed while still calling something steel is .3%
Incorrect. That is the maximum for low carbon steel (also called mild steel - the most common form of steel).
Wikipedia says “The carbon content of steel is between 0.002% and 2.14% by weight for plain carbon steel”. “Plain carbon-iron alloys with a higher than 2.1% carbon content are known as cast iron.”
Re:New research shows hydrogen-reduced iron has superior pro...
by dodobirdlord on Wednesday October 12, 2022 @11:44AM
(#33178676)
This is a process for refining iron ore, as opposed to using a blast furnace, or using the same process with decomposed natural gas instead of just hydrogen. In steel production it would be subsequently smelted.
Re:New research shows hydrogen-reduced iron has superior pro...
by photochemsyn on Wednesday October 12, 2022 @12:57PM
(#33179759)
This process produces sponge iron, which is then fed into an electric arc furnace. There is no free hydrogen around at that point. Whatcomes out of an electric arc furnace is carbon steel.
The issue with hydrogen (first noted IIRC in the high-pressure Haber-Bosch ammonia production process, in which H2 and N2 at high pressure over a catalyst in a steel chamber forms NH3) is that free hydrogen reacts with the carbon in the steel under these conditions, which caused the pressure chambers to regularly explode (solution was a sacrificial lining of the chambers which was regularly replaced). For low-pressure H2 it may not be much of a problem, but that's not very efficient for transport.
Re:New research shows hydrogen-reduced iron has superior pro...
by photochemsyn on Thursday October 13, 2022 @09:03AM
(#33190401)
Ammonia as fertilizer is the only ammonia economy that makes sense; hydrogen economy doesn't make much sense either. Methane economy is the optional long-term solution for chemical energy sources, just CO2(atm) + H2 (water) -> CH4.
Ammonia combustion generates NOx smog, and ammonia is pretty toxic to store and transport as a gas. For fertilizer it's stored as (NH4)(NO3) or similar.
Hydrogen production has a few major use cases, but replacing natural gas is not one of them. Iron reduction, nitrogen reduction, carbon reduction, in industrial settings, is about it.
Re:New research shows hydrogen-reduced iron has superior pro...
by jbay808 on Wednesday October 12, 2022 @06:20PM
(#33184414)
For what it's worth to reduce surprise/skepticism, a hydrogen atmosphere is already commonly used for annealing electrical steels (eg. motor laminations or magnetic parts).
Re:New research shows hydrogen-reduced iron has superior pro...
by ghastmaster on Wednesday October 12, 2022 @11:37AM
(#33178569)
Using natural gas introduces carbon. After the DRI stage, further treatments would be required to remove the carbon as it oxidizes. With less carbon there should be more consistent oxidizing of the iron, especially since it looks like carbon monoxide(from the natural gas) is not required which would introduce unwanted oxygen. I wish there were more details as well.
Re:New research shows hydrogen-reduced iron has superior pro...
by LarsAlereon on Wednesday October 12, 2022 @12:06PM
(#33179027)
The thing is you usually WANT Carbon in your Iron, so if you use Hydrogen DRI you have to further process the Iron to add the Carbon back in. There's a lot of potential for using mixtures of Hydrogen and Natural Gas to produce Iron with the exact desired Carbon content.
Re:New research shows hydrogen-reduced iron has superior pro...
by ghastmaster on Wednesday October 12, 2022 @12:19PM
(#33179212)
Carbon is wanted for steel production, but at specific levels. DRI is further worked to oxidize carbon and remove it before processing. Eliminating the carbon/oxygen from natural gas reduction allows a more controlled introduction of carbon and or less processing to make ready for steel production.
Re:New research shows hydrogen-reduced iron has superior pro...
by moron4hire on Wednesday October 12, 2022 @12:17PM
(#33179186)
It seems to me that, when you want carbon in your iron (to make steel), you want a lot of control over how much carbon is in that steel. To start from a base iron that has no carbon in it whatsoever seems like it would be better for being more precise in your steel production.
Re:New research shows hydrogen-reduced iron has superior pro...
by LarsAlereon on Wednesday October 12, 2022 @12:31PM
(#33179377)
While you certainly can add or remove Carbon during processing, you get the lowest costs if your input Iron is as close as possible to the desired Carbon content for your application.
