News for hackers. Stuff that matters.
Re:New research shows hydrogen-reduced iron has superior pro... by seunosewa on Wednesday October 12, 2022 @10:31AM (#33177528)
The claim is that "Hydrogen-reduced carbon-free DRI is highly metallized and has superior mechanical and aging properties compared to direct reduced iron using fossil-based reducing gas such as natural gas." I wish there were more details.
Re:New research shows hydrogen-reduced iron has superior pro... by aardvarkr on Wednesday October 12, 2022 @10:54AM (#33177872)
Agreed. This claim is so vague, and it sounds like this is just one part of the smelting process.
Re:New research shows hydrogen-reduced iron has superior pro... by ortusdux on Wednesday October 12, 2022 @11:05AM (#33178028)
Yes, there is little value in a press release about research that does not include a link or refence to said research.
Re:New research shows hydrogen-reduced iron has superior pro... by lazide on Wednesday October 12, 2022 @11:25AM (#33178357)
Hydrogen is well known and studied to cause many issues with steel, generally brittleness and crystal structure defects. In situations where it’s important that cracking doesn’t occur, it’s common for low/no hydrogen electrodes in welding be required, for instance.

That using a method of production that naturally exposes it hydrogen would produce higher quality steel is surprising! We should still definitely have a link to the study!

Re:New research shows hydrogen-reduced iron has superior pro... by yborg on Wednesday October 12, 2022 @11:30AM (#33178442)
This process produces direct reduced iron, not steel.
Re:New research shows hydrogen-reduced iron has superior pro... by lazide on Wednesday October 12, 2022 @12:22PM (#33179249)
What do you think Steel is, but reduced Iron (to a specific level)?

Cast Iron is also impacted by hydrogen embrittlement, albeit iron is usually already pretty brittle so folks don’t use it where that kind of failure matters as much.

Re:New research shows hydrogen-reduced iron has superior pro... by metal_am on Wednesday October 12, 2022 @02:47PM (#33181270)
It produces an intermediate product. You can't use it without further processing. In any case, the hydrogen won't be a problem.
Re:New research shows hydrogen-reduced iron has superior pro... by xyzzyz on Wednesday October 12, 2022 @03:03PM (#33181508)
You mean, cast iron is pretty brittle. Pure iron is not brittle.
Re:New research shows hydrogen-reduced iron has superior pro... by lazide on Wednesday October 12, 2022 @03:13PM (#33181641)
If you're talking pure iron, then yes - it's very ductile and malleable. However, the low end of carbon allowed while still calling something steel is .3%, so with a few exceptions (wrought iron, which is arguably very soft steel), it's rare to run across it.

There are of course ways to treat cast iron so it's decently durable (ductile iron), but it's still pretty brittle compared to 99% of steel in the real world.

Re:New research shows hydrogen-reduced iron has superior pro... by robocat on Wednesday October 12, 2022 @08:34PM (#33185708)
> low end of carbon allowed while still calling something steel is .3%

Incorrect. That is the maximum for low carbon steel (also called mild steel - the most common form of steel).

Wikipedia says “The carbon content of steel is between 0.002% and 2.14% by weight for plain carbon steel”. “Plain carbon-iron alloys with a higher than 2.1% carbon content are known as cast iron.”

https://en.m.wikipedia.org/wiki/Steel

https://en.m.wikipedia.org/wiki/Pig_iron

https://en.m.wikipedia.org/wiki/Cast_iron

https://en.m.wikipedia.org/wiki/Carbon_steel

https://en.m.wikipedia.org/wiki/Alloy_steel

Re:New research shows hydrogen-reduced iron has superior pro... by dodobirdlord on Wednesday October 12, 2022 @11:44AM (#33178676)
This is a process for refining iron ore, as opposed to using a blast furnace, or using the same process with decomposed natural gas instead of just hydrogen. In steel production it would be subsequently smelted.
Re:New research shows hydrogen-reduced iron has superior pro... by lazide on Wednesday October 12, 2022 @12:23PM (#33179273)
Do you think that removes the concern? I don’t see how it would.
Re:New research shows hydrogen-reduced iron has superior pro... by photochemsyn on Wednesday October 12, 2022 @12:57PM (#33179759)
This process produces sponge iron, which is then fed into an electric arc furnace. There is no free hydrogen around at that point. Whatcomes out of an electric arc furnace is carbon steel.