Re:New research shows hydrogen-reduced iron has superior pro...
by metal_am on Wednesday October 12, 2022 @02:43PM
(#33181223)
Steel is an incredible massive category. For high quality steels (duplex, maraging, PH stainless), you actually don't want much carbon. Since they talk about "aging properties" in the article, I'd imagine they're targeting the nicer stuff. This doesn't seem like a process intended for cheap steel.
Re:New research shows hydrogen-reduced iron has superior pro...
by actionfromafar on Wednesday October 12, 2022 @11:23AM
(#33178337)
Maybe not but the hydrogen process is probably a game changer regardless, because there is less research and productisation needed. It is similar to existing processes.
It’s also perfectly positioned to take advantage of wind power. The gas storage tanks can make up for variations in electricity production. It’s all set to be deployed at a large scale already.
Watt for watt it might not (I have no idea) be as efficient as electrolysis, but as a total solution I see how it could be deployed at scale. Combined with the advances in electric mining equipment like what Volvo is offering, the industry is all set to go fully carbon neutral and electric. (No tech hurdles left.)
Re:New research shows hydrogen-reduced iron has superior pro...
by pfdietz on Wednesday October 12, 2022 @11:26AM
(#33178382)
It's not just a question of efficiency. How expensive is the equipment? And in particular, if it's using intermittently available power, how expensive is the part that must be ready to absorb that power? For hydrogen it's electrolysers (and perhaps compressors); for that scheme it would be the oxide electrolysis cells.
Re:New research shows hydrogen-reduced iron has superior pro...
by jl6 on Wednesday October 12, 2022 @12:00PM
(#33178930)
I recently came across Boston Metal’s proposed use of this inert anode material but I couldn’t find much detail on whether the “breakthrough” claim was genuine. It still seems early days, though if true it would be a transformative enabler for the production of low-carbon steel.
Re:New research shows hydrogen-reduced iron has superior pro...
by lvxferre on Wednesday October 12, 2022 @12:06PM
(#33179030)
What the link is "conveniently forgetting" to mention is that most industrial hydrogen production emits CO₂ (steam reforming: CH₄ + 2H₂O → 2H₂ + CO₂). And there's a good reason for that: electrolysis consumes a lot of electricity. I won't do the maths here but, if the electricity was generated through fossil fuels, I wouldn't be surprised if the process actually increased CO₂ emissions instead of reducing them.
But let's say that the hydrogen is from fossil-free electricity. You could be plugging that fossil-free electricity elsewhere instead. The press and media link does not mention that.
>Hydrogen-reduced carbon-free DRI is highly metallized
That can mean two things:
1. They're able to retrieve more iron from the oxide. Good, but it isn't enough to replace the current processes; at most to add hydrogen as the "chef's kiss" to the iron produced through another method.
2. Less cementite aka iron carbide aka the stuff that actually makes steel "steel" instead of plain iron. That's great or awful depending on application.
>has superior mechanical [...] properties
Again, it depends on application. I expect their iron to be rather soft and malleable, but lacking tensile strength.
>This new knowledge is a direct result of close value chain cooperation, determined innovative thinking and bold efforts in piloting new technology – a recipe to copy for other industrial sectors,”
>Hybrit Development AB has filed patent applications describing the included inventions to the European Patent Office.
"Guys, we made something to copy for other industrial sectors, except that we're smearing patents on it so you can't copy the process~".
There's another detail that the press and media link doesn't mention: hydrogen makes steel brittle.
Re:New research shows hydrogen-reduced iron has superior pro...
by lvxferre on Wednesday October 12, 2022 @08:39PM
(#33185745)
>Sweden, where this facility is supposed to be built, hardly has any fossil fuel electricity production.
That would make their process suitable for countries that barely produce any iron to begin with. Unlike countries actually responsible for a big chunk of the world's iron production¹, and heavily reliant on fossil fuels; such as China, Japan, India, Russia.
>Also you should compare the natural gas hydrogen process to the currently used coke process.
No, I shouldn't. For three reasons: a) everybody knows that the "traditional" coke process is nasty, and is looking for alternatives; b) other alternatives already exist, as syngas-based³; and 3) the resulting iron is slightly different in properties.
Could the method from the link become more attractive in the future? Sure. Even then I strongly suggest everyone to hold their horses before going "WOOO THAT BIZNIZ SAID THAT THEY'RE CHANGING THE WORLD!!1". There's no "exciting" development yet.
Re:New research shows hydrogen-reduced iron has superior pro...
by danans on Wednesday October 12, 2022 @02:09PM
(#33180736)
> I won't do the maths here but, if the electricity was generated through fossil fuels, I wouldn't be surprised if the process actually increased CO₂ emissions instead of reducing them.
> But let's say that the hydrogen is from fossil-free electricity. You could be plugging that fossil-free electricity elsewhere instead.
This assumes a zero-sum situation where we have a fixed amount of fossil free electricity, but that's unlikely because fossil free energy (solar specifically) is the cheapest type of electricity generation we can build today.
Furthermore, the hydrogen can be electrolyzed at times when the supply of fossil free energy exceeds demand, thereby actually improving the economics of intermittent renewables by increasing their overall utilization, and hence incentivizing building more if it.
Re:New research shows hydrogen-reduced iron has superior pro...
by belorn on Wednesday October 12, 2022 @07:08PM
(#33184982)
This is Sweden and almost at the most northern part of it. It is located a relative short distance from the polar circle. Solar is a very cheap form of electricity but it has some significant problems to overcome that far up north.
Hydro, nuclear and wind is what northern Sweden uses.
Re:New research shows hydrogen-reduced iron has superior pro...
by danans on Thursday October 13, 2022 @11:36AM
(#33192449)
Sure, but subsequent plants needn't be built in Northern Sweden. It would make a lot of sense to build them in other areas with lots of green power potential.
Re:New research shows hydrogen-reduced iron has superior pro...
by belorn on Thursday October 13, 2022 @05:17AM
(#33188891)
The plant is near the mines in northern Sweden. They could in theory be transporting the hydrogen, but hydrogen can be a bit tricky to transport and it obviously would cost more money. The green hydrogen process is also fairly expensive right now (despite what people might say), and the cost is not just attached to the electricity price. They had a person from the project discuss the value proposition just a few weeks ago in Swedish news. Green steel need both subsidies and green credits, but even so the end cost is landing at a few percent higher than regular steel. The argument was that even if it cost more its better for the environment, and this is a pilot program so maybe the cost will continue down in the future.
Re:New research shows hydrogen-reduced iron has superior pro...
by lvxferre on Wednesday October 12, 2022 @07:39PM
(#33185251)
>This assumes a zero-sum situation where we have a fixed amount of fossil free electricity
I'm not assuming a zero-sum. The concern still holds without a zero-sum situation, as long as some commonly used sources of energy are not fossil-free.
>but that's unlikely because fossil free energy (solar specifically) is the cheapest type of electricity generation we can build today.
Higher demand can increase prices. Usually this wouldn't be a problem, but considering how big the iron/steel production sector is, the impact of the electricity used for the H₂ be measured, not assumed.
>Furthermore, the hydrogen can be electrolyzed at times when the supply of fossil free energy exceeds demand, thereby actually improving the economics of intermittent renewables by increasing their overall utilization, and hence incentivizing building more if it.
That is actually a fair argument. Unlike the above.
Re:New research shows hydrogen-reduced iron has superior pro...
by danans on Wednesday October 12, 2022 @10:39PM
(#33186502)
> Higher demand can increase prices.
Sure, but absent material supply constraints for production of PV and wind (of which none exist), supply will respond to that demand as it always has.
Using green hydrolyzed H2 for making steel makes more sense because our only alternative for steel is to use coal to produce it, which we know is terrible from a C02 emissions perspective.
Re:New research shows hydrogen-reduced iron has superior pro...
by thehappypm on Wednesday October 12, 2022 @03:07PM
(#33181566)
Personally, I don’t see industrial processes like these as a priority for reducing CO2 emissions. If we get to a point where all the heavy emitters like cars and power plants are carbon neutral, things like steel production will be a tiny contributor to climate change, and can probably be better managed through capture and sequestration if the world decides every molecule of CO2 is harmful.