The issue with hydrogen (first noted IIRC in the high-pressure Haber-Bosch ammonia production process, in which H2 and N2 at high pressure over a catalyst in a steel chamber forms NH3) is that free hydrogen reacts with the carbon in the steel under these conditions, which caused the pressure chambers to regularly explode (solution was a sacrificial lining of the chambers which was regularly replaced). For low-pressure H2 it may not be much of a problem, but that's not very efficient for transport.

Re:New research shows hydrogen-reduced iron has superior pro... by lazide on Wednesday October 12, 2022 @03:14PM (#33181658)
Thanks for the background! So likely due to the complete remelt and re-alloying expected, it should work out?
Re:New research shows hydrogen-reduced iron has superior pro... by pstuart on Wednesday October 12, 2022 @09:34PM (#33186118)
Speaking of ammonia, any thoughts to share on an ammonia economy vs hydrogen economy? The former seems a lot more practical.
Re:New research shows hydrogen-reduced iron has superior pro... by photochemsyn on Thursday October 13, 2022 @09:03AM (#33190401)
Ammonia as fertilizer is the only ammonia economy that makes sense; hydrogen economy doesn't make much sense either. Methane economy is the optional long-term solution for chemical energy sources, just CO2(atm) + H2 (water) -> CH4.

Ammonia combustion generates NOx smog, and ammonia is pretty toxic to store and transport as a gas. For fertilizer it's stored as (NH4)(NO3) or similar.

Hydrogen production has a few major use cases, but replacing natural gas is not one of them. Iron reduction, nitrogen reduction, carbon reduction, in industrial settings, is about it.

Re:New research shows hydrogen-reduced iron has superior pro... by pstuart on Thursday October 13, 2022 @10:44AM (#33191689)
Thanks!
Re:New research shows hydrogen-reduced iron has superior pro... by jbay808 on Wednesday October 12, 2022 @06:20PM (#33184414)
For what it's worth to reduce surprise/skepticism, a hydrogen atmosphere is already commonly used for annealing electrical steels (eg. motor laminations or magnetic parts).

https://www.tlclam.net/annealing-process/

https://www.vac-met.com/hydrogen-annealing/

Re:New research shows hydrogen-reduced iron has superior pro... by ghastmaster on Wednesday October 12, 2022 @11:37AM (#33178569)
Using natural gas introduces carbon. After the DRI stage, further treatments would be required to remove the carbon as it oxidizes. With less carbon there should be more consistent oxidizing of the iron, especially since it looks like carbon monoxide(from the natural gas) is not required which would introduce unwanted oxygen. I wish there were more details as well.
Re:New research shows hydrogen-reduced iron has superior pro... by LarsAlereon on Wednesday October 12, 2022 @12:06PM (#33179027)
The thing is you usually WANT Carbon in your Iron, so if you use Hydrogen DRI you have to further process the Iron to add the Carbon back in. There's a lot of potential for using mixtures of Hydrogen and Natural Gas to produce Iron with the exact desired Carbon content.
Re:New research shows hydrogen-reduced iron has superior pro... by ghastmaster on Wednesday October 12, 2022 @12:19PM (#33179212)
Carbon is wanted for steel production, but at specific levels. DRI is further worked to oxidize carbon and remove it before processing. Eliminating the carbon/oxygen from natural gas reduction allows a more controlled introduction of carbon and or less processing to make ready for steel production.
Re:New research shows hydrogen-reduced iron has superior pro... by moron4hire on Wednesday October 12, 2022 @12:17PM (#33179186)
It seems to me that, when you want carbon in your iron (to make steel), you want a lot of control over how much carbon is in that steel. To start from a base iron that has no carbon in it whatsoever seems like it would be better for being more precise in your steel production.
Re:New research shows hydrogen-reduced iron has superior pro... by LarsAlereon on Wednesday October 12, 2022 @12:31PM (#33179377)
While you certainly can add or remove Carbon during processing, you get the lowest costs if your input Iron is as close as possible to the desired Carbon content for your application.
Re:New research shows hydrogen-reduced iron has superior pro... by moron4hire on Thursday October 13, 2022 @11:23AM (#33192286)
Again, it seems to me that, if you care about extreme precision in your steel-making process, cost is the least of your worries.
Re:New research shows hydrogen-reduced iron has superior pro... by metal_am on Wednesday October 12, 2022 @02:43PM (#33181223)
Steel is an incredible massive category. For high quality steels (duplex, maraging, PH stainless), you actually don't want much carbon. Since they talk about "aging properties" in the article, I'd imagine they're targeting the nicer stuff. This doesn't seem like a process intended for cheap steel.