Re:New research shows hydrogen-reduced iron has superior pro...
by kristianp on Wednesday October 12, 2022 @06:45PM
(#33184716)
Depending on which source you look at, steel production accounts for 8% - 11% of global CO2 emissions. According to Gate's 2021 book, 'getting around' (planes, trucks, cargo ships) accounts for 16% of CO2 emissions. So steel production is definitely a significant contributor.
Re:New research shows hydrogen-reduced iron has superior pro...
by thehappypm on Wednesday October 12, 2022 @08:01PM
(#33185436)
I get that, but steel is kind of “worth it”. Civilization can’t function without steel right now. Meanwhile energy has a gazillion alternatives. Priorities.
Re:New research shows hydrogen-reduced iron has superior pro...
by metal_am on Wednesday October 12, 2022 @03:09PM
(#33181590)
Reading between the lines, it seems like this is intended for high quality steels. Think aerospace, not buildings. Actually in those applications, you don't really want carbon. The strongest steels have virtually no carbon. Hydrogen embrittlement and cracking have nothing to do with this.
Re:New research shows hydrogen-reduced iron has superior pro...
by JoachimS on Wednesday October 12, 2022 @12:25PM
(#33179296)
The press release from Vattenfall relates to a research program called Hybrit. Vattenfall (an energy company), together with the iron ore company LKAB, the steel manufacturer SSAB, and Luleå University of Luleå (LTU) are partners in the project.
Re:New research shows hydrogen-reduced iron has superior pro...
by photochemsyn on Wednesday October 12, 2022 @12:32PM
(#33179392)
Here's a good steel production flowchart that shows where this process would be used (replace the natural gas-powered direct reduction feed-in to the electric arc furnace with a hydrogen-powered direct-reduction step). Overall, it's part of the electric arc process which avoids the need for coke from coal in blast furnaces.
Of course, making this fossil-fuel free requires significant hydrogen production from sources like hydropower (or nuclear) powered electrolyis, or my favorite, photoelectrochemical reduction of water, such as:
As far as the claims about producing a superior product with hydrogen compared to natural gas, that's hard to evaluate without more data. I imagine quality of the incoming ore is a major factor. If you want a technical paper on it, here's something recent from what looks like a China-Germany research collaboration:
"(2021) Influence of microstructure and atomic-scale chemistry on the direct
reduction of iron ore with hydrogen at 700°C"
P.S. The issue of hydrogen embrittlement of steel doesn't apply here, although it is a major issue that doesn't bode that well for replacing natural gas with hydrogen anywhere other than in industrial processes where the hydrogen is being consumed almost as fast as it is produced. Making synthetic natural gas from atmospheric CO2 and water-sourced hydrogen is a (currently expensive) option, however.
Re:New research shows hydrogen-reduced iron has superior pro...
by ncmncm on Wednesday October 12, 2022 @03:55PM
(#33182180)
It is substantially more efficient, by unit of collecting area, to produce electricity using a regular solar panel and then electrolyse water for hydrogen. But of course collection area efficiency is not what matters, cost is. We don't know what the electrophotochemical equipment costs, or how that compares. It does seem more elegant, at a remove.
In practice, of course, you drive your electrolyser from solar, wind, hydro, geo, tidal, numerous forms of storage, or an unholy mix of all of them at different times -- whatever comes off the grid. At first, it will include NG sometimes, and nukes, until those are priced off of the market.
Re:New research shows hydrogen-reduced iron has superior pro...
by pstuart on Wednesday October 12, 2022 @09:32PM
(#33186105)
The photoelectrochemical reduction of water looks interesting -- what do you think the achievable efficiency of it might be and is there an existing path to commercialize the technology?
Also, would that work in a concentrated solar setup?
Re:New research shows hydrogen-reduced iron has superior pro...
by mcswell on Wednesday October 12, 2022 @09:08PM
(#33185950)
From the article: "One element behind the high quality of the sponge iron produced is the high-quality iron ore from LKAB’s mine..." So would this process produce high quality sponge iron from iron ore of lesser quality from other mines?
That using a method of production that naturally exposes it hydrogen would produce higher quality steel is surprising! We should still definitely have a link to the study!
Cast Iron is also impacted by hydrogen embrittlement, albeit iron is usually already pretty brittle so folks don’t use it where that kind of failure matters as much.
There are of course ways to treat cast iron so it's decently durable (ductile iron), but it's still pretty brittle compared to 99% of steel in the real world.
Incorrect. That is the maximum for low carbon steel (also called mild steel - the most common form of steel).
Wikipedia says “The carbon content of steel is between 0.002% and 2.14% by weight for plain carbon steel”. “Plain carbon-iron alloys with a higher than 2.1% carbon content are known as cast iron.”
https://en.m.wikipedia.org/wiki/Steel
https://en.m.wikipedia.org/wiki/Pig_iron
https://en.m.wikipedia.org/wiki/Cast_iron
https://en.m.wikipedia.org/wiki/Carbon_steel
https://en.m.wikipedia.org/wiki/Alloy_steel
The issue with hydrogen (first noted IIRC in the high-pressure Haber-Bosch ammonia production process, in which H2 and N2 at high pressure over a catalyst in a steel chamber forms NH3) is that free hydrogen reacts with the carbon in the steel under these conditions, which caused the pressure chambers to regularly explode (solution was a sacrificial lining of the chambers which was regularly replaced). For low-pressure H2 it may not be much of a problem, but that's not very efficient for transport.
Ammonia combustion generates NOx smog, and ammonia is pretty toxic to store and transport as a gas. For fertilizer it's stored as (NH4)(NO3) or similar.
Hydrogen production has a few major use cases, but replacing natural gas is not one of them. Iron reduction, nitrogen reduction, carbon reduction, in industrial settings, is about it.
https://www.tlclam.net/annealing-process/
https://www.vac-met.com/hydrogen-annealing/
https://europepmc.org/article/med/23657254
which led to an NSF grant:
https://www.nsf.gov/awardsearch/showAward?AWD_ID=1534664
which spawned a startup that is now seeking private investors:
https://www.bostonmetal.com/transforming-metal-production/
It’s also perfectly positioned to take advantage of wind power. The gas storage tanks can make up for variations in electricity production. It’s all set to be deployed at a large scale already.
Watt for watt it might not (I have no idea) be as efficient as electrolysis, but as a total solution I see how it could be deployed at scale. Combined with the advances in electric mining equipment like what Volvo is offering, the industry is all set to go fully carbon neutral and electric. (No tech hurdles left.)
But let's say that the hydrogen is from fossil-free electricity. You could be plugging that fossil-free electricity elsewhere instead. The press and media link does not mention that.
>Hydrogen-reduced carbon-free DRI is highly metallized
That can mean two things:
1. They're able to retrieve more iron from the oxide. Good, but it isn't enough to replace the current processes; at most to add hydrogen as the "chef's kiss" to the iron produced through another method.
2. Less cementite aka iron carbide aka the stuff that actually makes steel "steel" instead of plain iron. That's great or awful depending on application.
>has superior mechanical [...] properties
Again, it depends on application. I expect their iron to be rather soft and malleable, but lacking tensile strength.
>This new knowledge is a direct result of close value chain cooperation, determined innovative thinking and bold efforts in piloting new technology – a recipe to copy for other industrial sectors,”
>Hybrit Development AB has filed patent applications describing the included inventions to the European Patent Office.
"Guys, we made something to copy for other industrial sectors, except that we're smearing patents on it so you can't copy the process~".
There's another detail that the press and media link doesn't mention: hydrogen makes steel brittle.
______________________________________________________________
Take this link with a grain of salt.
Also you should compare the natural gas hydrogen process to the currently used coke process.
https://en.wikipedia.org/wiki/File:Electricity_production_in...
That would make their process suitable for countries that barely produce any iron to begin with. Unlike countries actually responsible for a big chunk of the world's iron production¹, and heavily reliant on fossil fuels; such as China, Japan, India, Russia.
>Also you should compare the natural gas hydrogen process to the currently used coke process.
No, I shouldn't. For three reasons: a) everybody knows that the "traditional" coke process is nasty, and is looking for alternatives; b) other alternatives already exist, as syngas-based³; and 3) the resulting iron is slightly different in properties.
Could the method from the link become more attractive in the future? Sure. Even then I strongly suggest everyone to hold their horses before going "WOOO THAT BIZNIZ SAID THAT THEY'RE CHANGING THE WORLD!!1". There's no "exciting" development yet.
_____________
1. Source: https://en.wikipedia.org/wiki/Iron#Industrial_production
2. Refer to https://ourworldindata.org/grapher/exports/share-electricity...
3. Note that syngas still uses coke, but as a DRI method it uses it more efficiently.
This assumes a zero-sum situation where we have a fixed amount of fossil free electricity, but that's unlikely because fossil free energy (solar specifically) is the cheapest type of electricity generation we can build today.
Furthermore, the hydrogen can be electrolyzed at times when the supply of fossil free energy exceeds demand, thereby actually improving the economics of intermittent renewables by increasing their overall utilization, and hence incentivizing building more if it.
Hydro, nuclear and wind is what northern Sweden uses.
> Solar is a very cheap form of electricity but it has some significant problems to overcome that far up north.
Why would the hydrogen-reduced steel need to only be produced in Northern Sweden? It could just as well be produced somewhere with abundant solar.
I'm not assuming a zero-sum. The concern still holds without a zero-sum situation, as long as some commonly used sources of energy are not fossil-free.
>but that's unlikely because fossil free energy (solar specifically) is the cheapest type of electricity generation we can build today.
Higher demand can increase prices. Usually this wouldn't be a problem, but considering how big the iron/steel production sector is, the impact of the electricity used for the H₂ be measured, not assumed.
>Furthermore, the hydrogen can be electrolyzed at times when the supply of fossil free energy exceeds demand, thereby actually improving the economics of intermittent renewables by increasing their overall utilization, and hence incentivizing building more if it.
That is actually a fair argument. Unlike the above.
Sure, but absent material supply constraints for production of PV and wind (of which none exist), supply will respond to that demand as it always has.
Using green hydrolyzed H2 for making steel makes more sense because our only alternative for steel is to use coal to produce it, which we know is terrible from a C02 emissions perspective.
For more details about Hybrir see: https://www.hybritdevelopment.se/en/a-fossil-free-future/ https://www.hybritdevelopment.se/en/research-project-1/
The research group list of papers (not all of them related to Hybrit): https://www.ltu.se/research/subjects/Processmetallurgi/Publi...<
A working paper related to Hybrit: https://cdn.sei.org/wp-content/uploads/2020/07/bigger-is-som...
https://www.steel.org/steel-technology/steel-production/
Of course, making this fossil-fuel free requires significant hydrogen production from sources like hydropower (or nuclear) powered electrolyis, or my favorite, photoelectrochemical reduction of water, such as:
https://techxplore.com/news/2017-08-decades-technology-nrel-...
As far as the claims about producing a superior product with hydrogen compared to natural gas, that's hard to evaluate without more data. I imagine quality of the incoming ore is a major factor. If you want a technical paper on it, here's something recent from what looks like a China-Germany research collaboration:
https://sci-hub.se/10.1016/j.actamat.2021.116933
"(2021) Influence of microstructure and atomic-scale chemistry on the direct reduction of iron ore with hydrogen at 700°C"
P.S. The issue of hydrogen embrittlement of steel doesn't apply here, although it is a major issue that doesn't bode that well for replacing natural gas with hydrogen anywhere other than in industrial processes where the hydrogen is being consumed almost as fast as it is produced. Making synthetic natural gas from atmospheric CO2 and water-sourced hydrogen is a (currently expensive) option, however.
In practice, of course, you drive your electrolyser from solar, wind, hydro, geo, tidal, numerous forms of storage, or an unholy mix of all of them at different times -- whatever comes off the grid. At first, it will include NG sometimes, and nukes, until those are priced off of the market.
Also, would that work in a concentrated solar setup?
No need for a hydrogen in-between step, just electricity.